Used Mathis Laboratory Thermosal System Pad Dryer for sale (41,531)

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Ksdpfxeu D Arij Ai Rsna Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge Knodezunvajpfx Ai Roa

Condition: used, This listing is for a Pall Scientific lm50NCN-B4N Laboratory Filtration System The unit is in full working condition and ready for immediate use This laboratory filtration system is a high-quality lab instrument manufactured by Pall / Pacific Scientific (Model: lm50NCN-B4N). An industrial-grade filtration housing/system designed to provide reliable contaminant removal in bioprocessing or research applications. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Kodpfjzuf Uysx Ai Rena This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Loading via filling hopper, e.g. by wheel loader or conveyor system Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Kodpfx Aoztrpzoi Rena Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Knjdpfx Aijzd Unbj Rea Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. Knsdpfx Aijzr Irce Rsa • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. Kjdpfx Aezhcrvoi Rjna The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Kjdsv Si Szspfx Ai Rjna Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Kododzqn Uopfx Ai Rjna Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Knedpoinur Asfx Ai Rja Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Knodpfsyb Rpdsx Ai Rja The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 - Designed for washing parts in baskets - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Please submit a purchase price offer for the machine. Knsdpoxb Dcvsfx Ai Rja

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Kodpfxjvi Nhds Ai Rsna Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Year of construction: 2008, condition: not inspected (used), functionality: unexamined, power: 0.08 kW (0.11 HP), overall weight: 300 kg, total length: 1,170 mm, total width: 600 mm, total height: 700 mm, machine/vehicle number: 2-453-004192, No minimum price – guaranteed sale to the highest bidder! Knedpfjw Hrx Sex Ai Rsa Loading can take place on 08.09.2025 or 09.09.2025! MACHINE DETAILS Electrical data Voltage: 400 V Current: 16 A Power: 80 W Dimensions & weight Dimensions (L x W x H): 1170 x 600 x 700 mm Weight: 300 kg

Year of construction: 2011, condition: excellent (used), BURKLE PROCESS TECHNOLOGIES Düsentrockner-Anlage DURCHLAUFTROCKNER TRDUE 700 Nozzle Dryer System Knodpfx Aed R Sb Ioi Roa one-sided drying of various media on plane parts parts can be heated by the built-in IR emitter

Condition: used, Specifications Ilmvac Model: LVS 105 T-10 ef Ksdpfx Ajxx Na Usi Rjna Free Air Displacement, l/min. 60/50Hz: 20 / 17 Ultimate Vacuum Pressure, torr: 1.5 Maximum Vacuum, in. Hg: 29.86 Tubing needed, I.D. in. (mm): 1/4 (7) Weight, lbs. (kg): 21 (9.5) Power (Kw): 0.83 Input Voltage / Frequency: 90V – 260V, 50/60 Hz Good working condition. Please check out our other listings as well.

Condition: good (used), Drilling system / auger drill / 5-T-A / 4 T-A including coolant ring Drilling diameter, smaller drill: 48-65mm (overall length approx. 730mm) Drilling diameter, larger drill: 64-88mm (overall length approx. 755mm) Mount: MK5 or SK50 Kjdezvmi Uopfx Ai Rsna

Condition: excellent (used), Manufacturer: KUKA Model: KR 10 R900 sixx Controller: KRC4 Description For sale is a KUKA industrial robot as a complete system, comprising the robot arm, KRC4 controller, smartPAD, as well as connection cables and accessories. The system is suitable for a wide range of automation tasks in industrial production, such as handling, pick-and-place, assembly, feeding, positioning, or inspection processes. This 6-axis robot enables precise and fast motion sequences and is particularly well-suited for compact workspaces and automated production cells. Technical Data Robot Type: KR 10 R900 sixx Item No.: 10016515 Serial No.: 500874 Year of manufacture: 07/2013 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: approx. 52 kg Controller: KRC4 Item No.: 11019802 Serial No.: 224377 Year of manufacture: 2013 Controller weight: approx. 33 kg Supply voltage: 1 x 230 V Frequency: 50/60 Hz Full load current: 12 A Fuse protection: 16 A Total system weight (approx.): 90 – 110 kg Software / System KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 KSS: 8.2.21_SR Installed options: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Condition Used Visually, with normal signs of use System data and status as shown in the pictures Scope of Delivery KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Kodpoy Dt D Djfx Ai Rsna Connection and interface cables Accessories as shown in the images Additional Information Inspection possible by appointment Loading / shipping by freight carrier possible Commercial sale

Condition: excellent (used), KUKA Industrial Robot Complete System Type: KR 10 R900 sixx / KRC4 For sale is a KUKA industrial robot complete system from a commercial environment, consisting of the robot arm, controller, smartPAD, cable set, and additional accessories as depicted in the photos. This system is suitable for a wide range of automation tasks, especially in industrial production, assembly, laboratories, material handling, pick-and-place operations, inspection tasks, and general robotic applications. The 6-axis robot is designed for precise and rapid motion sequences and can be used for gripping, positioning, feeding, moving, and processing components. System components: - KUKA KR 10 R900 sixx robotic arm - KUKA KRC4 controller - KUKA smartPAD - Connection and interface cables - Additional accessories as shown in the photos Technical data of the robot: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article no.: 10016515 Serial no.: 500877 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Technical data of the controller: Controller: KRC4 Article no.: 11019802 Serial no.: 224374 Controller weight: 33 kg Input voltage: 1 x 230 V Line frequency: 50/60 Hz Full load current: 12 A Line fuse: 16 A System information / Software status as displayed: KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options as displayed: - ExpertTech 3.1.1 - Gripper & SpotTech 3.0.5 - OrangeApps.MqttClient 2.2.12 - Profinet KRC-Nexxt 2.2.7 - RemoteService 1.0.2 - UserTech 3.1.4 Dimensions / Weight: Total system weight including controller and accessories: approx. 90–110 kg Robot dimensions: Reach 901 mm Controller dimensions: compact KRC4 version Kodpfx Asy D Hd Roi Rona Condition: Used, from ongoing commercial operation. Visual condition with typical signs of use. The screen and system information are visible in the photos. For the external condition, please refer to the images. Scope of delivery: The images are decisive for the exact scope of delivery. The table shown in the photos is not included in the sale. Please note: Commercial sale. Subject to changes, errors, and prior sale. All technical information provided to the best of our knowledge, but without guarantee. We are happy to answer further questions by phone.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, Kedpezi Tmajfx Ai Rjna display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Knsdpoitcu Eofx Ai Rsa Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Kjdpfxsitcvue Ai Rena Speed: 107 U/min Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität air pressure max. 4 bar Kjdpfx Aiou Dn Uvs Rjna Pressure line 28 N / mm Capacity of dye tub Zwickel - 0,3 Liter Capacity of dye tub Becken - 1,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Kodpfx Aezbypyei Rjna Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Knsdpox R D Efofx Ai Rja Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file