Used Lm Industry Srl Kastenkipper 180° for sale (36,343)

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Djdpfoxcx Amjx Adrecn

Condition: used, Year of construction: 2013, operating hours: 20,684 h, functionality: fully functional, machine/vehicle number: Roboter: 6640-105413 / Steuerung: 6640-105413, overall weight: 1,460 kg, load capacity: 180 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 6640 M2004 manipulator (IRB 6640-180/2.55 Standard) and IRC5 M2004 controller for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. The payload is 180 kg with a reach of 2550 mm, manufactured in 2013, with 20,684 operating hours and RobotWare software version RW5.15_02.00.2005. It is equipped with a main connection cable for power and data, a power supply cable, a FlexPendant programming device, resolver offset values on the housing, and the following software options: German, World Zones, Path Recovery, Collision Detection, and Multitasking. Dcsdpfxjzal Urs Adrsn

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2019. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment • USB interface • Three-colour signal light • 1 set of soft jaws Dsdpfx Aszvv Dzodrscn • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Extra Information Strongly reduced interference contour Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP

Condition: excellent (used), Epson G10-854SR 4-Axis SCARA Industrial Robot Dodpfx Aeibx S Njdrjcn Epson SCARA G10-854SR A SCARA robot with an impressive payload of 10 kg, without compromising on speed or accuracy. High payload without compromise Thanks to their high arm stiffness, the SCARA robots in the G10 series can move heavy loads at high speed. They are fast in any application, whether in manufacturing and configuration or in handling with multiple grippers. In particular, they are the ideal choice for applications such as the assembly of heavy parts, packaging and palletizing, and loading and unloading. High performance in a compact design The SCARA robots in the G10 series are among the most powerful robots in their performance class and impress with an outstanding range of motion while maximizing space utilization. They offer cycle times as low as 0.34 seconds, even over extended periods of operation. The unique arm design with high stiffness ensures very low residual vibration, with smooth start and stop movements even at high speeds. Outstanding versatility The robots in the G10 series are the ideal solution for applications where high speed and maximum accuracy are required. For example, they are suitable for the manufacture of mechanical and electronic components, the placement of parts (including small parts), and for dispensing and feeding. * Payload of up to 10 kg without compromising on speed * Working range comparable to that of larger robot arms * Cycle times as low as 0.34 seconds, even over extended periods of operation * Epson complete solution consisting of robot, controller and software * Ideal solution for a wide range of applications, from automotive to pharmaceuticals Technical data Type: SCARA (4-axis robot) Payload: nom. 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360 ° Horizontal repeat accuracy: +/- 0.025 mm Vertical repeat accuracy: J3: +/- 0.01 mm Orientation repeat accuracy: J4: +/- 0.005 ° Max. operating range: Axis 1: +/- 152 °, Axis 2: +/- 152.5 °, Axis 3: 420 mm, Axis 4: +/- 360 ° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling Electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Ø outside: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m "One-stop shop: We would be happy to offer you a suitable bank financing option for your project." You can find more robots in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: defective spare-parts repository (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 21236, overall weight: 15,000 kg, empty load weight: 5,320 kg, Ludden&Mennekes LM 24 L – 24 m³ compactor container | Defective / for repair For sale: Ludden&Mennekes LM 24 L compactor container, manufactured in 2014, with a capacity of 24 m³. This heavy-duty compactor container is offered as a defective/repair item. The machine has damage to the compaction section and needs to be technically repaired before further use. The container itself is robustly built and may therefore be of interest to a company that can repair the machine itself, for refurbishment, or possibly as a donor/parts machine. Technical data: Brand: L&M Type: LM 24 L Year of manufacture: 2014 Machine number: 21236 Capacity: 24 m³ Power supply: 400 V / 50 Hz Motor power: 5.5 kW Nominal current: 11.3 A Maximum fuse rating: 25 A Weight: approx. 5,320 kg Dcsdpfx Adoz Eq N Uorjn Permissible total weight: 15,000 kg Heavy-duty industrial design Known defects / damage: The compactor container is explicitly offered as defective. The machine has, among other things: the breaking edge pushed up/deformed; the compaction block is bent and dented; the lids are deformed and damaged; visible signs of wear, rust, and paint damage are present. The damage is shown as accurately as possible in the photos. The machine is therefore sold in its current condition, with repair necessary before it can be put back into normal use. Due to the large capacity of 24 m³ and the heavy-duty construction, this machine may be of interest as a refurbishment project, repair item, or parts machine. Inspection is possible by appointment. For additional information on the technical condition or the existing damage, please do not hesitate to contact us. Keywords: Ludden Mennekes, Ludden + Mennekes, L&M, LM24L, LM 24 L, compactor container, 24m3, 24 m³, waste compactor, container compactor, defective compactor container, repair item, refurbishment project, waste compaction, recycling, parts machine.

