Used Krones Variojet 562/Bloc for sale (1,231)

Condition: ready for operation (used), A complete Krones bottle cleaning and filling line is available. Throughput: 8000bottles/h, carousel pitch: 161mm, carousel diameter: 1800mm, filling valves: 50. This is a complete rinser and filler monoblock for glass and plastic bottles. Documentation available. An on-site inspection is possible. Iedezmh Slepfx Ahzoaw

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data Isdpfx Ahsyluwtezjaw - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures - production capacity: 32,000 bph at 1.0 L - direction of rotation: clockwise - availability: beginning of October 2026

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 Isdpfxjxhf Hio Ahzjaw - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Iaedpjn S A R Sofx Ahzew

Condition: used, Year of construction: 1997, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsBottle materials: PETNominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bphMachine rotation: ClockwiseOverall dimensions: L 3.8 m, W 3.2 m, H 2.65 mApprox. weight: 7,500 kgReference: M304Module DetailsFiller carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup.Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers.Advanced Automation & Control SystemsPLC platform: Siemens S7 for process control, diagnostics and integration.Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line.Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention.Production Line Integration CapabilitiesLine compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line.Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included).Downstream equipment: Compatible with conveyors, labellers, packers and palletizers.Handling system: PET neck handling for stable transfer between filler and capper.Machine Condition & Maintenance HistoryStatus: In storage; filler dismantled and stored.Operating readiness: Operating after scheduled service/maintenance.Power: Not connected.Operating hours: Not set.Typical availability: Unit can be prepared for dispatch after service with a standard lead time.Operational Performance & VersatilityProcess benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats.Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits.Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages.Installati... Iedpfx Ahsyhcgbezjaw

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotary... Iajdpfoy Szb Tjx Ahzow

Condition: used, Year of construction: 2004, machine/vehicle number: M323, Used combi KRONES contiform S8 + mecafill triblockTechnical Specifications & Performance DataThis rotary blow-fill-cap monoblock is engineered for high-quality PET bottle handling and beverage production. Manufactured by Krones, it integrates a Contiform S8 stretch blow molding section with a Mecafill filling block and a Krones capping unit, delivering efficient performance for still and sparkling water. Designed for industrial packaging environments and suitable for integration into a used bottling line or as a second hand standalone system, it combines precision, reliability, and reduced footprint.Manufacturer: KronesModel configuration: Contiform S8 + Mecafill (integrated tri-bloc)Year of manufacture: 2004Maximum speed: up to 12,800 bottles per hourContainer material: PETCurrent bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum bottle height: 350 mmRotation/direction of work: ClockwiseNeck type: AlaskaBlow molder molds: 8 cavitiesGrippers (in/out): 8Mandrels: 220Blowing pressure: 40 barElectrical supply: 400 V, 3 PH, 50 HzControl systems: Siemens PLC with Krones HMIAdvanced Automation & Control SystemsThe monoblock features an integrated automation suite designed to simplify operation and reduce changeover times. The Siemens PLC platform coordinates the stretch blow molding, filling, and capping phases, while the Krones HMI provides intuitive process visualization, recipe selection for multiple bottle formats, and operator diagnostics. Rotary motion ensures smooth container transfer between stations, minimizing scuffs and misalignment. Electronic setpoints for speed and temperature profiles improve consistency across shifts and batches. Safety interlocks and guarded access points support reliable operation during beverage production.Production Line Integration CapabilitiesEngineered for seamless integration, this monoblock can operate inline with upstream preform feeding and downstream conveyors, labelers, inspectors, and secondary packaging machinery. It fits modern beverage production and industrial packaging layouts, supporting flexible format changes across 0.5L, 1.0L, and 1.5L PET bottles. The integrated design reduces footprint and transfer points compared to separate machines, enhancing efficiency in both new installations and upgrades of a used bottling line.Machine Condition & Maintenance HistoryThe machine is refurbished and guaranteed, ready for operation with compatible spare parts available. It is supplied in excellent working condition, tested, and prepared for immediate deployment. A 6-month warranty underscores its reliability and provides added assurance for second hand equipment buyers.Operational Performance & VersatilityThis tri-bloc configuration is optimized for water bottling, including both still and sparkling products. The blow molding section with 8 molds delivers stable out... Iajdpfx Ahoyz R H Dezew

