Used Pama Vertical Milling Head for sale (22,229)

Condition: excellent (used), 1 used, partially overhauled vertical milling head with large overhang suitable for drilling machines manufactured by PAMA (origin: Italy) or other manufacturers Ndsdpfez Euydjx Agrob Spindle mount: SK 50 Overhang: 660 mm Flange size: 465 x 440 mm Inner bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions L x W x H: 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Stepless angle adjustment, manual • 4 fixed indexing points, each 90°, with dowel pins • Tool clamping with tightening rod • For retrofitting to conventional, NC or CNC milling machines or drilling machines of any type, L-R pivoting, manual tool clamping, … The following partial overhaul was performed: - Grinding of the SK 50 tool mount on the milling spindle - Replacement of the bearings in the milling spindle - New shaft seals Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Ndjdpfx Aou N E Abjgrsb *

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Ndodpfx Agexf Ur Njrob

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Nedpfxsxddwre Agrsdb Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: new, 1 brand-new 90° vertical milling head for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, with L-R swivel function, manual tool clamping. Technical data: Spindle mounting: ISO 50 Designed drive power: 22 kW Maximum speed: 3000 rpm Overhang: 350 mm Arbor support: Ø 180 mm Outer diameter of mounting surface: Ø 306 mm Head height: 441 mm Weight: 115 kg Accessories / Special features: • Manual tool clamping • The main spindle and all shafts and components are made of case-hardened and tempered chrome-nickel steel • 1 rotatable axis (left/right) • Ground gears • The rolling bearings of the main spindle consist of tapered high-precision rollers • Tool clamping with draw rod Delivery time: approx. 12-14 weeks after order receipt Ndodpfjz Dqx Tex Agrob Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm Ndodjv U I Slopfx Agrob *

Condition: used, Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Nodpju Nlgyofx Agredb Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head *

Condition: used, Keyway milling head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is the same as for the standard vertical head, driven by the machine gearbox - Drive via a drive pin, centered within the centering diameter - Graduated scale on the flange plate, +/- 45° infinitely adjustable - This keyway milling head is flanged in place of the standard vertical milling head Nedpfed Dk A Ajx Agredb (Mounting in place of the vertical milling head) Weight: 42 kg Good condition Keyway milling head, bearing number 58166, and vertical milling head, bearing number 58164, from an identical STANKO milling machine.

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° Ndjdpfx Agoznn Hrerob - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: like new (used), 1 unused universal vertical milling head, suitable for an ORADEA / EURO-MILL FUS 32 Nedpfxjddtwbs Agrjdb Design: “MAHO”, ISO 40 shank, quill stroke 100 mm, designed drive power approx. 3-4 kW, max. speed 2000 rpm, … Optional accessories: - Multiplier, gear ratio 1:4, ISO 40 shank Price: EUR 499.00 - Attachment for automatic feed device for the vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: EUR 1,880.00 - Cross milling head, additional head for the vertical milling head with spindle taper ISO 30, rotatable, 360 degrees Price: EUR 585.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 46,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D, table load: 25,000 kg, number of slots in tool magazine: 60, number of axes: 4, This 4-axis PAMA Speedram 1000 was manufactured in 2004. It features an impressive X-axis travel of 12,000 mm, Y-axis travel of 4,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust spindle diameter of 160 mm and a maximum spindle speed of 3,000 rpm. If you are looking to get high-quality milling capabilities, consider the PAMA Speedram 1000 mill-turn centre we have for sale. Contact us for further details. • W-axis travel: 700 mm • Spindle orientation: Horizontal • Spindle diameter: 160 mm • Spindle torque: 2,300 Nm • Ram section: 360 × 400 mm • Rapid traverse X/Z: 25,000 mm/min • Rapid traverse Y: 15,000 mm/min (20,000 mm/min possible) • Rapid traverse W: 20,000 mm/min • Tool cone: BT 50 BIG-PLUS • Operator pendant: Motorized Additional equipment Nsdpfxez D Dlgs Agrjdb • Chip conveyor • Coolant through spindle: 15 l/min, 25 bar • External coolant: 50 l/min, 4 bar • Vertical fixed head TS 20 M: 30 kW, 2,500 rpm • TG4 retractable table: 2,000–3,000 mm, 25,000 kg load

Condition: used, Vertical Milling Machine Droop & Rein type FS130 Travel X: 2000 mm Travel Y: 1000 mm Travel Z: 1000 mm Spindle SA 50 Nedpfozw D R Sjx Agredb Sensitive spindle exit: 200 mm Rotation: from 31,5 to 1600 RPM Table size: 2400 x 1070 mm Throat depth: 950 mm Tilt head Spindle motor: 22 kW Scale HEIDENHAIN 3 axes Year of construction: 1976 New electrical panel in 2006 Voltage : 380 V Width : 3500 mm Depth : 4700 mm Total height : 4500 mm Weight : 26 T

