Used Mhg Smg 50 for sale (37,860)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! Ledpfx Aszx S Iuomzeru TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents

Year of construction: 2024, condition: new, Work area 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight, negatively pressurized chamber in a robust steel sheet construction Work gloves Special rubber, abrasion-resistant, cotton lining, firmly connected to the chamber to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Ledpfx Ash Hxubemzjru Two side doors, dust-tight sealing, double-walled, sound-absorbing foam filling, lockable, with electrical shut-off protection Abrasive recovery Via a coordinated MHG recovery system Operation ON/OFF switch for extraction and lighting, pressure regulator, pressure gauge, and foot switch Viewing windows

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Ledpfx Amj Adzhrjzjru Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Lodpfxoz Eq Epo Amzsru Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: used, Year of construction: 2019, Manufacturer: MHG, Type: SMG 160, Year of manufacture: 2019, Serial number: 9264, including stationary dust extraction unit, manufacturer: Eferest, Type 100 l, Serial number: 18-673-1-4, 12 bar, Year of manufacture: 2018, dust collector, Model 1703-2.2, air flow rate 1,800 m³, 2.2 kW, stainless steel container, 3 wheels, mobile, capacity approx. 100 l Ljdpfx Ajz Tqy Remzeru +++ ATTENTION: This item is part of an online auction! +++

Condition: ready for operation (used), Shot blasting system MHG SMG 45 K (negative pressure booth) -Work area: 1100x660x700 mm -Integrated dust extraction system -Two side doors / dust-tight sealing -System with double walls, sound-insulated and foam-filled -Blasting gun with nozzle -Operating pressure: 3 - 7 bar -On/off switch for lighting and dust extraction -Pressure regulator - Manometer - Foot switch -Viewing window -Documentation Ljdpfjztrk Eex Amzjru Dimensions: L x W x H 1.5 x 1.6 x 1.8 meters / Weight: 380 kg Subject to errors and omissions.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Description WE OFFER AN VERY NICE CONDITION PRESS FOR DEEP DRAWN PARTS DOUBLE ACTING FROM UP DOWN MACHINE WAS USED ONLY FOR A SMALL UNIQUE WORK OF ART LIGHTS FOR AN DESIGNER PRODUCTION MACHINE HAS TRIPLE PRESS DEVICES MACHINE HAS BEEN HIDRAULIC RETROFITTED IN 2005 NOT LONG AGO , AND IT IS READY TO USE MAX DRUCK: 140 TON + 80 TON ADDITTIONAL MAX BOTTOM POWER : 60 TON APPROX MACHINE WILL BE AWAILIBLE TO PICK UP AFTER NEW YEAR IN 2025 FROM SECOND WEEK IN JANUARY Specifications Manufacturer SMG Model HZPUX 100/50-1000/850 Lrjdsvlduwjpfx Amzeu Year 1957 Condition Used

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Lredpfszv T Iwex Amzju

Condition: used, Year of construction: 1978, Press force: 500 t Stroke: 600 mm Frame width: 1550 mm Side frame opening: 1250 mm Shut height (stroke up): 900 mm Table area: 1200 x 1300 mm Cushion force in table: 250 t Cushion stroke in table: 150 mm Cushion area in table: 950 x 950 mm Table height above floor: 1245 mm Lredpfx Amjzyl Drezeu

Condition: good (used), Year of construction: 1981, functionality: fully functional, WE OFFER AN NICE CONDITION PRESS SMG DZ 100-750/560 WITH SAFETY SICK CONTROL BARIER POWER: 1000 KN Lrsdjvldxpopfx Amzeu MACHINE IS AWAILIBLE IMEDIATELY FROM STOCK.

