Used Kern Kraft Kkf470/6 for sale (50,128)

Year of construction: 2008, condition: ready for operation (used), Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible. Ledpfx Aoztzqnscfeaf

Year of construction: 2024, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, DESTACO pneumatic power cylinder WK3000-30-6-1. Item no. 0576762. Piston force at 6 bar: 3000N. Max. clamping force: 30,000N. Further information available in the images. Purchased in 2024 for testing purposes only. Inspection is possible. Sold without warranty or return. Lodpfx Aovb Di Tocfsaf

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Laedpfx Aezvxkqocfof Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: new, kern-kfp-v20-ip65 Please note that the display is not included in the scope of delivery. Ledpfx Acjztxcuefjaf - Weighing platform made of stainless steel. - The floor scale is made of aluminum and has a silicone coating, IP65, OIML-R60 approval, Class III, 3000 e. - The adjustable feet ensure perfect balance, allowing for accurate results.

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm Ljdpfx Aezp Rvljcfeaf rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) - incl. spare parts package - NO additional tools included

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) Ledpfxezpfgfe Acfjaf TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm Laodpfx Acezi Duhefof - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 2019, functionality: unexamined, spindle bore: 82 mm, turning diameter: 560 mm, turning length: 1,900 mm, quill stroke: 150 mm, quill diameter: 75 mm, total length: 3,830 mm, total width: 1,750 mm, total height: 1,620 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 7 rpm, overall weight: 2,850 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 8 m/min, workpiece weight (max.): 400 kg, three-jaw chuck diameter: 250 mm, KRAFT TURNING CENTER ZDM 560Z × 2.000 – USED, TECHNICALLY ALMOST LIKE NEW A KRAFT turning center ZDM 560Z × 2.000, manufactured in 2015, from a private owner. Since its purchase, it has only been operated in a maximum of one shift, and in practice, significantly less. Identical in design to our current new machines ZDM 560, but at a fraction of the cost of a new investment. From a business liquidation. On-site inspection is possible at any time and is highly recommended. KEY FEATURES - SIEMENS SINUMERIK 828D basic T with ShopTurn workshop programming, including 2 electronic handwheels - Automatic 4-position tool turret AK21, tool change time 2.4 s - Fixed steady rest Ø 10-200 mm and traveling steady rest Ø 20-100 mm as standard - Manual tailstock MK 5 - Automatic gearbox, 3-speed STANDARD EQUIPMENT Laedpszi Dadefx Acfsf - CNC control SIEMENS SINUMERIK 828D basic T / ShopTurn - 4-position tool turret AK21, electrically programmable - 3-jaw chuck Ø 250 mm, hard jaws - Fixed + traveling steady rest - SIEMENS X/Z servo motors - Door interlock, interlocked chuck guard, 2 halogen machine lights - Automatic coolant and lubrication system - German + English operating manual, CE declaration of conformity CONDITION - OPENLY COMMUNICATED Originally, a chip conveyor was installed (see order confirmation 2016). This is no longer present, and the machine is currently operating with a chip tray. Retrofitting a chip conveyor is possible upon request for an additional charge. Sold "as is, where is", no warranty. On-site inspection or a video call is strongly recommended, and an independent functional and accuracy assessment is available upon request. OUR SERVICE Online or on-site factory inspection at the previous owner's location · Transportation arranged upon request · Assembly, commissioning and operator training by our service technicians · direct German-speaking contact person for spare parts and support · Member of FDM, the German association for wholesale trade in machinery and tools. As this is a unique item, sale is subject to prior sale. Call us or send a brief message, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, incremental encoder Laedpfx Acogccucjfjf -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Condition: used, Year of construction: 2009, functionality: fully functional, The machine is disassembled and stored in a warehouse. Photos of the modules are available upon request. Please submit reasonable offers. We have a Kern 2600 machine for sale. Below you will find information about the envelope inserting system offered for sale: - Equipped with Mail Factory - KVS Inserting and Sealing Module - K990 Cutter (Datalogic scanner upper and lower) + K940 Merger x 1 pc - DE Direct Entry Module x 1 pc - LM Spacer Module x 1 pc - FSH Folding Module x 1 pc - BFGD Module x 2 pcs Lodpsy Eym Uefx Acfsaf - Transport Module x 1 pc - Output Bin x 4 pcs - VRO with conveyor When purchasing together with a Kern 3500 machine, an attractive package price can be arranged. Additional modules from another machine are offered in a separate listing and available upon request: - EFQR Single Sheet Feeder right x 1 pc - SIGR Continuous Forms Cutter right with K2600 Options Station x 1 pc - BFGD Module (for parts only, incomplete, without covers) x 1 pc - LM Spacer Module (functional, fully complete) x 1 pc - VRO with conveyor (functional, fully complete) x 1 pc

Condition: good (used), Year of construction: 2009, Module from Kern 2600: EFQR Single Sheet Feeder right There is one missing element for the engine installation: part no: 2032468.001 Motor flange ELMO Lodpfxey Iwq Ns Acfoaf

Condition: good (used), Year of construction: 2015, functionality: fully functional, Module from Kern 2600: SIGR Continuous Forms Cutter right with K2600 Options Station Lasdpfx Asy Iwn Ujcfjf