Condition: used, Year of construction: 2014, functionality: fully functional, Brand: HYUNDAI-WIA Model: LM-1800 / ITSY Category: CNC Turning Center Year of manufacture: 2014 CNC Control: FANUC Series 31i – Model A Machine weight: 8,500 kg Machine Dimensions Length: 4,600 mm Width: 2,100 mm Height: 2,090 mm Working Capacity Max swing diameter over upper/lower carriage: No.1: Ø 290 mm / No.2: Ø 290 mm Max turning diameter (spindle / sub-spindle): No.1: Ø 230 mm / No.2: Ø 230 mm Max turning length: 673 mm Bar capacity (spindle / sub-spindle): Ø 76 mm Axis Travels X1 / X2 axis: No.1: 165 mm / No.2: 195 mm Y axis (upper turret): 100 mm (± 50 mm) Z1 / Z2 axis: No.1: 700 mm / No.2: 720 mm ZB axis: 668 mm C axis (spindle and sub-spindle): 360° Min. programmable angle: 0.001° Main Spindle and Sub-Spindle Spindle speed: 50 – 5,000 rpm Spindle nose: ASA A2-6 Dcedpfxjyargus Adrsn Chuck diameter: Ø 210 mm Spindle motor power (max/cont.): 22 / 11 kW Turrets Configuration: Turret 1 + Turret 2 BMT-55 Stations per turret: 12 (live tool capable) Total stations: 24 Live tool speed: 5,000 rpm Live tool power: 5.5 kW Tool dimensions: Turning: 20 x 20 mm / Boring: Ø 32 mm Rapid Traverses X1 / X2 axes: 20,000 mm/min Y axis: 7,500 mm/min Z1 / Z2 / ZB axes: 40,000 mm/min Accessories TOP AUTOMAZIONI bar feeder – Fusion model Coolant collection tank with wash pumps Chip conveyor Fixed and driven toolholders Automatic tool presetting arm with M code Manuals, electrical diagrams, and CE Declaration Overhauls Carried Out Complete overhaul of turrets 1 and 2 with replacement of seals and bearings Overhaul of X2 and Z2 axis ballscrews with bearing replacement Complete overhaul of the axis lubrication circuit and replacement of pneumatic hoses Overhaul of piece ejector pistons (Z2 unload hand) with gantry replacement Complete interior repainting Replacement of operator side glass Complete overhaul of telescopic covers on all linear axes

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions Djdsz Dvduepfx Adrscn 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: used, Epson SCARA Robot Djdpfx Aothcv Rsdrjcn G20-854S Control RC180 Robot Max payload 20kg axis 1 750 w axis 2 600 w axis 3 400 w axis 4 150 w