Condition: excellent (used), Year of construction: 2018, operating hours: 9,219 h, functionality: fully functional, machine/vehicle number: 2730218, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhaim, controller model: HAIDENAIN TNC 530 HSC, total height: 4,070 mm, total length: 6,800 mm, total width: 6,500 mm, table width: 1,300 mm, table length: 1,800 mm, table load: 6,000 kg, overall weight: 19,000 kg, spindle speed (max.): 3,500 rpm, operating hours of spindle: 9,219 h, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MACHINE FEATURES Model: RTX 25 TG130 Serial Number: 2730218 RTX Series Features Structure: Fixed bed and moving column. Movements: Longitudinal table and transverse column with constant support. Rotary Table: Replaces the fixed rectangular version for continuous machining operations. Head: Bi-rotational head as standard for maximum flexibility. Type: Universal milling machine with fixed bed. Applications: Precision mechanical machining and complex profiles. Construction: Designed and assembled in Turin by Goglio Milling Systems. Travels Longitudinal Travel (X-axis) 2500 RCV UL1007 Transverse Travel (Y-axis) 1700 RCV UL1007 Vertical Travel (Z-axis) 1500 RCV UL0714 Rotary Table TG-130_1300x1800 Spindle Motor Power 24 kW Maximum Spindle Speed 3500 rpm Rapid Traverse Rate X-axis (CNC) 15,000 mm/min Rapid Traverse Rate Y-Z axis (CNC) 15,000 mm/min Rapid Traverse Rate Axes (Manual) 6,000 mm/min Working Feed Rate (CNC) 10,000 mm/min Working Feed Rate (Manual) 2,500 mm/min Continuous Torque Motors X-Y Axis 36 Nm Continuous Torque Motors Z Axis 36 Nm Tool Holder Electro-hydraulic Spindle Taper ISO 50, Tool Drawbar BIR 200 Maximum Permissible Load on the Table 6,000 kg Bi-rotational Head Continuous for B-axis 0 - 360° Module Rotary Table Coupled to Hydraulic Rotating C-axis 0 - 360° continuous Machine Chiller Yes Tool Magazine 32 Positions Nodpoyn Rdusfx Agrsdb Operating Temperature 10-40 degrees C Base Machine Mass 19000 Kg CNC HEIDENHAIN TNC 530 HSCI

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). Njdpfjzvp E Eex Agrodb With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Ndsdpfx Agjxk Tzgereb

Condition: used, Universal milling machine, console milling machine SIMPLON Type UN-S / Universa-Super Machine No.: 17220 Year of manufacture: 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm, 16 steps Feed rate X, Y, Z axis 11 - 500 mm/min Rapid traverse 2400 mm/min Main spindle motor power 4 kW Connection voltage 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, Type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Clockwise and counterclockwise rotation of the milling spindle - Vertical milling head, swiveling +/- 90° - Overarm from the milling head, manually adjustable 700 mm - Side, manually extendable counter bearing mount with dovetail guide 450 mm - Mechanical tool clamping with tightening screw M16 - Coolant system in the machine base - Electrical control cabinet on the machine Njdpjifu Arofx Agrodb Space required L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: used, Vertical milling machine CINCINNATI 2 MI Travel X: 700 mm Travel Y: 250 mm Travel Z: 330 mm Spindle: SA 50 Spindle speed: from 25 to 1500 RPM Table size: 1380 x 250 mm Slide spindle travel 100 mm Motor 5 CV Feeds auto X - Y Manual head descent (auto not working) Voltage: 380 V Nsdpfx Aszw D Ecsgrsdb Width: 1800 mm Depth: 1800 mm Total height: 2000 mm Weight: approx 2,5 T

Condition: used, Year of construction: 1995, x-travel 650 mm Nsdpfx Agjzz S R Ujrjdb y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Njdpfxjz Ek D Ss Agrjdb Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Ndedpfx Aezlar Ujgrjb Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: used, Year of construction: 2015, control SIEMENS - 840 D - - - - - - - - - - - - - - - - - - 5-axis simultaneous machining center | SPINNER - U 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. Ndodpfsz Dxrzjx Agrjb The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U620| U-620

Condition: excellent (used), Universal Vertical Milling Head This milling head was previously used on a Union TC130 table-type boring mill and is compatible with many other machines. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, as well as control system upgrades. Services: - Used machinery - Spare parts - Customer service - Machine maintenance Nodeylg R Eepfx Agrjdb - Machine overhauls - Control system modernization

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting Njdpfx Aozz Afijgrjdb conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Ndodpfx Agoyahv Sjrjb Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. Ndedpoy E Tv Ajfx Agrsb - Backup package for power outages - DXF import