Condition: used, Year of construction: 2002, machine/vehicle number: M316, Used KRONES filling triblock for sparkling water 25000 BPH - year 2002Technical Specifications & Performance DataThis electronic filling monoblock integrates rinsing, isobaric filling, and capping in a compact rotary platform engineered by Krones. Optimized for PET bottles and carbonated water applications, it delivers high output with excellent process stability and hygiene. The configuration includes an 80-valve filler, 60-gripper rinser and a 15-head Zalkin capper, using neck-handling transfer for precise container control.Production speed: up to 25,000 bphCurrent bottle format: 0.5LContainer material: PETNeck handling: Yes (neck transfer)Neck finish type: AlaskaFiller valves: 80Capper heads: 15 (Zalkin)CO2 management: Yes (isobaric filling for carbonated products)Machine type: RotaryRotation direction: CounterclockwiseMachine pitch: 111 mmMax container height: 320 mmWorking height: 1200 mmManufacturer: KronesAdvanced Automation & Control SystemsThe monoblock features Krones HMI interfaces for streamlined operation and diagnostics. Dedicated panels identified as KFS-3 and KRS-1 provide clear process monitoring, real-time production counters, and guided functions such as production counter reset, error list management, and lamp tests. Operator interaction is simplified via an intuitive keypad with contextual help and status indicators across machine modules.Integrated Krones control panels with HMIReal-time production counters and status visualizationProgrammable function keys for fast operationEmergency-stop circuitry and safeguarded control stationsProduction Line Integration CapabilitiesDesigned for industrial packaging environments, this used bottling line component can operate as part of a complete beverage production layout or as a stand-alone monoblock. Neck-handling transfer ensures stable throughput across light-weight PET formats, while rotary architecture supports quick changeovers between compatible sizes.Inline integration with upstream/downstream conveyorsSuitable for PET bottle handling with neck transferFormat flexibility around 0.5L, with potential for adjacent sizes depending on toolingIdeal for water and carbonated water within beverage productionMachine Condition & Maintenance HistoryThe monoblock was disconnected from regular production approximately three months ago with no issues reported. It is in excellent working order and available for immediate shipment.Operational status: ready for operationTime since last production: ~3 monthsCondition: excellent; fully functional at time of disconnectionOperational Performance & VersatilityEngineered for carbonated water, the isobaric filler with CO2 management ensures accurate fill levels a... Iaedpoyr Hvuefx Ahzow

Condition: ready for operation (used), Year of construction: 1987, A Krones rotary labelling machine with neck band is available. Labelling method: cold glue, containers: wine bottles/sparkling wine bottles, max. labelling capacity: 7000bottles/h, machine dimensions X/Y/Z: approx. 1650mm/1250mm/1700mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Iaodpfx Aozmh Srshzsw

Condition: ready for operation (used), Year of construction: 1995, A fully automatic Krones layer depalletizer is available. Pallet format X/Y: 1200mm/1100mm, max. pallet height: 2110mm, pallet travel: longitudinal, max. depalletizing capacity: 8000containers/h, container volume formats: 200ml/375ml/750ml/1000ml, container diameter range: 55.5mm-89.5mm, container height range: 205.5mm-310mm, container conveying height: 3290mm, pallet conveying height: 550mm. Machine dimensions X/Y/Z: approx. 6300mm/2200mm/3350mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Iaodpfx Ahezl U Nuozew

