Used Msk Fb for sale (1,256)

Condition: used, Year of construction: 2018, functionality: fully functional, ROUNDWOOD PROCESSING LINE Line supplied by MSK a.s. in 2018, supplemented with a vertical band saw from J. Bögli AG. The line was built in 2018. The band saw is older, but its exact year of manufacture is not known. The band saw can process logs with diameters from 30 cm to 100 cm; the maximum log length is 10 metres. The line itself is designed for a maximum length of 5 metres. When longer logs are sawn, they can be discharged from the band saw via conveyors No. 15 and No. 16. The cant cross-cut saw has a minimum cutting length of 800 mm and a maximum length of 5 metres. The twin-shaft multi-rip saw has a maximum cutting height of 215 mm and a maximum width of 600 mm. In 2024, the line was supplemented with a Skywood twin-shaft circular saw for processing small-diameter logs from 12 cm to 46 cm. Log length: minimum 2 m, maximum 5 m. The line can operate in parallel (band saw and Skywood) or independently with either one of these machines. Required staffing for line operation: Band saw 1 Skywood 1 Kdedpfx Agozta Ifo Aou Cant cross-cutting 1 Multi-rip saw 2 Cross-cutting, edging and sorting of side boards 2-3 JCB / forklift 1

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 612200, total length: 11,700 mm, total height: 6,200 mm, total width: 3,130 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 2,900 mm, product height (min.): 500 mm, product length (max.): 2,400 mm, product width (max.): 1,200 mm, input voltage: 400 V, compressed air connection: 6 bar, working height: 3,200 mm, input frequency: 50 Hz, transport length: 3,900 mm, throughput speed: 32 mm/s, air demand: 6 m³/h, workpiece weight (max.): 1,500 kg, Equipment: documentation/manual, safety light barrier, Brand new, never used, packaged by the manufacturer, delivered and stored in a temperature-controlled hall in Hungary. Kdedjyrnr Rspfx Ag Aju

Year of construction: 2011, condition: used, MSK Covertech Tension Tech Stretch Hood Wrapping Machine. S/No. 371-3 (2011) Kdedpfx Agjz I Suwj Asu Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,631 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 125 mm, fuel type: electric, mast type: duplex, fork carriage width: 1,070 mm, fork length: 1,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,700 mm Free lift: 125 mm Fork length: 1,400 mm Fork carriage width: 1,070 mm Fork width: 161 mm Fork thickness: 57 mm Fork adjustment range: 560–2,080 mm MACHINE DETAILS Mast type: Duplex Power: 20 kW Front tires Tire type: Non-marking Tire size: 23 × 10–12 Tire condition: 40–60 % Rear tires Tire type: Non-marking Tire size: 18 × 7–8 Tire condition: 20–40 % Battery voltage: 80 V Battery capacity: 625 Ah Battery manufacturer: Exide Battery type: PzS Battery year of manufacture: 2021 Battery condition: 40–60 % Unladen weight: 5,593 kg Overall length: 2,479 mm Overall width: 1,195 mm Overall height: 2,585 mm Operating hours: 3,631 h EQUIPMENT Load protection grid Push fork Side shifter Fork positioner 3rd valve 4th valve Rear work light Front work light Heater Solenoid valve Full cabin Air conditioning CE certificate Non-marking tires LED lighting Seat Noise-reduced hydraulic pump Panoramic mirror Rear dirt guard Load weight indicator Ksdpfx Agjz Hvl Ds Ajdu Automatic parking brake Dual pedal Air-suspended comfort seat with fabric cover Spring-mounted cabin Reading light Horizontally and vertically adjustable armrest Side battery changer with access pallet including side battery cover I_Site fleet management including PIN code and shock sensor Smart Access Additional cable inside the mast on the left side for the 5th hydraulic function Radio

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Kedpj Aa Im Tefx Ag Aodu Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Kdedpfsznyx Hjx Ag Aeu Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, The chip conveyor is a single conveyor designed to continuously and reliably transport short, broken metal chips from the machining area of the machine tool to a collection container, while simultaneously separating the metal chips from the coolant. This ensures more efficient production processes, improved dimensional accuracy of the workpieces, and a longer service life of the coolant. Kjdpjclu H Usfx Ag Ajdu The chip conveyor consists of a metal housing with a central chain and carriers. It is driven by a 230 V three-phase geared motor, which can be connected to the machine tool via a plug. Oil return.

Condition: used, Manufacturer: MSK Tip: KOMBI-MULTITECH Year of manufacture: 2007 manual Kedjq U Rhpopfx Ag Ajdu The device is already disassembled and can be delivered immediately!

