Used Netzsch 40 Platten for sale (21,396)

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump. Rsdpjnh Nr Iofx Aizet

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 145 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Rsdpfx Asfbbqhjizet

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 25 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic. Motor hydraulics with single acting cylinder. Rsdpfx Aiji Igi Ijzjt Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Rsdpfx Aoxxrhnsizjt Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: like new (used), Technical data for the wide-span shelving system: Racking system: SSI Schäfer Type: WR 600 Technical data for installation: Number of rack rows: 01 pcs. Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x wide-span shelving uprights, second choice (new) Material color: sendzimir galvanized Upright profile: 60 x 31 x 1 mm Incl. cross and diagonal braces, 01x swivel castor / stop castor | 01x fixed castor Castor Ø: 100 mm (bolted framework) 2,195 mm high 1,050 mm deep 08x Wide-span shelving traverse, second choice (new) Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: ASM50-CES80|40|1.5 Version: Stepped crossbar Rodoqhkh Aspfx Aizjt Bracket: 5 HK (hooks) Clear width: 2,400 mm 04x chipboard II. Choice (new) Thickness: 22 mm Dimensions: 2,380 x 960 mm Design: all-round butt joint 16x locking pins, new Design: completely galvanized To secure the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 160 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW | 25 kN centrifugal force | 400 mm working width | Hatz diesel engine 1B20 with 3.1 kW Item number: 5000610035 Technical specifications: Manufacturer: Wacker Neuson Model: DPU 2540 H Condition: NEW Operating weight: 160 kg Frequency: 90 Hz Centrifugal force: 25 kN Working width: 400 mm Engine: Hatz 1B20 diesel engine Engine output: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty Area performance: approx. 624 m²/h Highlights & Equipment: - Compact diesel vibratory plate, suitable for a wide variety of applications - Robust construction – ideal for daily use on construction sites - 400 mm working width – for precise compaction even in tight spaces - Ergonomic guide bar – low vibration & comfortable operation - Reliable Hatz diesel engine – powerful & fuel-efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-size surfaces ✓ Landscaping and gardening ✓ Municipal projects & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized construction sites Options: Surcharge only in combination with machine: - EquipTrack Beacon: €49.00 Rjdpjy Ipckjfx Aizet ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as run hours, service intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information is provided without guarantee. Subject to errors and prior sale. Prices excluding VAT Further models and sizes available! Also in stock: DPU 2550, DPU 3050, DPU 3750 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2540 H NEW | Diesel Compactor 25 kN | Vibratory Plate 400 mm working width | Hatz engine | Wacker Neuson Compaction Technology | Plate Compactor for Paving Applications Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! Virtual viewing of the machine via video call available on request.

Condition: used, We are offering used grating panels for sale. TECHNICAL DATA Redpfoy H Hc Sox Aizot Dimensions: 600 x 1,630 x 40 mm Mesh size: 45 x 25 mm Surface: galvanized Condition: used PRICE €150.00 net per unit (10 pieces) €178.50 gross incl. VAT Available quantity: 304 pieces YOUR CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The extra costs depend on the place of delivery and the volume of the shipment and can be quoted individually upon request. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding, customized quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for intralogistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and trade sectors. We regularly offer attractive used equipment from various manufacturers at excellent conditions. If you have any questions, please do not hesitate to contact us. "Four wins" – The cornerstones of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions.

Condition: used, We offer used grating panels here. TECHNICAL DATA Dimensions: 1,400 x 1,000 x 40 mm Mesh size: 35 x 35 mm Surface: galvanized Condition: used PRICE €210.00 net per sales unit (10 pieces) €249.00 gross incl. VAT Available quantity: 10 pcs YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Redpfjy H E I Tsx Aizot Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional cost. The extra costs depend on the delivery location and shipment size, and can be quoted individually upon request. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailored quotation. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per piece/net price or as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and crafts. We constantly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: Rsdpfx Asw U Dt Nsizjt The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw Rsdey Ic H Njpfx Aizst

Condition: used, Multiple knife mill / granulator with rotor with 16 knives Rsdjy Icdzjpfx Aizst 6 stator knives Drive 90 kW With equipment

Condition: used, Used Netzsch model PMD VC2500 stainless steel variable capacity pre-mix disperser. Approximately 600-2500 litre working capacity. Unit has welded base and bolted dished top head. Has top entry stainless steel 3-tier 4-blade pitched paddle agitator direct driven by 7.5kW, 415 Volt, 3/50, 1435rpm motor via Renold model PM60 gearbox rated 48.2/1 reduction ratio. Unit has bottom entry stainless steel scraped surface agitator belt driven by 7.5kW, 3/50, 1,440rpm motor via Renold model SMH8 gearbox rated 25/1 reduction ratio. Has external heating/cooling jacket. Unit has bottom discharge. Rsdpfx Aioy Ddv Dezjt

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Redpfxsvwg Tmo Aizst

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Redpfxexn Azdj Aizst

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching. Rjdpfey Hgi Sjx Aizet