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Lajdpfxszbub Dj Acfef Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: used, Year of construction: 2018, functionality: fully functional, turning diameter: 1,000 mm, turning diameter over bed slide: 710 mm, turning length: 8,000 mm, Used heavy-duty lathe with extensive steady rest equipment – ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm was specifically designed for pipe machining applications. The sophisticated machine design allows the cutting edge to easily pass the open steady rests – ideal for precise machining of long, hollow workpieces. Technical Highlights: • Turning diameter over bed: 1,000 mm • Turning diameter over support: 710 mm • Center height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency converter, continuously variable Design advantages: • Machine bed cast in one piece and artificially aged – for maximum stability and stress-free operation • 5 hardened and ground guideways for maximum precision • Continuous feed control of the longitudinal axis via ball screw – no Norton or lock-box gearing • Electric-driven tailstock with hydraulic clamping • Manually adjustable cross support with trapezoidal thread spindle Lodpsv Tnttofx Acfjaf • 4-station tool carrier, manually pivoting • Triple-guided turning support – for extremely smooth running Steady rests & tube processing: • Various steady rests (stationary and follow-on) optional Available • Motorized steady rest carriers with hydraulic clamping • Spindle adjustment conveniently possible from the operator's side • Traveling steady rests can be mounted either on the left or right Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise machining of tubes. The continuously variable speed and feed control ensures high flexibility and ease of use.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Lajdpfx Acoqwqiaefef Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Ljdpfx Ashx R Dvjcfeaf Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 105 mm, turning diameter: 560 mm, turning diameter over bed slide: 360 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, DLZ 560 – Conventional Precision Lathe The DLZ 560 is a robust and versatile lathe designed for demanding use in mechanical engineering and metalworking. Max. turning diameter over bed: Ø 560 mm Max. turning diameter over cross slide: Ø 360 mm Spindle bore: Ø 105 mm Laodpsxdnd Aofx Acfsf Spindle speed range: 36 – 1600 rpm (12 steps) Centre distance: 2000 mm Motor power: 7.5 kW Machine weight: approx. 2,900 kg Thanks to its heavily ribbed Meehanite cast bed, the machine offers high stability and excellent vibration damping. Wide, hardened and ground guideways ensure long-lasting precision, even when machining heavy workpieces up to 500 kg. The comprehensive standard equipment includes, among others, Multifix toolpost, 325 mm three-jaw chuck, 400 mm faceplate, fixed and travelling steady rests, 2-axis digital readout, as well as coolant and lubrication systems, and much more. Also available with infinitely variable spindle speed! The DLZ 560 impresses with its high accuracy, user-friendly operation, and versatility – ideal for single-part and small-batch production in toolmaking and mechanical engineering. Available from the end of December. Photo similar.

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Ljdpfsy Ep Thjx Acfoaf Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: excellent (used), Connection: mains plug 230 / 12 V max. 620 g e=0.01 g min. 0.1 g d=0.001 g Lasdpjy Edaxefx Acfsf

Condition: new, plate thickness 6 mm pressure 12 t cutting range Breite x Länge 200 mm no. of strokes 15 Hub/min cutting angle 30 - 140 ° Ljdpfsll Dbujx Acfjaf total power requirement 4 kW weight of the machine ca. 1,02 t dimensions of the machine ca. 1065 x 900 x 1210 mm

Condition: used, Clinching unit TOX - Pneumatic-hydraulic TOX press Hydro-pneumatic press TOX Pressotechnik KRAFT PAKET Type CRS 03.62 No.: 207599.2 Year of manufacture: approx. 2005 Pressing force: max. 80 kN = 8 tons Stroke: 20 mm Installed height: 32 mm - Integrated clinching tool - Pneumatic valve for control - For joining by upsetting or clinching - Used to create a positive connection between 2 sheets without piercing or heating them Laododz Sqqopfx Acfsf - Mounted on a stand - With simple electrical control and foot switch Weight: 230 kg Comes from a production facility; sold without electrical control.

Condition: used, Year of construction: 1976, Forklift attachment, crane arm, load arm -Manufacturer: Meyer, crane arm load arm for forklift trucks -Load capacity: 1000 kg Ljdsttimqepfx Acfsaf -Mounting: Forklift, dimensions see photos -Dimensions: 1800/840/H980mm -Own weight: 83 kg

Condition: like new (used), Year of construction: 2015, Suction capacity without/with dust bag: 1800/1520 m³/h Spindle speed: 2800 rpm Drive motor: 400 V, 0.75 kW Lajdpfszvm I Dex Acfof

Condition: good (used), Year of construction: 2005, operating hours: 5,628 h, Weidemann WL 6210 wheeled loader – year of manufacture 2005 For sale is a Weidemann WL 6210 wheeled loader in good working condition. Technical specifications: Year of manufacture: 2005 Operating hours: approx. 5,628 hours Engine power: 74.5 kW / approx. 101 hp Lsdpfx Aozt Sihscfsaf Operating weight: 6,250 kg Permissible total weight: 6,500 kg Serial number: 20857194 Includes bucket and pallet fork Articulated steering Diesel Robust and powerful wheeled loader, suitable for earthmoving, agriculture, recycling, and general loading and transport tasks. For further information, please do not hesitate to contact us. = Further information = Year of manufacture: 2005 Unladen weight: 6,250 kg CE marking: yes Technical condition: good Visual condition: good Please contact Gerrit Haverhoek for further information.

Condition: used, power: 18 kW (24.47 HP), fuel type: diesel, Year of construction: 2021, operating hours: 260 h, 260 operating hours – Crawler excavator 3,972 kg – Quick coupler system – Additional functions – 2 buckets – 18.2 kW engine – Dozer blade – = More information = Lodpey Hpkljfx Acfjaf Year of manufacture: 2021 Model year: 2021 Application: Construction Drive: Crawler Operating weight: 3,972 kg CE marking: yes Contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.