Used Mütek Systemtechnik Mpp 60 for sale (21,772)

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Giodpfx Aegl Nlmshzsw Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Gjdpfxov Rpxlo Ahzoiw Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. Godpfsgfm Rysx Ahzoiw - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Gedoffh Atspfx Ahzeiw Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Gedpfxsd Su Hxe Ahzoiw Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: good (used), Clean air extraction system Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Gijdpfx Ahorb D Njzow Air flow rate 1850 m³/h, 400 V

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Giedpfxjchuvre Ahzjw Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Giodpjdwktkjfx Ahzew Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Gjdpogmfa Ajfx Ahzoiw Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, operating hours: 8 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Giedpfxjxfwde Ahzsw Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Giodpfxsd Nm Sij Ahzjw Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Gjdpfx Ahschqxxjzeiw Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: reconditioned (used), Year of construction: 2023, All wear parts are new. Only 704 operating hours. Special price for a lightly used demonstration unit. Base machine: €29,990 net. Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compaction via sliding plate. Main press cylinder. Giodpjd N Dnhjfx Ahzjw Vertical cylinder. . Level sensor: yes. . Requirements for the raw material: - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg. - The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Year of construction: 2023, condition: new, Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube holder for the briquetting press - Viewing window in the container Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must ensure protection against hydraulic oil leakage - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm. Giedpekuz Tuefx Ahzew

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, Godpfx Aozbizjhzeiw and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen Gedpfx Aeh S H T Ushzoiw *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Year of construction: 2020, operating hours: 100 h, condition: excellent (used), functionality: fully functional, overall weight: 300 kg, total length: 1,330 mm, total width: 840 mm, total height: 1,870 mm, compressed air connection: 6 bar, type of input current: AC, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C Giedpoxuqtbsfx Ahzjw - Weight approx. 300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Device for closing / sealing sheep casings and pork intestines on filling machines in sausage production Gjdpfoxq S Rtjx Ahzeiw

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Gisdpfx Aewc Afhjhzjw Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Gsdpfx Ahswlc Stszoiw The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled Gsdju Smd Espfx Ahzeiw - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 50 Watt Giedpfxey Urpys Ahzsw - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers Giodezkrnrspfx Ahzjw - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), Catalog number: 7303 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 3 pcs - Max. thickness of the workpiece: 250mm From above: - Pawls - Toothed infeed shaft, pulling - Pressure rollers - Surfacing shaft - Pressure rollers - Smooth outfeed shaft, pulling From below: - Adjustable rollers in the lower bed: 2 pcs - Motor: 7.5kW - Electric bed lifting - Lifting motor: 0.75kW - 4 feed speed settings - Feed motor: 1.5kW - Diameter of dust extraction nozzle: 140mm - Dimensions (L/W/H): 1120x1250x1680mm - Weight: 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4738 EUR, depending on the exchange rate of 4.2 EUR Giodpfxjzkg Tcj Ahzjw (Prices may change due to larger fluctuations)

Condition: good (used), Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Godpjb A Sf Esfx Ahzsiw -Weight: 2 kg