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Djdpfx Asztaahsdrjcn Length: 5385 Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Manufacturer - Canellitech Srl Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Dcsdpsulpu Sefx Adren Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: good (used), Year of construction: 2000, FANUC LR Mate 200i Automation Robot + R-J2+ Controller + Handheld The FANUC LR Mate 200i is a compact, six-axis robot ideal for a wide range of manufacturing and system processes. The tabletop design of the LR Mate 200 enables its use in various commercial and industrial applications while saving space. The LR Mate 200i offers maximum flexibility in a compact design. The hollow-joint construction of the LR Mate 200i encloses all cable routing to prevent snagging, and absolute serial encoders eliminate the need for calibration upon power-up. Upright or inverted mounting positions are possible without any robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i features an end-effector connection integrated into the wrist, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard package for protection against dust and liquid ingress according to IP54. It also has an integrated, internally mounted solenoid valve package. In addition, the 200i can achieve axis speeds of up to 480 degrees per second. Applications: Assembly, material transport, material removal, part transfer. Robot specifications Axes: 6 Payload: 3.00 kg H-reach: 700.00 mm Repeatability: ± 0.0400 mm Robot mass: 39.00 kg Structure: Articulated Year of manufacture: 2000 Robot movement speed J1 180 ° / s (3.14 rad / s) J2 180 ° / s (3.14 rad / s) J3 225 ° / s (3.93 rad / s) J4 400 ° / s (6.98 rad / s) J5 330 ° / s (5.76 rad / s) J6 480 ° / s (8.38 rad / s) Dodpowbqvfofx Adrscn Robot movement range J1 ± 160 ° J2 + 150 ° - 35 ° J3 + 165 ° - 150 ° J4 ± 190 ° J5 ± 120 ° J6 ± 360 ° Item condition: used You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2010, Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Dsdpsz Ia Aijfx Adrocn Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E.; dimensions according to the “Ideal 360” manual.

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn, and winter – your products must be able to withstand different temperatures during manufacturing, transport, storage, and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function, and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 liters Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep, and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep, and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used Complete factory closure, Dodpfxjh Izh Ij Adrecn large selection of storage platforms, pallet racks, shelving systems, paternosters. High-quality industrial machines, lathes, grinding machines, hand tools. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Dodpjx Dbkcsfx Adrscn Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Dcodpfxoza Dv Is Adren Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. Dcedoyzr Nmspfx Adren - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Dedpfxezy Hktj Adrocn Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. KSN drum washers are designed for many years of operation in industrial environments. Standard equipment: Grundfos pump Fully insulated construction Dcjdpezy Hd Hjfx Adrsn Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Condition: used, Year of construction: 2019, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 400 mm, saw blade diameter: 370 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 3,800 rpm, total length: 2,500 mm, total width: 2,260 mm, total height: 2,000 mm, overall weight: 6,500 kg, table height: 700 mm, Equipment: CE marking, documentation/manual, The Multilama or multi-blade circular saw, model SQUALO 420, is a technologically advanced machine that is easy to use, precise, and extremely reliable. It is an essential tool for a modern sawmill, optimizing the production of sawn timber. Dcodpfx Aezzad Nedron It is ideal for producing slats, squares, lumber, profiles, edged boards, prisms, boards, and pallet components.

Year of construction: 2004, condition: used, functionality: unexamined, Semi-automatic flocking system Manufacturer: AIGLE Macchine srl The system is used to coat various materials. It can also be used as a painting system. In this particular case, the interior parts of car glove boxes were coated. The glove boxes were hung on a conveyor belt and first sprayed manually with glue. The boxes were then sprayed with flocking material in the individual flocking booths. The spray direction changes depending on the station. After the 4 flocking booths there are 2 cleaning booths. The blown, unbonded fibers are then reintroduced into the coating process via the flock distribution system. Similarly, the unbonded fibers from the four flocking booths are returned to the process. Cabin dimensions: Width: 2100 mm Depth: 2300 mm Height: 3260 mm Lock door Width: approx. 880 mm Height: approx. 750 mm Productivity: 1000 - 1500 pieces in 8 hours depending on shape and materials Djdpfx Adev Izr Eorecn Voltage: 400 Volt 50 Hz Installed electrical power: 26 kW Electric power supply: 480 V 60 Hz Space requirement for chain belt flocking system approx. 16 x 5 m Machine dismantled and assembled in the warehouse. The machine was operational until the last day of operation.