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: Lredpoyap Icefx Amzsu - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Year of construction: 2019, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, operational hours counter: 2169h, with Deduster MHG 1703-2,2 and various accessories. Lrsdjlubvbjpfx Amzsu

Condition: used, • Manufacturer: MHG Strahlanlagen GmbH • Max. glass thickness: 70 mm • Max. glass size: height 1500 mm, length 3,000 mm • Open top • Dimensions: L 6200 x W 2500 x H 3000 mm • Total height: 2300 mm • Number of nozzles: 2 + 1 manual hand gun • Complete documentation available • Blasting speed steplessly adjustable: 100 – 500 mm/s • Blasting nozzle diameter: 6.5 mm • Air consumption at 6 bar (L/min): 1200 litres with 2 nozzles Lodpfxsxu Au De Amzeru • Connection values: 230/400 V/50 Hz/3x16 A

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Lrodpfx Ameuqdi Uszou Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Lsdpjw Duvhsfx Amzjru

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer. Lrsdpjz Tf D Rsfx Amzsu

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Lodpfx Amozn N H Tszoru

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Ledpfedzp Tcjx Amzoru Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Year of construction: 2008, machine/vehicle number: 240-124, functionality: fully functional, pressing force: 160 t, stroke length: 800 mm, table width: 1,600 mm, table length: 1,200 mm, table height: 650 mm, total length: 1,900 mm, total width: 3,600 mm, total height: 3,300 mm, Equipment: documentation/manual, Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm For sale is a hydraulic sub-platen press from the manufacturer LÄPPLE with a maximum pressing force of 160 T. The machine has a table size of 1,200 × 1,600 mm, an open height of 1,050 mm, and a stroke of 800 mm, and is particularly suitable for forming, straightening, pressing, and assembly work in industrial applications. The press is equipped with a PILZ control system and has an electrical version for operation on a 3 × 400 V AC power supply. ##### Technical data + information: Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm ==== General information - Reference ID: TPT-07 - Manufacturer: LÄPPLE - Type: Hydraulic sub-platen press - Model: TV1600-50 - Machine number: 240-124 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 1,200 × 1,600 mm - Table height: 650 mm - Open height: 1,050 mm - Stroke: 800 mm - Overall height: 3,300 mm - Overall width: 3,600 mm - Overall depth: 1,900 mm - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 240 bar - Idle travel downwards: 10 mm/s - Idle travel upwards: 28 mm/s - Initial pressing speed: 10 mm/s ==== Hydraulics & drive - Main motor: 22 kW ==== Control system - Control system: PILZ - Control panel: on the frame - Electrical design: EPLAN 5.40 - Electrical documentation: wemascon Zeulenroda GmbH Ledpfx Ao Ad Antemzjru ==== Safety - Safety control system: PILZ - Light curtain / light barrier: available - Two-hand operation: available - CE-compliant design - Slug damping: no - Maintenance platform: no ==== Electrical connection - Main supply: 3 × 400 V AC - Frequency: 50 Hz - Power supply: PE/N - Fuses: 63 A - Rated current of the system: 47 A - Control voltage: 24 V DC ##### Application areas: Forming, straightening, pressing, assembly work, toolmaking, mechanical engineering, metal processing, maintenance, pressing operations, series production (Hydraulic sub-platen press, sub-platen press, hydraulic press, LÄPPLE press, LÄPPLE TV1600-50, 160 T press, 160-ton press, forming press, straightening press, pressing press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of customized machines and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns working height : 2000 mm OPEN TOP including air compressor and dryer . voltage : 230/400 V 50 Hz Lrjdpfx Ajz Dt T Tjmzou

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: CD.23.009-3, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Technipes TE 2/50 SG/TV + LC21 semi-automatic bagging system with gross weigher, year of manufacture 2024 Ledpfx Asz Sy Eaomzoru Semi-automatic open-mouth bagging station for powders and granulates, 3.5–25 kg (max. 30 kg), from a gluten-free flour and dry-mix co-packing plant. - Gross weigher with Siemens SIMATIC HMI - 2 stainless steel hoppers with screw feeders - Fischbein model 100 bag closer - Belt conveyor 385 cm long, 50 cm wide (40 cm conveying width) - Free-standing control cabinet with push buttons and emergency stop, approx. 80 x 40 x 200 cm Overall dimensions: approx. 385 x 230 x 307 cm (to top of hopper) Condition: used Lot 81. The Thermo Scientific APEX 100 metal detector with conveyor from the same packing room is lot 82. Also in this auction: a second semi-automatic Technipes TE.2/50 S/TV, 2024 (lot 156), and two fully automatic Technipes TE.2/50 bagging lines, 2024 (lots 42 and 46). Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 1.175 excl. VAT for this lot.

