Used Paint And Drying System for sale (45,253)

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Rcedpfxoy Tiaas Alaof Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Rodpfeun R Ufjx Alajcf Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that convinces! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping possible upon request ⏰ 48-hour EXPRESS DELIVERY possible after down payment! The standard delivery time varies depending on stock levels between 1 working day and approximately 15 weeks. 🔧 Please note: Additional options can extend the delivery time. 📩 Ask the seller in advance whether your chosen options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire purchase ✔️ Leasing ✔️ Warranty programs 📞 Contact us – we will find the best solution for your budget! Rodpfx Alsipvuleaecf ✨ Strong. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three most common cabin sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard cabins in a modular way to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-class wet spray booth & drying system 📐 Technical data (internal / external): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air handling unit: 1350 x 2900 mm 🔧 Performance features: 🌬️ Vertical airflow over a full-surface ceiling air supply plenum – for even, dust-free painting 🚪 3-panel main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – fast heating to 60–80 °C in 8–15 minutes 🔇 Low-noise, high-performance fan with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99 % High-temperature heat exchanger made of special steel 🧼 Filter technology at the highest level: ✅ Pre-filter (tear-resistant, up to 100 °C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control over ventilation, heating, lighting and safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Air handling units can be flexibly positioned – can be mounted to the right, left or rear of the cabin ➕ Optional equipment (at extra cost): 🪟 Panoramic door – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Ex-protected lighting (Exproof) 🌪️ Ex-protected fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ The choice of special equipment can extend the delivery time. Please agree on your options with our sales team in advance. 🚧 Assembly costs are not included in the price. 📍 These depend on your location – we will gladly prepare an individual offer for you! ☀️ 2 YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Condition: good (used), 1 x Weighing and Bagging System Comprising of: - Rcedpfx Aszgc H Dslajf VFFS Bagger, 10 head multihead weigher, bucket elevator, outfeed conveyor, ICE printer, gantry rails on 3 sides. Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Beg length 50-280mm Power supply 3 phase .375kw Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase Rsdpoya Hvqefx Alajcf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Rcedpfx Aloxu Upmeaef Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Rjdpfx Alezunvasascf Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Rcjdezvxxnspfx Alaof Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Rsdpfxozvxvao Alajcf Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Rcedpfszvgiujx Alasf Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. Rcedjzwvb Aepfx Alajf System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, 30:1 pump ratio, IS, AA, from our demonstration stock. Manufacturer: Graco Rsdpfozwk H Hex Alascf Designation: PROMIX 2KE, 30:1 pump ratio, IS, AA Article No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. This is a great opportunity to acquire a proven, little-used Graco system at attractive conditions. We will be happy to assist you with any questions.

Condition: new, functionality: fully functional, machine/vehicle number: G36W05, overall weight: 39 kg, operating pressure: 248 bar, compressed air connection: 7 bar, 36:1 Merkur pump: - Wall-mounted Rcjdezwb Nrspfx Alaof - Includes suction hose, material filter - Permissible material operating pressure: 248 bar - Max. material flow rate: 6 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you.

Condition: new, functionality: fully functional, machine/vehicle number: G30W55, overall weight: 34 kg, operating pressure: 207 bar, compressed air connection: 7 bar, 30:1 Merkur pump: - Wall-mounted - Includes suction hose, material filter Redpfxezwb Hwo Alascf - Permissible material operating pressure: 207 bar - Max. material flow rate: 4.5 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you.

Condition: new, Year of construction: 2026, Equipment: cabin, Painting/Spraying Booth The Reinox 300x140 professional painting/spraying booth is designed for partial painting and spraying in production facilities where controlled filtration and safety measures are required in environments with explosive materials (ATEX). Thanks to its powerful extraction system and three-stage filtration, a clean working environment is ensured even during intensive operation. De Dsia Ta Hskryqzeci !! This is always a new machine (photo from customer installations). We are the manufacturer. !! Technical specifications: - Fan is certified for ATEX zone 22 - Extraction area: 3,000 x 1,400 mm Rcedpszkfnrefx Alajf - Power supply: 400 V / three-phase - Control: frequency inverter – stepless power control via a potentiometer on the control panel. - Filtration: three-stage filter Certifications & documentation: CE, ATEX, complete technical documentation Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us.

Condition: new, functionality: fully functional, machine/vehicle number: G30C25, overall weight: 33 kg, operating pressure: 207 bar, compressed air connection: 7 bar, Air-assisted 30:1 Merkur complete system: - Incl. Airmix gun PerformAA 50 - Chassis mounting Rcsdpfx Aezv S T Eslaef - Incl. gun-air-material hose, material filter - Permissible material operating pressure: 207 bar - Max. air inlet pressure: 7 bar - Max. material flow rate: 1.5 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you.

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Rcedpot Uircsfx Alaef Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: refurbished (used), Year of construction: 2020, Dear customers, To ensure a fast and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This allows us to directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! Redpfxsfr T Eqo Alaocf TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Transition from square to round: 150 EUR net Paint stop filter mat clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Clamping bar (+€180.00 net) Options/additional cost for: Paintstop filter mat clamping bar: €180.00 net Side guide plates with hinge: €590.00 net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us. Rcsdpfx Alofn Nddsaef

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Clamping rail (+ EUR 150.00 net) Options/additional cost for: Redpofn Ndcsfx Alaecf Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWa 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan mounted above the wall + Fan height adjustment Airflow: 7,200 m³ / h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 Ø mm Depth: 900 mm The piping should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Paint stop filter mat with clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. Rodpfefv Hiqsx Alaocf We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear Customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWi 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Airflow: 10,800 m³/h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Rjdpsfr T Emsfx Alajcf Paint stop filter mat Clamping rail (+180.00 EUR net) Options/Additional cost for: Transition from square to round: 150.00 EUR net Paint stop filter mat clamping rail: 180.00 EUR net Side guide plates with hinges: 590.00 EUR net Images may vary. We would also be happy to offer you complete spray booths with air supply system, heat exchanger, air supply ceiling, piping, etc. Simply contact us.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3514, functionality: fully functional, power: 25 kW (33.99 HP), input voltage: 400 V, total length: 5,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 3,000 kg, KOCH CKT-300 Granulate Drying System - including piping and 6 associated containers Note: The item must be picked up on a fixed date between September 1st and September 3rd, 2026; the exact date will be confirmed. Rodjzvl H Sopfx Alajcf FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: used, Year of construction: 2009, Painting system The system consists of: SORBINI Smartcoater SP1 paint roller coating machine, year of manufacture 2009, approximately 3000 operating hours Roller coating and puttying machine Technical data - Working speed: 5-20 m/min - Workpiece width: max. 1350 mm - Workpiece thickness: max. 100 mm Redpfezuzrhex Alascf UV lamp control cabinet UV lamps SUPERFICI Model 2UVPLUS65, year of manufacture 1998, on a VENJAKOB conveyor belt, year of manufacture 1998, average number of operating hours 8500 Working area 1.5 - 7.5 m/min. Max. element width 1300 mm Dimensions (length x width) Lamps with conveyor belt: 5100 mm x 1700 mm (+ 600 mm motors) Rollers: 2200 mm x 2900 mm Control cabinet for UV lamp: 2000 mm x 800 mm Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Redpjzuzqdjfx Alajcf Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.