Condition: used, Year of construction: 2012, machine/vehicle number: LC647, Used Sidel filling line for water, PET 36000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-efficiency PET still-water production system engineered for industrial packaging and beverage production. Designed around a 0.55L format and the 30/25 PCO1881 neck finish, it delivers a nominal output of 36,000 bottles per hour. Major equipment includes a Sidel SBO20 blow molder with 20 cavities, a Sidel EUROPA WM filling monoblock configured with 60 filling valves and 15 capping heads, and a Krones Contiroll HS labeling machine for continuous high-speed labeling. The line is a robust second hand solution for producers aiming to scale PET water operations with proven reliability.Production speed: 36,000 bph (design format 0.55L)Primary format: 0.55L (550 ml) bottlesNeck finish: 30/25 PCO1881Containers: PET bottlesBlow molder: Sidel SBO20, 20 cavitiesFilling monoblock: Sidel EUROPA WM, 60 valves / 15 capping headsLabeler: Krones Contiroll HSCap feeding: Sidel Aidlin 24 cap feederLine year: 2012 (core filler unit 2011)Advanced Automation & Control SystemsThe line integrates synchronized control between the blow molder, filling monoblock, cap feeding, and labeling systems to maintain stable, high-speed operation. Central operator interfaces coordinate start/stop sequences, speed ramps, and fault diagnostics. Safety interlocks, guarding, and emergency stops protect operators while ensuring consistent uptime. Quick adjustments and recipe-based parameters support repeatable setups for the 0.55L format, minimizing changeover downtime and optimizing overall equipment effectiveness.Production Line Integration CapabilitiesEngineered for inline operation, this PET bottling equipment connects via conveyor systems with accumulation and transfer sections for smooth product flow. The configuration supports still water applications with the 30/25 PCO1881 neck finish, enabling efficient handling from preform feeding and blow molding through filling, capping, and wrap-around labeling. The system architecture allows integration with upstream and downstream equipment such as inspection, case packing, and palletizing to form a complete beverage production and industrial packaging solution.Machine Condition & Maintenance HistoryThe line is still in production, indicating maintained operability and continuous performance under real operating conditions. Components have been kept in working order to support ongoing output. This second hand PET water line benefits from active status, helping prospective users evaluate performance and plan for a smooth transition to new production requirements.Operational Performance & VersatilityOptimized for still water, the Sidel EUROPA WM monoblock combines precise filling with consistent capping torque control across 15 heads. The Sidel SBO20 blow molder provides reliable preform heating and stretch-blow performance across 20 cavities for stable bottle quality at high speeds. The Krones Contiroll HS delivers continuous, high-speed labeling accuracy suitable for demanding PET beverag... Iedpfx Ahszc Hqmezjaw

Condition: used, Year of construction: 2004, OVERVIEW This Krones KES-2-4-312/25-110 bottle washing machine is designed for the industrial washing of returnable glass bottles in beverage production lines. The machine is equipped with 25 bottles per row and has a rated capacity of up to approx. 28,000 bottles per hour. The machine can process bottle formats from 300 ml up to 1,000 ml, making it suitable for breweries, mineral water producers, soft drink producers and other returnable bottle operations. The washing machine is mainly built in stainless steel, with an insulated stainless steel caustic bath and steam heating system. The machine will be delivered completely reconditioned. The reconditioning scope includes the bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel. A test run is also included. The machine is offered with Siemens S7 PLC control and is available as a reconditioned machine at a special price. TECHNICAL DATA - Manufacturer: Krones - Type: KES-2-4-312/25-110 - Machine Type: Bottle washing machine - Year of Manufacture: 2004  - Capacity: approx. 28,000 bottles/hour  - Bottle Rows: 25 bottles per row - Bottle Formats: approx. 300 ml up to 1,000 ml - Control System: Siemens S7 PLC - Heating System: Steam heating - Construction: Mainly stainless steel, insulated stainless steel caustic bath - Bottle Cell Pitch: 110 mm - Machine Cell Material: Polypropylene - Bottles per Carrier: 25 pcs Isdpfx Asy Ul N Hehzeaw - Total Bottle Carriers: 274 pcs - Minimum Control Range: approx. 12,000 bottles/hour - Maximum Control Range: approx. 35,000 bottles/hour - Electrical Supply: 400 / 230 V, 3-phase, 50 Hz - Control Voltage: 24 V DC - Empty Weight: approx. 45,000 kg - Operating Weight: approx. 87,000 kg - Machine Length: approx. 11,766 mm - Machine Width without Attachments: approx. 3,136 mm - Machine Height without Floor Clearance: approx. 3,200 mm - Water Consumption in Operation: approx. 6.38 m³/h - Water Consumption per Bottle: approx. 0.22 l - Main Chain: approx. 4 years old, will be reconditioned - Reconditioning Scope: Bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel - Test Run incl. - Delivery Terms: EXW, unpacked