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Kdodpfxoz I D Ate Ag Asu

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, operating hours: 35,000 h, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine can still be inspected in its current operational state at the factory in Northern Germany. Working length: 4100 mm Distance between columns: 3650 mm Pressing force: 170 tons Kdsdj Abaq Hopfx Ag Asu Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Includes tool cabinet with tools.

Condition: used, Year of construction: 1994, functionality: fully functional, Gravity belt filter Kdsdpfx Agez R Amqj Aju Stainless steel construction. Designed for the separation of solids from process water, oils and emulsions using nonwoven filter media. Includes a compartmentalised main tank, metal support belts, discharge rollers, geared motors, 3 centrifugal pump units, stainless steel manifolds and piping, valves, pressure gauges, level controls, electrical control panel, platforms, stairs and handrails.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Feed rate Z: 8-400 mm/min Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet Ksdpezq Efqjfx Ag Aodu >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: used, Year of construction: 1999, Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement. Kodpfxjz N Ha Es Ag Aedu

Condition: used, Year of construction: 2002, x-travel 1200 mm y-travel 600 mm z-travel 600 mm control Sinumerik 840D SIEMENS table-size 1.420 x 600 mm table load 2,0 t spindle taper ISO 50 spindle turning speed range 4.000 U/min feed 2.000 mm/min Kedpfx Age Adbzlo Aodu rapid traverse 10,0 m/min voltage 400 V total power requirement 42 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,60 x 2,45 x 2,15 m coolant tank 1,25 x 1,25 x 0,50 m - Serial-No.: 076 - Control system: SIEMENS Sinumerik 840D - Electric handwheel - Hydraulic tool clamping with foot switch - SEMPUCO universal milling head - Coolant system

Condition: good (used), Year of construction: 1986, functionality: fully functional, Line for finger jointing (microjoints). The inverters in the control cabinets have been replaced with new ones. Kodpfeynkzgox Ag Aedu

Condition: used, Year of construction: 2018, functionality: fully functional, total width: 750 mm, total height: 160 mm, total length: 1,800 mm, input voltage: 24 V, overall weight: 55 kg, Manufacturer: Heber Year of manufacture: 2018 Overall dimensions (L x W x H) in mm: 1,800 x 750 x 160 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor width in mm: 500 Conveyor height in mm: 150 Curve (degrees): 80 Curve radius, inner in mm: 800 Curve radius, outer in mm: 1,200 Ksdpfxez Sx Rzo Ag Aedu Direction of travel: possible in both directions Support roller shaft type: steel, internal thread Support roller diameter: 50–80 mm Support rollers per shaft: 1 Support roller material: steel – plastic-coated Roller pitch, internal (mm): 70 Roller pitch, external (mm): 120 Drive: motorised roller Motor manufacturer: Interroll Motor specifications: 24 VDC / EC310 Conveyor speed in m/s: 0.6 Net weight in kg: 55 Special features: one curve consists of 2 x 40° Curves, each with one motorised roller Condition: used / fully functional Functional test: OK

Year of construction: 2005, condition: used, Belt conveyor Finnrose Technical data: - Manufacturer: Finnrose - Type: FB 2.0 - Length: 2,000 mm - Year of manufacture: 2005 - Belt width: approx. 1300 mm - Overall width: approx. 1460 mm - Speed: approx. 3 - 10 m/min continuously adjustable via a handwheel Kdedpfx Aoz Ei Ddeg Aeu on the adjustment gearbox, 2.4 - 18 m/min. - Conveyor belt suitable for maximum ambient temperatures of up to 70 degrees Celsius - Height: 900 + - 50 mm - Motor power: 0.75 - 1.5 kW Ex - Location: Warehouse D-32825 Blomberg

Condition: like new (used), Year of construction: 2023, Felder FB 510 Professional Wood Band Saw – 2023 – Made in Austria Kjdpfxjyq N Azj Ag Aedu For sale: Felder FB 510 professional band saw, manufactured by Felder Group (Austria). This is a high-quality, industrial woodworking machine designed for precise cutting and heavy-duty workshop use. The machine features a robust frame and a large cast iron table, ensuring stability, accuracy, and a long service life. Technical Specifications Model: Felder FB 510 Year of manufacture: 2023 Motor power: 3.0 kW Power supply: 400 V / 3 Phase / 50 Hz Current: 6.4 A Blade length: 4293 – 4343 mm Blade width: 6 – 25 mm Max cutting height: approx. 410 mm Max cutting width: approx. 490 mm Heavy-duty cast iron table Made in Austria Condition This machine is in very good working condition, well-maintained and ready for immediate use. Ideal for: Carpentry workshops Furniture production Wood processing facilities Professional woodworking applications

