Used Liv Ork 30/200/65 Em for sale (50,740)

Condition: used, Year of construction: 1996, sheet width 360 mm coil weight 550 kg coil internal dia. 420 - 520 mm coil external diameter 1600 mm total power requirement 2,2 kW Itedpfxeymp Rde Anwoh weight of the machine ca. 2 t

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 Iedsxbhtlepfx Anweth IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Impeller: Cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Itjdpfx Asxbhtronweh Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Isdpjx Erpnefx Anwoth

Condition: repair required (used), Year of construction: 2002, operating hours: 11,900 h, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: electric, mast type: simplex, construction height: 3,000 mm, Year of construction: 2002 Field of application: Internal logistics Iedpezd Dyasfx Anwsth

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Isdpfey Nrynjx Anwjth

Condition: excellent (used), Bezel (28371) Center height 200mm diameter 65mm weight 9 kg Iodpfx Anelrp Nqjwoth more data, see picture

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized Manufacturer: SLP leg A: approx. 200 x 140 mm Itsdpfsipuggex Anwjh leg B: approx. 200 x 38 mm opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/pc.: 0.930 kg

Condition: good (used), Approx. 30lfm shelf rack system Schaefer R3000 Manufacturer: Schaefer R3000 as good as new, see pictures. upright, galvanized, 2,5 m height, depth 60 cm Shelves, galvanized, 200 kg load/ shelf, shelf width approx.100 cm Negotiable price: € 3.290,00 net ex stock Offer consists of: 31 pcs. uprights or frames, height 2,5 m, galvanized 90 pcs. Shelves, 200 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening 3 levels per field (of course more levels are possible against surcharge) Other combinations possible. Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly more than 3000 running meters of pallet racks Itodoccxuiepfx Anwsh from numerous manufacturers in stock. Transport and assembly on request. Further information on request. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges. To get to our site, please click on our logo! broom-clean business evacuations company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending radius (min.): 90 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Isdpfxsy Dpgzs Anwjth Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Ijdjx Eu Uyepfx Anwsth

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection Iedpfjhvz D Hex Anweth our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: Itedpehwduxofx Anwoh The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.400 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 6,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately Iodpfohwdu Hjx Anwoth depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Year of construction: 1999, condition: good (used), Product: BMF Year of production: 1999 Metal chain width: 200 mm Long-distance guide lanes: approx. 300 mm Chip outlet length 900/1250 mm Insertion length: approx. 1000 mm Insertion height 260 mm Insertion width 350 mm Total length: 3600 mm Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min. Itsdehq Hz Hopfx Anwjh Engine power: 0, 25 kW Mains connection was 400 volts, 50 Hz Enclosure size: H x W x D; 8700 x 900 x 1500 mm Weight 400 kg

Year of construction: 2013, condition: ready for operation (used), total width: 6,000 mm, total height: 8,500 mm, product length (max.): 5,300 mm, table load: 3,000 kg, DimaSimma EMS-30 TWIN was manufactured in 2013. It features a maximum lifting weight of 3,350 kg and a vertical movement speed ranging from 3 to 10 m/min. The system includes two towers with racks for 80 containers, each with a maximum load capacity of 3,000 kg. If you are looking to get high-quality material handling capabilities, consider the DimaSimma EMS-30 TWIN machine we have for sale. Contact us for further details. • Performance • Max. lifting weight: 3 350 kg Itodpfx Asy T N Eisnweh • Vertical movement speed: 3–10 m/min • Horizontal movement speed: 3–10 m/min • Electrical supply: 220–400 V / 3F / 50 Hz • Max. power consumption: 30 kW • Containers • Quantity: 80 pieces (on 2 towers) • Usable dimensions: 4 250 × 720 × 250 mm • Design: closed sides, open bottom • Construction • 2 towers with racks (total of 80 containers) • A lifting unit (elevating unit) moves along the vertical axis in each tower • Lifting gearbox located at the bottom • Material movement • Vertical movement: up and down • Horizontal movement: container extraction/insertion • Work stations • 1 loading and 1 unloading station, opposite each other Additional equipment • WMS software: Elephant Manager (product identification, inventory and minimum stock management, order-based issue control, material entry date tracking) • PC control: 2 computers for operation

Year of construction: 1995, condition: excellent (used), Manual length adjustment via handwheel with digital display. Itsdpfey Tyzzjx Anwoh Maximum feed length: 3,000 mm. Pneumatic parking brake.

Condition: used, Year of construction: 1999, material width 360 mm Ijdpovut R Hefx Anweth coil weight 3,0 t coil internal diameter 380 - 520 mm coil external diameter 1500 mm weight 1,4 t dimensions (WxDxH) 1,8 x 1,8 x 1,7 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate

Condition: new, sheet width 3100 mm plate thickness 6 mm Ijdpfjyv Nf Iex Anwoth pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm

Condition: used, Face drivers Make WMW Iodocu Ngkepfx Anweth Clamping ranges 30 - 200 mm pmax 3500 kn Short taper size 5

Condition: good (used), Year of construction: 1989, machine/vehicle number: 51756, Offer 25200 Technical data: - Press force: 200 t - Working width: 3100 mm - Distance between uprights: 2600 mm - Table width: 180 mm - Throat depth: 300 mm - Installation height: 450 mm - Approach speed: 80 mm/sec - Working speed: 9 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustment range of fixed stops: 120 mm - Drive: 400 V / 18.7 kW - Space requirement approx.: W 3300 x H 2950 x D 1900 mm - Weight approx.: 10,500 kg Isdpswvipgsfx Anwjth - Equipped with: - Adjustment of press depth and pressing force - Motorized back gauge with handwheel for fine adjustment - 4-way universal die, pointed tool - Two-hand control panel, foot switch,

Condition: good (used), Year of construction: 1992, machine/vehicle number: 20106, Offer 25100 Itjdpewbgizsfx Anwsh Technical specifications: - Pressure capacity 200 t - Working width 3050 mm - Clearance between columns 2550 mm - Table width 180 mm - Throat depth 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Ram stroke 150 mm - Adjustment range of fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - With: - Backgauge with 2 stop fingers - Deer foot tool - 4-way universal die - Two-hand control panel, foot switch

Condition: used, Year of construction: 2019, operating hours: 4,300 h, Equipment: all wheel drive, * Wacker Neuson EW 65 wheeled excavator * Year of manufacture: 2019 * 4300 operating hours * 7290 kg * 45.5 kW Perkins engine * 30 km/h * Hydraulic Powertilt quick coupler * 3 buckets: 125, 60, 40 cm * All hydraulic lines * Air conditioning Iedpfoyq A H Tox Anwoth * Central lubrication * Camera * Particulate filter * Track width approx.: 208 cm

Condition: used, Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder Iedpfjun Dwysx Anwjth -Type: BDG 6360-2-10-30-W126-2500-65 -Quantity: 2 encoders available -Price: per piece -Dimensions: 58/86/H70 mm -Weight: 0.3kg

Condition: used, Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece Iedpfxsfgrphs Anweth -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece