Used Magraf Fo-32 Endpaper Gluing Machine for sale (70,096)

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm -maximum thickness of book block; 50mm -power supply; 220 V -input power; 0,1 kw Pgodpfx Aefhgzasb Ijr -weight; 75kg -dimension; 60c110c132cm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Pedpfxsy Uiyvo Ab Iogr The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h Pedpfxjzv Nkbj Ab Ijgr This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: new, Year of construction: 2025, COMPLETE LINE FOR HARD COVER BOOKS including; 1. SEMIAUTOMATIC CASEMAKER MACHINE MAGRAF KO-50x70 PLUS 2. CASING-IN MACHINE MAGRAF UK-46 3.PRESSING AND JOINT FORMING MACHINE MAGRAF PK-50x40 PLUS 4.HEAD BENDING MACHINE MAGRAF KV-10 5.CORNERING MACHINE MAGRAF ZA-10 6.ENDPAPER GLUING MACHINE MAGRAF FO-32 All machines are new,produced in Croatia Pjdpfx Aedv Ea Isb Iegr For other information please contact us MAGRAF

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. Pedpfxezl Hbcj Ab Ijgr The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Year of construction: 2005, condition: used, End sheet tipping machine Pjdszvd Easpfx Ab Iogr Sigloch VAM Year: 2000 - Infeed conveyor - Cold glue: HHS C-210 (nozzle) - End sheet tipping: 2 - Straight delivery (vertical) Book back gluing machine Sigloch SB-3000/2 Year: 2005 - Base for 1st spine glue system - Cold glue spine gluing - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine gluing - Premelter: Kolbus LH 370 - Back lining station - Conveyor (vertical) Nipping machine Sigloch DNH Year: 2005 - 2 pressing stations

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Pgjdpfx Aozuzp Tjb Ijr Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Pjdpfx Aex Upgcob Ijgr

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Psdpsw Na Hbofx Ab Isgr

Condition: new, functionality: fully functional, Practical – ready for immediate use without prior training. The perfect design ensures that the advantages of the KUPER adhesive thread are fully utilized. The device's practical design enables immediate use without lengthy training. After an approximately 5-minute preheating period using the temperature control unit (available for separate order), the KHL 1 is constantly ready for use. Podpfjxdxlksx Ab Iegr Even light pressure is sufficient to apply the adhesive thread intensively to the veneer sheet. Smooth operation due to maintenance-free operation. Advantages at a glance: - Only approximately 5 minutes heating time - Precise, straight-line bonding - Clean separation of the thread - Maintenance-free Item No. 0132772

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. Pjdpfsxdxbfex Ab Ijgr A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Item no. 0121383

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Pgodoxdxk Hjpfx Ab Ijr Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Standard accessories 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Pgedpoxd Sldofx Ab Ijr

Condition: used, Year of construction: 2004, machine/vehicle number: 20041227, type of input current: three-phase, total width: 2,500 mm, total length: 12 mm, total height: 1,700 mm, input voltage: 380 V, compressed air connection: 6 bar, overall weight: 5,000 kg, We are offering this used Stock Maschinenbau SFAM 2020 edge banding machine, manufactured in 2004. The associated press belt was manufactured in 2010, and the Meler hot melt glue applicator was manufactured in 2022. The working width for hot and cold glue is approximately 2100 mm! Type: SFAM 2020 Machine No.: 20041227 Pgsdpozr N Hujfx Ab Ior If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Pedpszkh S Hsfx Ab Ijgr Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Pgodpfx Ajxgqmxeb Ier Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Year of construction: 2011, Stand-off distance: 920 mm Feed rate: 15 m/min Pgsdpfezqyx Sjx Ab Ijr

Condition: used, Universelle Faltschachtelklebemaschine / Universal Folder Gluing machine Faltschachtelklebemaschine /  Folder Gluing machine ROPI UKM 380 Baujahr / Year 2003  Format / Size min. 60 x 100mm - 500 x 420mm Geschwindigkeit / (Belt) Speed max. 5.000 cycles/h. Materialgewicht / Materials 150 - 450g/m2 Dispersionskaltleim / dispersion adhesive Saugbandanleger für Non-Stop Betrieb / Suction belt feeder for non-stop operation Maschinendimensions / Machine dimensions Machine L 550cm x W 80cm x H 88cm Maschinengewicht / Machine weight 650kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Pgedpfx Ajznhtfsb Ior

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Podeyi Emyspfx Ab Iogr Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Pgedpfx Absd Iz Dfe Ier Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Pgedpfxsh Axd Ne Ab Ier On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 12, Kantenanleimmaschine - Edge Gluing Machine Jagenberg KAM 60Serial-No. 12.30124/11 Working width max. 60mm Kaltleim / Cold Glue system Pgodok Tu Ekepfx Ab Isr Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Kantenanleimmaschine / Edge Gluing machine Essor Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Psdpfxoymazts Ab Isgr

Condition: used, Dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf This device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 2535 Arbeitsbreite / Working width 500mm Pedsyq S Iyspfx Ab Iegr Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Zweiwalzen Anleimmaschine für Kaltleim als Tischgerät, dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf Two roller Gluing machine for Cold glue as table-top machine, this device will carry adhesive on the back of a material to be glued Pgodpfxszi E E Ij Ab Ijr Anleimmaschine  / Gluing Machine Prakma AM 500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 165347 Arbeitsbreite / Working width 500mm für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test