Used Kugel Mueller Flaring Cup Wheel Grinding Machine for sale (80,440)

Condition: used, Year of construction: 1968, workpiece length 200 mm work piece width 110 mm workpiece height 135 mm dia. of cup wheel 125 mm magnetic clamping plate 200 x 100 mm spindle throat 75 mm spindle speed: 2.800 U/min. voltage 380 V total power requirement 0,8 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,65 x 0,65 x 1,80 m Klodpfewz Rtdsx Afder - Serial-No.: 5991 - with magnetic plate - hydr. UP / DOWN - Fine feed via rotary wheel - Diamond cup wheel - Coolant device

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Ksdpfx Afju Ngrqedelr Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm Kodpfx Ajyv Iqvefdelr 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, workpiece length / mm work piece width / mm Ksdpfeyk Imrex Afdelr workpiece height / mm FLAT GRINDING MACHINE UMA 19

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm Kedjcxxlrepfx Afdjlr workpiece height:210 mm spindle speed max.:2800 U/min distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Kledpfx Asubbrtofdjr Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money!

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. Kledpfxjha Eh Hj Afdor While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money.

Condition: good (used), – Magnetic plate 250 x 150 mm – 380V Kljdpfx Afey Abzzjdsr

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Grinding wheel dressing machine for dressing grinding wheels up to a diameter of 450 mm Easy to operate, robust, and precise Our grinding wheel dressing machine offers an unbeatable combination of ease of use and exceptional stability. The solid granite base ensures maximum precision and durability, while the user-friendly operation maximizes efficiency in your production. Kljdpfxsy Anyko Afdsr While you continue production on your tool grinding machine, our dressing machine saves you time – and therefore reduces costs.

Condition: good (used), functionality: fully functional, total height: 1,600 mm, total width: 700 mm, total length: 1,000 mm, grinding length: 250 mm, grinding width: 150 mm, grinding spindle speed: 3,150 rpm, disc diameter: 200 mm, Grinding stone diameter: 200 mm Clampingtable: 250 x 150 mm Diameter magnetictable: 120 mm Kljdpfx Afsyg E Urodjr Spindle speeds: 11 - 3.150 Rpm Country of origin: Italy Machine LxWxH: 1.000 x 700 x 1.600 mm Machine weight: 250 kg

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Klsdpfx Afexq R Hasdjr subject to prior sale!

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Klodjxq Hkuepfx Afdsr Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Kedpfx Afjxuv Udsdolr Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Kledpfevnriuex Afdsr Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity

Condition: new, Year of construction: 2023, functionality: fully functional, New DELTA surface grinding machine type LB300 Specifications: Max. grinding size: 330x140mm Max. spindle speed: 2840 rpm Parallelism: 3 µm/100 mm Flatness: 3 µm/100 mm Machine weight: 400 kg Motor power: 2.2 kW Year of manufacture: 09-2023 Machine equipped with: Magnetic chuck Kjdpfeyi Ui Dsx Afdelr New grinding wheel Lubrication system

Condition: ready for operation (used), G & N Kugelmüller MPS 1 / Cup Grinding Machine - Spindle speed: 3,150 rpm - Magnetic chuck: 200x100 mm - Grinding height above magnet: 130 mm - Side-mounted wheel dressing device - Fine adjustment - Coolant system through the grinding spindle - Drive motor: 0.6 kW Kljdpoypivxefx Afdsr - Machine enclosure - Documentation Dimensions: LxWxH 0.8x0.7x1.8 meters / Weight 180 kg Errors and omissions excepted.

Condition: excellent (used), Cup grinding machine Swivel arm grinding machine Klsdpfsui S R Dex Afdsr Make Lomefa Type Unicum 8" YEAR OF MANUFACTURE 1980 grinding wheel diameter 200 mm Motor 380 Volt 1,84 kw Separate coolant tank in the machine base Transport dimension: L.850 mm W.800 mm H.1650 mm Weight 350 kg

Condition: used, functionality: fully functional, Cup Grinding Machine Manufacturer: Delta Type: LF-350 Grinding length: approx. 360 mm Grinding width: approx. 155 mm Max. grinding height: approx. 280 mm Magnetic clamping surface: 350 x 150 mm Drive power: approx. 3 kW Grinding spindle speed: approx. 2840 rpm Grinding wheel dimensions: approx. Ø 200 x 80 x 78 mm Z-feed: manual Grinding movement: manual Equipment: Kodsv Tqugspfx Afdjlr Magnetic table Grinding wheel Grinding wheel protection Splash guard enclosure Space required: 1200 x 1200 x 1800 mm (L x W x H) Weight: approx. 450 kg The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale. The purchased item is sold excluding any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, body, or health.

Condition: ready for operation (used), Year of construction: 1991, Technical data (approx. values): • Model: Delta LF 350 • Design: Vertical cup grinding machine • Grinding area: approx. 350 × 155 mm • Grinding height: approx. 280 mm • Grinding wheel diameter: up to 200 mm • Spindle speed: approx. 2,800 rpm • Drive power: 3 kW • Connection: 400 V / 50 Hz • Weight: approx. 450 kg Equipment: • Magnetic chuck • Coolant system / Wet grinding equipment • Splash guard hood • Manual feed • Grinding wheel & tool included / dresser device • Documentation / operating manual available Condition: • Technically flawless, immediately ready for use • Visually well-maintained, normal wear consistent with age • Machine can be demonstrated under power Kledpfx Afoykvp Ujdsr

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 91.0651.90.11D, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 800 rpm, type of input current: three-phase, grinding wheel diameter: 180 mm, overall weight: 1,000 kg, grinding spindle speed: 2,000 rpm, workpiece diameter (max.): 225 mm, We offer this Wendt OPRA 200V tool grinding machine in like-new condition, year of manufacture 2023. Ksdpfeyh Rkljx Afdolr Manufacturer: Wendt Model: OPRA 200V Year of manufacture: 2023 Condition: as new Category ID: 1166 Type ID: 307 Machine type: tool grinding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm Kedpfevnmnrsx Afdslr total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: good (used), G&N Kugelmüller MPS 1 Cup Grinding Machine from University Kodpfx Afjyc Hmnedolr - Spindle speed 3150 rpm - Grinding height above magnet approx. 130 mm - Magnetic chuck 200x100 mm - Side-mounted wheel dresser - Fine adjustment - Drive motor 0.6 kW - Machine enclosure - Documentation Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 1993, with oil filtration system Unfortunately, no further technical data is available. Kodpfoydldhex Afdjlr

Condition: used, Year of construction: 1996, Technical details: Kodpeizldxjfx Afdjlr weight of the machine ca.: 15 t

Condition: used, Year of construction: 1995, Technical details: grinding height: -- mm grinding width: 220 mm grinding wheel diameter: 762 mm total power requirement: 90 kW weight of the machine ca.: 13 t grinding spindle 1 drive:: 37 kW grinding spindle 2 drive:: 37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors Klodpfx Afowi Nh Njdsr *