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine Iaodpfx Ahsy Tn D Dozew - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Ijdpfx Ahjy Azv Sozjaw Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Iaodpfxsy Azu Us Ahzsw Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Iaodsy Azq Nspfx Ahzsw Equipment - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) - Base inspection system - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system Iajdpfsyx I Awex Ahzjw - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of January 2025. Spare parts documentation is available.   Technical Data Manufacturer: KRONES Model: Topmatic Iajdpfx Ahsyt Iltszew Year of manufacture: 2011 Machine type: Rotary cold glue / hot glue labelling machine Bottle plates: 36 Capacity: up to 33,000 bottles per hour Direction of operation: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Operating hours: approx. 44,350 h (as of January 2025) Labelling stations: - 2 labelling aggregates - 1 × Neck and front label station - 1 × Back label station (disengageable)   Glue system: - 2 glue pumps - Hot glue for neck label (tamper-evident / closure sealing) - Cold glue for front and back labels - 1 spare hot glue unit included Dimensions: - Depth: 4,300 mm - Width: 3,300 mm   Electrical supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and stored  

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Isdpfeytvyfsx Ahzoaw Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Year of construction: 1998, Overview This Krones - Linapac F-T-1800 automatic bottle packer was manufactured in 1998 and was previously installed in a returnable glass bottling line. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filler and inspection systems. The LINAPAC packer series is widely used in high-capacity beverage production lines due to its robust design and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly used in the beer and beverage industry. The machine was originally operated in a high-performance production environment and is suitable for integration into returnable glass bottling systems with similar capacity ranges. Technical Data Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic insertion of filled bottles into beverage crates Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm Ijdeytq Tajpfx Ahzsaw - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: Iaedjytqzwjpfx Ahzsw - Screw capper – 11 heads - Crown cork capper – 11 heads Closure handling: - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: used, Year of construction: 1998, Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Iajdpfxjytpc Hs Ahzsw Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 1998 Designed line capacity: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle Formats - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Compliance: CE conformity available Availability: On request

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data - Capacity: Not provided - Formats: - 0.75 L Gourmet bottle - 0.25 L Gourmet bottle - 0.25 L Vichy bottle Iasdpfx Aheythznjzow - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems: - Base inspection (camera) - Sealing surface inspection - Thread inspection (conical optics) - Mouth / finish inspection - Sidewall inspection with LED illumination - Detection of transparent films on bottle base and sidewall - Scuffing detection via sidewall camera - Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit - Transport height: approx. 1,050 mm - Direction of operation: Left machine

Condition: used, Year of construction: 2011, Overview This self-adhesive labelling machine was manufactured in 2011 by the German company KRONES. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. We dismantled it properly and store it in our warehouse.    Technical data - Labelling method: Self-adhesive - Capacity: Up to 42,000 bottles/hour - Number of Autocol stations: 6 - Bottle formats: Iaedpjytcyfsfx Ahzow - 0,25 l Heineken - 0,33 l Heineken Food - 0,65 l Heineken - 0,33 l Desperados - 0,65 l Desperados

Condition: used, Year of construction: 2004, Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  - Capacity: - Max. 13,600 bph - Formats: - 0.50 L - 1.00 L - 1.50 L - Neck finish: - PCO 1881 - Alaska - Number of cavities: - 8 moulds - Operating hours: - Approx. 35,000 h Scope of Delivery  - KRONES CONTIFORM S8 stretch blow moulding machine Iedpfx Ahsylacuezoaw - Preform hopper and feeder - Chiller - 6 sets of moulds - Spare parts