Used Kraussmaffei Km 1300 - 8100 Mx for sale (12,548)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 52,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 95 mm, Clamping force 13000 kN Mould opening force, max. 910 kN Travel force movable platen opening 217 kN Travel force movable platen closing 153 kN Size of mould platens (h x v) 2210 x 1910 mm Distance between tie bars (h x v) 1570 x 1270 mm Mould opening stroke 2350 mm Mould height min/max 700/1400 mm Max. daylight 3050 mm Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 2173 bar Stroke volume 3721 ccm Shot weight (PS) 2642 gr. Injection rate 659 ccm/s Screw speed 150 1/min Plasticising rate max. 105 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 13,00 x 4,00 x 3,00 m Total machine weight 64000 kg Max. mould weight 29000 kg Chsdez Hngyepfx Ahmec Accessories: - Anti vibration pads - Sepro Robot 4050 S3 Trans Additional Options: - 3 x core pulls on movable plate - 3 x core pulls on fix plate - 2 x air valve - 6 x hydr. shot off nozzles - 16 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit Cedjzinanjpfx Ahmjhc • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Chodpfxszqdibj Ahmsc Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Chodpfxezvm A Is Ahmoc Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Cedpfx Aoy Hqwyshmshc Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Chjdpfx Ahjyrrwkjmjc Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, KRAUSS MAFFEI 1000 INJECTION MOLDING MACHINE Brand: Krauss Maffei Model: KM 1000 - 8100 MX Clamping force: 1000 tons Plasticizing capacity: 144 g/s Injection volume: 5453 cm3 Screw diameter: 115 mm Horizontal column spacing: 1400 mm Vertical column spacing: 1150 mm Platen width: 1960 mm Csdszg Uzyjpfx Ahmohc Platen height: 1710 mm Minimum/maximum thickness: 500/1200 mm Year: 2006

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Codpfx Aoz Dux Rjhmjhc Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Chedpsztpkpofx Ahmec Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Clamping force: 8,500 kN / 850 t Control system: MC5 Closing system: hydraulic-mechanical, twin-platen Robot: KraussMaffei LRX 500 Robot Z-axis: 4,000 mm Robot X-axis: 1,500 mm Robot Y-axis: 1,250 / 1,250 mm Closing unit: twin-platen hydraulic-mechanical system with 4 pressure pads and 4 locking units on the moving platen Mold closing force: 8,500 kN Mold opening force: 560 kN Dimensions of mounting platens (H × V): 1,600 × 1,600 mm Distance between columns (H × V): 1,140 × 1,140 mm Mold opening stroke: 1,600 mm Minimum mold height: 500 mm Maximum mold height: 1,100 mm Maximum clearance / opening width: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: 12000 Injection unit adjustment: PV Plasticizing system: complete system for processing thermoplastics Screw diameter: 135 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Chjdpfx Ajz Eh U Ujhmjc Nozzle orifice diameter: 9 mm Maximum injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection weight for PS: 6,098 g Injection rate: 1,414 cm³/s Rated power of pump motor: 132 kW Dry cycle time according to EUROMAP 6: 965 1/h Oil tank capacity: 2,440 l MC5 control system: color monitor, integrated control panel, USB port/data storage Net weight including control cabinet: approx. 49 t Machine dimensions / footprint (L × W × H): 11.72 × 2.92 × 2.71 m Additional equipment: KraussMaffei LRX 500 linear robot

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Cjdpfx Ahezvm T Tomohc Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Chodpfsx Hz I Nsx Ahmsc Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Csdpfx Aozvm E Ashmshc Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: like new (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, Krauss-Maffei KM 1150/4300 MX Horizontal injection moulding machine by Krauss-Maffei with 1,150 tonnes of clamping force. Year of manufacture: 2014. Operating hours: 35,640. MC6 control system. Extras: ABB 6-axis robot, 24 hot runner zones, 10 pneumatic + 10 hydraulic sequential controllers. Can be shown in production. Technical Details CLAMPING FORCE: 11,500 kN OPERATING HOURS: 35,600 Chedey Efkropfx Ahmsc SCREW DIAMETER: 90 mm INJECTION PRESSURE: 1,839 BAR INJECTION VOLUME: 2,290 cm³ INJECTION WEIGHT: 2,084 g OPENING STROKE: 2,000 mm PLATEN DIMENSIONS: 2,210 x 1,910 mm MINIMUM MOULD THICKNESS: 600/1200 mm YEAR OF MANUFACTURE: 2014