Condition: excellent (used), For sale: horizontal planer/slotting machine from a renowned manufacturer: Ing. Karl Anderle, Steyr (Austria) Rodpfx Aijy E N Tdezjt Robust, heavy-duty industrial machine – ideal for workshop, toolmaking or production. 📊 Technical data: Manufacturer: Ing. Karl Anderle Type: 40 Year of manufacture: 1962 Machine number: 948/336 Working speeds: 30 / 60 / 90 / 180 strokes/min ⚡ Motor data: Manufacturer: FFD Wien Type: DU 1.5/2/4 Power: 2 / 1.5 HP Supply voltage: 380 V Current: 3.3 / 2.9 A RPM: 2800 / 1400 rpm Frequency: 50 Hz 2-speed motor ✅ Condition: Used machine Normal signs of use Good technical condition Complete – as shown in the photos 📹 Video of machine operation available (WhatsApp) 🚚 Transport: Possible shipping on a pallet Personal collection Assistance with organizing transport available

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm Rodpfx Aoyaq Nhoizot - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland Redpfeyardmox Aizst – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm Rjdpfxoyi Tn Ss Aizjt - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Scope of delivery includes: 01x CS profile, used Material color: Sendzimir galvanized Total length: 5,550 mm Rjdpfx Aox R Ambjizet Profile dimensions: CS 250 x 50 x 40 mm Weight per piece: approx. 45.00 kg Material thickness: approx. 2.5 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should you require transport or shipping, additional costs will apply. These can be quoted separately depending on the delivery location and scope of supply.

Condition: new, ///// PRICE PER UNIT ///// For sale: professional submersible pump KSB AmaDrainer B 80-40 S – high-quality device designed for operation in demanding conditions (dirty water, sewage, drainage). ✔️ Condition: NEW ✔️ The pump has never been used ✔️ Original packaging / wrapping / documentation ✔️ The set includes cable + float switch + controller ⚙️ Technical data: Manufacturer: KSB (Germany) Model: AmaDrainer B 80-40 S Power: 4.0 kW Supply: 400V / 3~ / 50 Hz Current: 8.5 A Protection class: IP68 Capacity: up to 100 m³/h Rotation speed: 2800 rpm Insulation class: B Max. liquid temperature: 40°C Weight: approx. 65 kg ✅ Applications: construction dewatering pumping stations sewage and dirty water industry wells and tanks Rsdpey Abr Hofx Aizet 📦 Set includes: ✔️ KSB pump ✔️ Power cable ✔️ Float switch ✔️ Documentation ✔️ Original packaging

Condition: excellent (used), I am offering a circulation pump from the renowned brand WILO, model TOP-E 40/1-10, equipped with electronic control. The pump is intended for heating systems, HVAC, and industrial applications. It features an electronic module with a display and operation adjustment, which allows for the optimisation of energy consumption and performance. 🔧 Technical data: Manufacturer: WILO Model: TOP-E 40/1-10 Power supply: 230V / 50 Hz Type: electronic circulation pump Connection diameter: DN40 (approx. 40 mm) Insulation class: F Rsdpfx Ajy Abf Hsizst Degree of protection: IP43 Pressure: PN6 Medium temperature: up to 110°C Rotation speed: 850 – 2850 rpm Power: 30 – 570 W Current: 0.45 – 4.80 A 📦 Condition: Used item. Shows normal signs of use but is in good technical condition and fully functional. 📌 Additional information: Electronic operation regulation High-quality workmanship – made in the EU Ideal for central heating, industrial, and circulation systems Robust construction

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Rjdpfsy Ah Ibjx Aizjt Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: excellent (used), For sale: Becker VT 4.40 vacuum pump – a high-quality unit from the renowned German manufacturer Becker. This pump is ideal for industrial applications, CNC machinery, vacuum packaging, and automation. ⚙️ Technical data: Manufacturer: Becker Model: VT 4.40 Year of manufacture: 2009 Capacity: 40 / 48 m³/h Redpfx Aijyz Dy Dozst Power: 1.25 / 1.50 kW Speed: 1420 / 1700 rpm Frequency: 50 / 60 Hz Max. vacuum: 150 mbar Country of manufacture: Germany 🛠️ Features: Oil-free (dry-running) vacuum pump Quiet and efficient operation Compact design Low operating costs Very popular model in the industry 📦 Condition: ✔️ Used ✔️ Very good visual condition ✔️ Normal signs of use ✔️ Ready for operation 📌 Applications: CNC machinery vacuum packaging woodworking industry automation suction systems 📦 Included: Becker VT 4.40 pump as shown in the photos 🚚 Shipping: Courier or pallet shipping possible Personal collection also possible Assistance with transport organization available

Condition: excellent (used), I offer a professional vacuum pump from the renowned German manufacturer Becker, model VT 4.40. This device is designed for industrial use and is characterized by high reliability and maintenance-free operation. The pump features oil-free (dry-running) technology, which means it does not require oil and minimizes operating costs. Ideal for applications where cleanliness and stable vacuum are required. The visual condition is very good. The device is complete. Technical data: Rsdpfxoyxgt Ie Aizot Manufacturer: Becker, Germany Model: VT 4.40 Year of manufacture: 2007 Capacity: approx. 40 m3/h at 50 Hz Vacuum: up to approx. 150 mbar absolute Motor power: approx. 1.25 kW Power supply: three-phase Speed: approx. 1420–1700 rpm Weight: approx. 38–40 kg Applications: CNC machines and vacuum tables vacuum packaging wood industry printing and graphic arts material handling Advantages: oil-free operation – no oil service required quiet and stable performance robust industrial construction long vane life Made in Germany