Condition: used, Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 80 mm, total width: 600 mm, total height: 150 mm, total length: 10,000 mm, conveying length: 10,000 mm, input voltage: 24 V, axle spacing: 80 mm, overall weight: 300 kg, TAF item number: 1000006288.1 Manufacturer: Heber Fördertechnik Year of manufacture: 2016 Overall dimensions (L x W x H) in mm: 10,000 x 600 x 150 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor width in mm: 500 Kedsz Ibzgspfx Ag Asdu Conveyor length in mm: 10,000 Conveyor height in mm: 150 Roller pitch in mm: 80 Support structure: none Support roller axle type: steel, bolted Support roller diameter in mm: 50 Carrying rollers per axle: 1 Carrying roller material: steel Drive: 24V motorised roller Motor specifications: Interroll, 24V, EC310, 0.05, 0.18 Conveyor speed in m/s: 0.6 Net weight in kg: 30 (per linear metre) Condition: used / fully functional Functional test: OK

Condition: used, Year of construction: 1984, Width: 84in, gauge: E24, yarn feed: EBC, hole needles: GB1-2-3, speed: 1,000rpm, pattern gear: N-gear GB1-4, yarn monitoring: Laser 4080, with brushing unit, an on-site inspection is possible. Kdedsz Eprujpfx Ag Aju

Year of construction: 1998, operating hours: 10,000,000 h, condition: good (used), functionality: fully functional, Carton Forming and Gluing Machine Manufacturer: Boix Model: FB-20/E Year of Manufacture: 1998 Adhesive System: Hot Melt Injection (Nordson) Production: 1200 Cartons/Hour Min. Carton Size: 300x250x80 mm Max. Carton Size: 600x400x170 mm Max. Carton Sheet Size: 950x940 mm Kdedpfx Agev T Dgpj Aeu

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Kdsdpfxsyvra Ij Ag Aju Accessories: ----- • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Condition: like new (used), Year of construction: 2018, Modular belt, belt length 2,450 mm, Kraus – used: Price ex works: only €3,950 (net), disassembled, packed, and loaded! Industrial conveyor belt with a robust, profiled frame design. Reliable and robust, it is suitable for: • Transport of molded parts, • Machine discharge of components for removal (integrated/partially integrated/self-contained), • Transport of various materials Manufacturer: Kraus Betriebsausstattung und Fördertechnik GmbH, AT-Klagenfurt Type: FB 90 MODUL Year of manufacture: 2018 Technical data: Maximum total load capacity: 100 kg Conveyor speed: 2 m/min Belt length: 2,450 mm, overall length approx. 2,600 mm Frame width: 1,300 mm Belt width: 1,200 mm Height: approx. 920 mm Belt design: Modular belt 1" PP/grey FDA Drive: Gear motor, SEW 230/400V – 50Hz, IP54 Installation position: Floor Design: Frame: galvanized profiles with bolted cross braces Connection cables for connecting to a machine / Harting connector Installed signal cables for 2 x light barriers / Harting connector Original new price: €7,000 (net) Condition: Like new, scratches on the motor housing Operating hours: < 100 operating hours Available: immediately Location: Warehouse Frankenberg / Saxony Kdsdpoz I Einjfx Ag Aju

Condition: used, empty load weight: 4,760 kg, maximum load weight: 27,240 kg, overall weight: 32,000 kg, first registration: 04/2009, total length: 8,050 mm, total width: 2,550 mm, total height: 3,150 mm, Equipment: ABS, electronic stability program (ESP), tail-lift, Key Features Internal Reference: 23566M Chassis Number: W09 008 2MM 8HM 091 86 Serial Number: 410.289.337 Vehicle Model: MSK 18 Tipper Vehicle Make: Meierling Product Category: Tipper Condition: Used Date of First Registration: 07.04.2009 Last Inspection (MFK or TÜV): 18.01.2023 Suspension: Air-Air Cab Vehicle Equipment: ABS, ESP Number of Seats: 2 Kdsdpfx Aez Hp Uleg Asu Axles & Tires Axle 1: 385 / 65 R 22.5/10mm, Drum Brakes, Air Suspension Axle 2: 385 / 65 R 22.5/5mm, Drum Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 32000 Payload: 27240 Unladen Weight: 4760 Vehicle Height: 3150 Vehicle Length: 8050 Vehicle Width: 2550 Body Body Manufacturer: PETER Body Model: MSK 18 Tipper Body Year of Manufacture: 2009

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Kedjvytfujpfx Ag Aodu Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.