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Codpfx Asyh I Emehmjhc Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 Chjdpfx Aetrya Rehmoc - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Chodpfxszrgfhj Ahmjc Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 120 mm, injection pressure: 1,758 bar, injection weight: 6,175 g, opening stroke: 2,000 mm, KraussMaffei KM 1100–12000 MX including WITTMANN robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Tool height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Cjdpfsy T Hd Nex Ahmjhc Screw speed (Standard / Option): 103 / 145 rpm Injection rate (Standard): 1,118 cm³/s Injection rate (Accumulator): 1,696 cm³/s MACHINE DETAILS Electro-hydraulic system Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating circuits on the cylinder: 7 Cycle time (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel and three USB ports

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Cedpoymn Rvjfx Ahmehc Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2000, Krauss Maffei KM 800-8100 injection molding machine Year of manufacture: 2000 Serial number: 8I181A5 Control system: Krauss Maffei MC4 Technical data Clamping force: 8000 kN (800 t) Screw diameter: 95 mm L/D ratio: 23:1 Injection volume: 3721 cm³ Injection weight (PS): 3386 g Injection pressure: 2172 bar Maximum cylinder temperature: 375°C Screw speed: 126 rpm Injection rate: 659 cm³/s Plasticizing rate: 112 g/s Chjdpfx Ahszrw Adjmoc Nozzle closing force: 166 kN Clamping unit Dimensions of mounting plates: 1600 × 1530 mm Distance between columns: 1120 × 1000 mm Opening stroke: 1400 mm Minimum mold height: 600 mm Maximum mold height: 1100 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 59 kN (front / rear) Electro-hydraulic system Pump motor power: 110 kW Installed heater power: 61 kW Number of heating zones: 7 Number of dry cycles (EUROMAP): 560 cycles/h Oil tank capacity: 1500 l Motor current: 235 A Total current consumption: 455 A Main fuse: 2 × 250 A Equipment Control system: Krauss Maffei MC4 Robot interface: Euromap 12 Hydraulic cores: 4 pcs. Pneumatic valves: 4 pcs. Robot preparation: Yes Central lubrication system: Yes Oil cooling system: Yes Dimensions and weight Length: approx. 10,600 mm Width: approx. 2860 mm Height: approx. 2410 mm Weight: approx. 47,000 kg

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Chodpfx Ajwxdrbehmjc Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Cjdpfxezkanye Ahmshc Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8500 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1600 mm Distance between tie bars (h x v) 1140 x 1140 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Chsdpfeyb Sx Hjx Ahmec Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 43000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 4 x hydr. core pulls - 12 x hydr. sequentional valves - 2 x 12 folds water flow regulator - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 135 mm, clearance between the columns: 1,140 mm, ejector stroke: 300 mm, TECHNICAL DETAILS Mold closing force: 8,500 kN Cedpjy T Hmkjfx Ahmjhc Mold opening force: 560 kN Dimensions of the clamping plate (h x w): 1,600 mm x 1,600 mm Distance between columns (h x w): 1,140 mm x 1,140 mm Mold opening distance: 1,600 mm Mold height (min-max.): 500 mm - 1,100 mm Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection weight per shot: 6,098 g Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic system Motor rated power of the pump: 132 kW Dry cycle time according to Euromap 6: 965 1/h Oil tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle opening: 9 mm Dimensions & Weight Installation space dimensions (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control unit: 49 t EQUIPMENT Krauss Maffei robot LRX 500 MC 5 control system with color monitor Integrated control panel and USB data storage Complete plasticizing unit for thermoplastics Check valve

Condition: reconditioned (used), Year of construction: 2006, operating hours: 60,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture 2006. Screw diameter 85mm. MC5 control. Approximately 60,000 working hours. The machine is delivered REFURBISHED by our team of technical experts and in optimal working condition. We can offer commissioning services at our customer's premises, ensuring full functionality upon installation completion. Technical Details Csdpfxow Avafs Ahmohc Screw diameter: 85mm Injection pressure: 2242 Bar Injection volume: 2695 cm3 Injection weight: 2452g (PS) Year of manufacture: 2006 Working hours: 60,000 Minimum mould thickness: 550/1100mm (Min/Max) Maximum platen distance: 2100mm Opening stroke: 1600mm Tie bar distance: 1120x1000mm Platen dimensions: 1600x1530mm Clamping force: 8000 kN