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Dcedpfszy Euwex Adren Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Condition: like new (used), Year of construction: 2025, operating hours: 1,500 h, functionality: fully functional, pressure: 12 bar, total height: 2,896 mm, total length: 12,192 mm, total width: 2,438 mm, empty load weight: 14,000 kg, Mobile containerized steam boiler plant 2,000 kg/h • Configuration: Mobile containerized steam boiler plant with auxiliary systems for independent operation, designed for relocation between sites. • Inspection certificate: The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. The certificate covers the equipment and scope of inspection identified in the certificate. • Steam boiler: I.VAR Industry BHP-EN 2000, type PFV1422000, high-pressure, monobloc design. • Performance: Steam production 2,000 kg/h, rated boiler output 1,385 kW. • Pressure: 6–10 bar; maximum working pressure of the boiler 12 bar. • Fuel: LPG – propane–butane. • Burner: Baltur TBG 200 LX ME modulating low-NOx gas burner, output range 475–2,000 kW, with Lamtec BT320 electronic controls and LCM100 load controller. Dsdpfxoz Ix Svj Adrocn • Gas train: DUNGS R2″, including gas filter, pressure regulator, operating and safety valves, and valve tightness monitoring. • Controls and automation: Valiantec, equipment for 72-hour operation without continuous operator attendance, modulating water-level control, Gestra TDS/BAE automatic TDS blowdown, and Crotti pneumatic bottom blowdown. • Feedwater pumps: 2 × Grundfos CR3-27. • Feedwater tank / atmospheric deaerator: DGSA 1500 FS, capacity 1,500 liters, AISI304 stainless steel, with steam heating and temperature control; specified water temperature 85–95°C. • Water treatment: A water softening system is not included in the scope of supply but can be supplied and installed at the buyer’s request, subject to separate agreement. • Blowdown cooling system: 250-liter AISI304 blowdown vessel with automatic cooling control. • Pipework and fittings: thermally insulated pipework, isolation and non-return valves, and steam traps. • Flue: insulated DN450 stainless-steel flue system. • Safety equipment: water-level and pressure safety devices, two safety valves, LPG and smoke detection, alarms, emergency shutdown, automatic gas shut-off, and ventilation. • Container footprint: 12,192 × 2,438 mm – length × width. • Connections: DN80 steam outlet, DN65 gas inlet, 1″ water inlet, DN80 blowdown vessel drain.

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Dcjdpfxszd Saus Adren Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 ADR RID Tank Code: R11.7BN ISO Code 6346: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: new, functionality: fully functional, machine/vehicle number: 1.1003, Equipment: CE marking, The EVO 400 is the advanced solution to modern production challenges. Combining precision and versatility, this machine is engineered to excel in both high-volume production environments and facilities requiring frequent setup changes. The asymmetrical hob head allows for the machining of critical geometries, while the optional ring-loader for rapid part loading/unloading ensures excellent performance during unmanned operation. Its compact layout and monoblock configuration guarantee a small footprint, making it easy to move and integrate into changing plant layouts. Dodpfez Iqt Sjx Adrscn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, automatic laminated glass cutting table for glass sizes : 3710 x 2600 mm max. glass cut : 3700 mm laminated sheet thikness : 33.1 - 88.12 - 1010.4 float glass thikness : 3 - 10 mm min. squaring : 110 mm max. squaring : 2750 mm min. breaking : 60 mm min. separation : 60 mm work table height : 900 mm machine dimension : 5000 x 3500 mm Dcedpfx Adoz Nft Dsren including loading table BAVELLONI REV 372 R with integrated loading arms max. loading glass size : 3710 x 2600 mm machine dimensions : 3500 x 4250 mm total dimensions for both tables work space : 7000 x 5000 mm