Condition: used, Year of construction: 2023, Manufacturer: Ilapak Italia S.p.A. (IMA Group) Year: 2023 Type: Complete bagging line LINE-UP 1. Belt conveyor – Service PTNMSX 2. Z-type lift with cleats – Service PTNMSX-Z 3. 14-head combination weigher – Ilapak Weightronic WA 14/50 4. Vertical form-fill-seal (VFFS) bagging machine – Ilapak Vegatronic VT2000 OF P 5. Stainless steel platform (gantry) – FQS Maximum line dimensions: 4.81 x 3.00 x 7.35 m (H) (technical data sheet) Designed for use in cold/damp environments (deep-frozen products) 1. VEGATRONIC VT2000 OF P VERTICAL BAGGING MACHINE Vertical form-fill-seal (VFFS) bagging machine, Open Frame version Forming tube and neck Vertical longitudinal seal Horizontal cross-seal jaws with integrated cutting blade Film drive via belts Bag length controlled by encoder Maximum mechanical output: 70 bags/min Film reel: Max. Ø: 600 mm Width: 400 mm Core: Ø 76 mm Max. weight: 50 kg Current format: Ø 170 mm (can be changed on request) HMI touch-screen control 2. WEIGHTRONIC WA 14/50 MULTIHEAD WEIGHING MACHINE 14 heads – 1 pre-dosing basket + 1 weighing basket per head 15 load cells: 14 weighing baskets + 1 beneath the central cone Central distribution cone Electromagnetic radial vibrating channels, which can be dismantled without tools Ouverture des paniers par moteurs pas à pas – cames paramétrables Timing hopper Unloading via 4 removable chutes into the outlet hopper Maximum speed: 90 strokes per minute Bucket capacity: 5.0 l Volume maximal de vidange (par déversement) : 12,5 l Plage de poids de vidange (par déversement) : 100 g - 3 000 g Maximum length of parts: 150 mm Modes: weighing or piece counting, mixing of up to 4 batches, multiple discharge per bag Automatic tare and calibration Ilapak HMI touchscreen Control of up to 4 external feeders Contact parts that can be removed without tools and are numbered per head AXIS F1035-E surveillance camera above the weighing machine – real-time display on the HMI (augmented reality mode) 3. PRODUCT POWER SUPPLY ( SERVICE) PTNMSX belt conveyor: - AISI 304 stainless steel frame - Modular PP belt - Effective width: 533 mm - Effective length: 2405 mm - Loading/unloading height: 3080 mm - Speed: 22 m/min - SEW SA37 gear motor – 0.37 kW – IP65 - Power supply: 400 V three-phase – 50 Hz - Wash ramp with 10 nozzles PTNMSX-Z Z-lift: - AISI 304 stainless steel structure - Modular PP belt with cleats – pitch 203.2 mm - Effective width: 403 mm - Effective length: 5,300 mm - Loading height: 2,660 mm - Unloading height: 5,215 mm - Speed: 24 m/min - SEW SA47 gear motor – 0.75 kW - Power supply: 400 V three-phase – 50 Hz - Stainless steel loading hopper Lodpj Ad Rv Esfx Amzoru - Inspection hatches Conveyor control via the bagging machine control cabinet 4. FQS GANTRY PLATFORM Stainless steel tubular structure designed for washing Weighing machine support above the bagging machine Staircase with stringers and steps made of folded sheet metal Stainless steel handrails Bolted assembly (dismantlable) DOCUMENTATION AVAILABLE EC Declarations (production lines and machinery) Declarations of incorporation for conveyors User manuals (FR / IT) Risk assessments (FR) Electrical and pneumatic diagrams Illustrated parts lists (IPB) Recommended spare parts lists (RSPL) Food contact certificates Equipment dismantled and stored on Osertech's premises.

Condition: used, Year of construction: 2013, operating hours: 33,559 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Lrsdpfxs Advfro Amzou Manufacturer: DMG MORI Model: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Machine weight: approx. 9.8 t Spindle hours: approx. 48,437 h Operating hours: approx. 33,559 h Condition: Used Available from December 2026 Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 Lodpfx Ams Aaaqqjzsru 400V, 50Hz, 9.8kW, 15A Weight: 130 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Mazak HCN5000/50 + Cellro Elevate Automation Lredez Nhfiopfx Amzju