Used Kraussmaffei 500-3500 C2 for sale (17,861)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Lasdpfxox Uqade Am Noa Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Ljdpfxjwgni He Am Nsaa Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: like new (used), Year of construction: 2007, operating hours: 27,000 h, clamping force: 6,500 kN, KraussMaffei KM650-3500 C2 injection molding machine for sale. The machine is in very good condition. It has only been operated in single-shift production and used exclusively for small batch and sample production. A new hydraulic pump was recently installed (approx. 300 operating hours ago). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and guideways are undamaged and in like-new condition - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic cylinder - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Inspection under power is possible. Other accessories such as Motan dryer, chiller unit, and much more available upon request. Lsdpfx Amjyn Sc Ej Neaa The machine can be dismantled and loaded by us upon agreement. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 100 mm, injection pressure: 1,742 bar, mold height (min.): 600 mm, opening stroke: 1,150 mm, plate width: 1,440 mm, plate height: 1,490 mm, Injection molding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Slide plate opening force: 169 kN Slide plate clamping force: 144 kN Mounting plate dimensions: 1,490 mm x 1,440 mm Clear width between columns: 1,000 mm x 930 mm Mold opening stroke: 1,150 mm Minimum mold height: 600 mm Injection Unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection throughput: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Laodpfjwp Si Nox Am Nsa Electrical and Hydraulic Equipment Rated power of pump motor: 90 kW Installed heater output: 44 kW Number of cylinder heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Last inspection Krauss Maffei 24.03. New screw drive (hydraulic) 25.01. New non-return valve 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with color monitor and integrated control panel - Built-in floppy disk drive - Complete plasticizing system for thermoplastics with 100 mm screw diameter, check valve, and open nozzle

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN Ljdpfxotuncce Am Noaa weight of the machine ca.: 32 t Out of serial production *

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 504212, clamping force: 5,000 kN, screw diameter: 90 mm, clearance between the columns: 900 mm, injection pressure: 1,742 bar, installation height: 480 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ledow Dy Rwepfx Am Neaa Ejector stroke: 250 mm Ejector force: 95 kN Reverse ejector force: 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight (PS): 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current: 306 A Motor rated current: 170 A Operating voltage: 3 phases Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional charge.

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm Lasdpfehy Nnbsx Am Noa DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Year of construction: 2004, condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Lsdpfxogbpnme Am Nsaa Factory Consists : 1. Injection Moulding machine -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 - Year - 2004 - Power - 110 Kw 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Lasdpsx Uqa Defx Am Nea Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Lajdpfxox Uqawj Am Nja Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine Laodpeh Dp R Esfx Am Nja complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: open: 105 kN close: 95 kN Mounting platen (h x v): 1,060 x 1,095 mm Clear space (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry cycle: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Operating capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / option: rpm 285/349 Screw speed standard or level 1: 95 PS Screw speed option or level 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operating panel with TFT color display and 3.5-inch floppy disk drive for data backup Lajdpfxexu Uvae Am Nja Plasticizing: 1 complete thermoplastic plasticizing unit, wear-resistant design, 70 mm screw diameter with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Laodpox Ituqsfx Am Nja Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 59,000 h, clamping force: 4,200 kN, screw diameter: 60 mm, displacement volume: 769 cm³, injection pressure: 2,200 bar, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Clamping force: 4200 kN Tie bar spacing (H x V): 800 x 800 mm Platen size (H x V): 1270 x 1200 mm Min. installation height: 580 mm Max. platen distance: 1300 mm Opening stroke: 720 mm Lsdpfx Aoyv E Dajm Njaa Screw diameter: 60 mm Shot volume: 769 ccm Injection pressure: 2200 bar Equipment Display language: German Hydraulic core pull 4x Machine without handling Machine without material hopper Levelling elements Mould heating 12x Machine dimensions (LxWxH): 6.83m x 2.33m x 2.48m Total weight: 23090 kg

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Lajdpfxjx H Au Ro Am Nsa Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Condition: good (used), clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection moulding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Lsdpfjytnnzex Am Neaa Machine weight: 12,500 kg CE marking: present 2 units available Further information on request.

Condition: good (used), Year of construction: 1999, clamping force: 2,000 kN, Manufacturer: KraussMaffei Kunststofftechnik München Model: KM 200-700 C2 Machine No.: 174406 International size designation: 700 C2 / 200 Year of manufacture: 1999 Clamping force: 2000 kN Clamping force: 200 t Lajdpjytiqwsfx Am Nsa Injection unit size: 700 Machine weight: 8,800 kg Location: Freiburg

Condition: good (used), Year of construction: 2002, clamping force: 1,100 kN, Manufacturer: KraussMaffei Kunststofftechnik München Model: KM 110-390 C2 Machine No.: 1141268 Order Number: 646749/1 Year of manufacture: 2002 Clamping force: 1100 kN Clamping force: 110 t International size designation: 390 C2 / 110 Injection unit size: 390 Lasdpfoytipajx Am Nsa Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 164 A Main fuse: 200 A Motor current: 37 A Machine weight: 5800 kg Location: Freiburg

Condition: good (used), Year of construction: 1999, clamping force: 650 kN, Manufacturer: KraussMaffei Kunststofftechnik Munich Laodpfxeytik Rj Am Nsa Model: KM 65-160 C2 Clamping force: 650 kN Machine No.: 641070 Order number: 643883/1 Year of manufacture: 1999 International size designation: 160 C2 / 65 Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Main fuse: 160 A Max. motor current: 30 A Machine weight: 3,200 kg Location: Freiburg

Condition: good (used), Year of construction: 1989, Machine located in Germany Lasdpfx Ameytpcyo Nja

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine brand Krauss-Maffei and type 125-520 C2 The machine was in a company that attaches great importance to cleanliness and maintenance Year of manufacture 2004 Pneumatic valve gate 2X Hydraulic core pull 83000 production hours Clamping force of the mold: kN 1500 MC 4 control system with color monitor, integrated control panel 4 additional cylinders 1* D35 /2* D40 / 1* D45 additionally included Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale Ljdpfolkbhwjx Am Noaa PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Ljdpfjw Hthzsx Am Neaa

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Operating hours: approx. 63,000 h The machine can be inspected at any time Lodpfx Ajw D Rmism Njaa

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Lsdpfx Aoycqc Tsm Njaa Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: used, Year of construction: 1999, Krauss Maffei 80-220 C2 (1999) Clamping force: 80 t Screw diameter: 35 mm Shot weight: 115 g Distance between tie bars V: 405 mm Distance between tie bars H: 405 mm Injection pressure: 1837 bar Ledpswufwqsfx Am Noaa Type: Horizontal Drive: Hydraulic