Used Nestro Paint Mist Extraction for sale (7,622)

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Nedpjvvizkefx Ag Dsla

Condition: good (used), Year of construction: 1994, functionality: fully functional, volume flow: 8,900 m³/h, filter area: 5 m², type of input current: DC, suction capacity: 8,900 m³/h, rotational speed (max.): 1,500 rpm, space requirement height: 1,100 mm, space requirement length: 2,200 mm, space requirement width: 1,100 mm, Schuko supply air unit with 110 kw heating coil and various angular and round pipe components Cross-flow heat exchanger Deflector hood Supply air ceilings Shut-off dampers - all Schuko brand Nlodpfx Agst Rv Txj Dja Without switch box

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Nlsdpjwydgzjfx Ag Dea

Condition: good (used), functionality: fully functional, Paint mist extraction system/suspension rail Njdpfxsx T Amyj Ag Dola - incl. suspension rail, dimensions: approx. 10000 x 7000 mm - incl. various hanging brackets, paint trolleys, and a paint mist extraction unit - extraction unit dimensions: 3000 x 1000 mm Note: The item must be picked up bindingly between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Nedpjbumr Sofx Ag Dsla Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Nodeiau Tzspfx Ag Dsla Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, volume flow: 6,000 m³/h, filter area: 4 m², total length: 2,000 mm, total height: 2,000 mm, overall weight: 300 kg, power: 2 kW (2.72 HP), pipe diameter (max.): 400 mm, Paint mist extraction wall, spray wall, exhibition device, paint area approx. 2,000 x 2,000 mm, incl. side baffles, motor in ATEX version - immediately available - Nedpfx Agowrnype Dsla

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: Nlodpswv T R Uofx Ag Dea - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg Njdpfx Agjwv Nbcj Dela

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology Njdpfxeu T Hrpe Ag Djla with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: used, Year of construction: 2025, New demonstration machine! List price €4,367 net. Sturdy, galvanized steel sheet construction. Work surface equipped with a special folded cardboard filter, an additional post-filter, and a filter cassette for floor-level extraction. All filters are easily and quickly replaceable. The built-in radial fan, explosion-proof design, features an impeller made from steel sheet. The explosion-proof drive motor (EEx nA II) is mounted outside the airflow and drives the fan directly. The supply cable is 10 meters long and a plug-socket switch combination with integrated on/off switch is included. Attention! The switch is not explosion-proof and is only suitable for use outside of explosion-hazardous areas. The fan outlet is located at the top. The air outlet is directed vertically upward. Nljdpfx Asy Ehlrjg Dja This spray mist extraction wall complies with the latest regulations. Designed for installation in paint shops in zone 2, where the average calculated concentration of flammable solvents is limited to less than 25% of the lower explosion limit. Technical specifications: - Max. air volume: 3,500 m³/h - Exhaust connection: 300 mm - Work surface: 2,000 x 1,000 mm - Required space: 2,600 x 920 x 1,420 mm (H) - Motor: 1.50 kW, EEx nA II T3, IP 55, 1,500 rpm, B5, 400 V, 50 Hz - ATEX marking: Ex II 3 G - Sound pressure level: 75 dB(A) - Weight: 220 kg - Fan: left - Folded cardboard filter: 1,000 x 2,000 mm – 1 pc - Folded cardboard filter 1,000 mm wide (no. 2072091295) – each as a 10m pack, flame-retardant according to DIN 53438 F1/K1, cut length = 25 folds per 1,000mm - 2072090518 filter cut for Paint-Star – 1 pc - 2072091473 cassette filter for Paintstar – 1 pc Storage location: Rieth

Condition: excellent (used), Servatechnik extraction Nedpfx Aox Nbnneg Dsla

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Nodpfey Dpfwsx Ag Djla Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: used, Paint mist extraction system, approx. width 1200 mm, height 2200 mm, extraction motor mounted on top Nedpfjyl Ippjx Ag Dola

Condition: used, With bottom extraction attachment Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Nlodpfx Agsyxm Ekj Dsa Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Comes with control system

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Edge extraction with fan Nsdeyuf S Hspfx Ag Dsla Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Condition: used, Year of construction: 1999, Paint booth extraction system Nlodpfeyvkwfjx Ag Dja Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Self-dismantling Price: 3500.- Location: 1230 VIENNA

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Nljdpeuyh R Aofx Ag Doa Depth (mm): 600/800

Condition: good (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 212018, NESTRO Paint Mist Extraction Unit Model NFW 2015 Used Machine Serial No.: 212018 Year of manufacture: 2001 Article number: JA_G260201 Description: Working area (L/W): 2000 x 1500 mm Airflow: 7000 m3/h Pressure: 450 Pa Power supply: 380V / 50 Hz 2.2 kW Exhaust duct diameter: 350 mm Footprint (W x D x H): 3000 x 800 x 1600 mm Weight approx.: 360 kg Condition / Performed work: - Item cleaned - Item functionally tested - Age and usage-related signs of wear - Available ex stock Note on used equipment: • Prices are ex works (unless otherwise specified!) from our location in Ottendorf-Okrilla, Germany – loaded free of charge! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice showing VAT. • All items are sold as inspected, with no warranty or guarantee claims of any kind. Njdpfjygv D Dex Ag Dola Prospective buyers are welcome to inspect the items at our premises. • Our general terms and conditions apply. • Special agreements are only valid in written form. • Any items shown in the background of pictures are not included in the scope of delivery. • Saw blades are for illustration purposes only and not included in the sale. Shipping options: • We are happy to provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is possible by arrangement and free of charge. (Assembly and operational instruction for demonstration purposes available upon request and subject to agreement!) • Delivery may be partially disassembled. • Optionally, our trained service personnel can assemble the machine at your site and provide a brief introduction. Travel, transport, and service times subject to additional charge.

Condition: excellent (used), AZZURRA CS4B Spray Booth Wall Length: 4000 mm 2x cardboard filters Pint Stop filters Filtration capacity ~ 15,000 m3/h Motor power: 4.0 kW Nlsdoyh E Hnepfx Ag Dsa CE marking

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Nljdjxz Achspfx Ag Dea Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: good (used), Year of construction: 2001, Well-maintained clean air extraction system from a carpentry workshop with low operating hours. Höcker Polytechnik EA 250-4A With fire extinguishing system Nljdpfx Aoyxhrleg Dea Connection: 250 mm Airflow: 4,241 m³/h Power: 4 kW

Condition: used, Used item Features and technical data: - with manual changeover lever, painted, stable - Connection diameter: 350 mm Nlsdpsyq T Izjfx Ag Doa Dimensions: approx. 1240 x 900 x 450 mm Availability: short-term Storage location: 63934 Röllbach

Year of construction: 2014, condition: ready for operation (used), A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible. Nlsdpfswnr Ipox Ag Dja

Condition: ready for operation (used), OIL MIST EXTRACTION, CENTRIFUGAL OIL MIST EXTRACTION, EONAG 3000 Used machine Manufacturer: Innovations-Center Type: Eonag 3000 Year of manufacture: 2012 Enclosure dimensions: 1000 x 570 x 1750 mm Nlsdpfx Aju Nu Rhog Dja Electrical data: 400 V; 50 Hz - 4000 m³/h - 84 dBA - 2800 l/min