Used Paolo Orizio Single-Sided Circular 30'' 20E 96 Feed. for sale (55,056)

Condition: used, functionality: limited functionality, machine/vehicle number: 11862780, Paolo Orizio S.p.A. single-sided circular knitting machine, model FI-HN, machine number 11862780. Made in Italy. NAMEPLATE DATA · Diameter: 30 inches · Gauge: 20 · Number of needles: 1860 · Number of feeders: 96 · Cylinder number: 1860253 · Needles: VO 15752 T02 / T03 / T04 · Sinkers: 209225000 · No CE marking 96 FEEDERS With 96 feeders in 30 inches, this machine has the highest feeder density in the lot. For the same diameter and gauge, a higher number of feeders translates into more production per revolution. APPLICATION Single-sided knitted fabric: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT · Warning panel: network connected, warnings, lighting, Rosen units, open door warning · Two-row counter with preselection · Complete upper fillet LUBRICATION Oils indicated on the nameplate: IP Mellana 150 / Shell Full IP Gear Oil 72 for parts lubricated with oil and the variator; IP Athesia Grease EP2 / Shell Alvania EP2 for greased parts; IP Feltria 46 / Shell Vexilla 6 for needles and sinkers. CONDITION Machine partially disassembled: the cam plate and sinker ring are accessible without covers. Sold as is. An on-site inspection visit can be arranged. Gsdpjzvm Nbsfx Afuskc DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 109116063, Paolo Orizio S.p.A. single-sided circular knitting machine, model JSV-R, machine number 109116063. Made in Italy. MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1856 · Number of feeders: 44 · Cylinder number: 22101088 · Needles: VO 12362 G02 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION: Single-sided knit fabrics: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. Gkedpfezvm Ukox Afuec EQUIPMENT INSTALLED: · Orizio control panel with counter and pre-selection · Labeled indicator light panel · IG455 tachometer · UNIWAVE mist lubricator with pressure gauge and regulator · Drive with stepped pulleys · Complete upper fileta · Hour meter LUBRICATION: Oils specified on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION: Complete and assembled machine. A visit can be arranged for inspection and on-site operating test. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 108813364, Single-sided circular knitting machine by Paolo Orizio S.p.A., model JO/5, machine number 108813364. Made in Italy. Gkodpfx Afezvh Swsusc PLATE DATA · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1860 · Number of feeders: 72 · Cylinder number: 04871290 · Needles: VO 15752 T02SA / T03SA / T04SA · Sinkers: L7 22601 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION Single-sided knitted fabric with 72 feeders: plain jersey, pique, fleece and derivatives for outerwear, sportswear and underwear. INSTALLED EQUIPMENT · Orizio MPF positive feeding system · Hole detector · Needle detector · Revolution counter and pre-selection · Open door warning · UNIWAVE mist lubricator · Complete upper butt · Fabric take-up with upper fan INCLUDED OPTIONS The machine panel indicates MPF-UNITS included and ROSEN-UNITS / HOLE-DETECTOR included. LUBRICATION Oil recommended on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 988, Jumberca SYX2 single-jersey circular knitting machine, machine number 988, year 1990. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). Gkodpfxezvh Eqj Afujc MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Plate date: 04/25/1990 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single-jersey knitted fabric: plain jersey, pique, and fabrics for outerwear, sportswear, and underwear. INSTALLED EQUIPMENT: · Memminger-IRO LMW 3 yarn control unit · Electrical panel with LOYJE 13.220 transformers and ABB / BBC thermal-magnetic circuit breakers · Transformer with 200, 220, 380, 415, and 440 V taps · Stepped pulley drive · Complete top sinker plate · Emergency stop button NEEDLES: Groz-Beckert Vota 76.48 G09 cylinder needles and SNK 42.37-24 G2 sinkers. Internal set reference: SK 20 5719 001/00. POWER SUPPLY VOLTAGE: The transformer has taps for 200, 220, 380, 415, and 440 V, allowing the machine to be adapted to different power supply networks. CONDITION: Complete and assembled machine. Electrical panel accessible and photographed. A visit can be arranged for on-site inspection and operational testing. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 102, Jumberca SJM-3 single-sided circular knitting machine, machine number 102. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA: Diameter: 30 inches, Gauge: GG 24, Number of needles: 2304, Manufacturer: Jumberca S.A., Badalona, Made in Spain, No CE marking. APPLICATION: Single-sided knitted fabric in fine gauge: shirts, underwear, nightwear, and lightweight outerwear. Gksdpfx Aszvphtsfuoc FREQUENCY CONVERTER: The machine is equipped with a 400 V Toshiba frequency converter mounted on the control column, with electronic speed regulation. INSTALLED EQUIPMENT: Toshiba 400 V frequency converter, Kübler hour meter and counter, Jumberca panel with eight indicator lights, main switch, Square D control panel with start, stop, and emergency stop buttons, Memminger-IRO Pulsonic 3 Mini lubricator, complete upper cam, fabric take-up system with chains and sprockets. CONDITION: Complete and assembled machine, currently protected with film for storage. Fabric from the last production run remains in the machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: Approximate dimensions: length 2.70 m, width 2.00 m, height 2.70 m. No disassembly required. Location: Albacete, Spain.

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. Gkjdpfx Afozvh D Hsusc DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 186, Single jersey circular knitting machine, Jumberca model SLM 3. Made in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single jersey knitting: plain jersey, piqué, and fabrics for outerwear, sportswear, and underwear. FOUR-TRACK CYLINDER: Groz-Beckert Vo-Ls 136.52 cylinder needles in all four positions G001, G002, G003, and G004. Internal set reference SK 20 5727 001/00. A four-track cylinder expands the range of structures the machine can produce compared to a two- or three-track cylinder. EQUIPMENT FITTED · Control cabinet with indicator panel · Kübler counter · Separate main motor · Complete top creel · Gear-driven fabric take-down Gsdpfx Aszvh R Hjfuskc IDENTIFICATION · Stamped frame number: 209622001 · Dealer: SECONTEX / TEX-ROY S.L., Sta. Agnès de Malanyanes (Barcelona) CONDITION: Machine complete and assembled. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No dismantling required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. Gedpfozvhx Rjx Afuskc YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. Godpfx Aszvn S Rsfuokc EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1024610, Paolo Orizio S.p.A. small-diameter circular knitting machine, model TBE/C, machine number 1024610, year 1999. Made in Italy. CE marked. ORIZIO PLATE DATA: · Diameter: 15 inches · Needles per inch: 24 · Number of needles: 1120 · Number of feeders: 4 · Cylinder number: 3-9-286-A · Needles: VO 7950 G0011 · Year: 1999 · CE marking REBUILT BY CANMARTEX IN 2012. The machine has a second plate from CANMARTEX CATGRUP S.L. (Dosrius, Barcelona) with serial number OR610 and marking R2012, corresponding to its rebuilding in 2012. CANMARTEX manufactures circular knitting machines under the Jumberca brand and is located one hour from the current location, making technical service and spare parts still accessible. CANMARTEX PLATE DATA: · Power: 5.5 kW · Frequency: 50/60 Hz · CE marking ORIZIO ELECTRICAL PLATE DATA: · Line voltage: 380 V, 3 phases · Frequency: 50/60 Hz · Full-load current: 16 A · Breaking power: 260 A Gedpjzvm Dxsfx Afuskc APPLICATION: Small diameter with 4 feeders: cuffs, collars, ribbons, and finishing for knitted garments. POWER SUPPLY: 50/60 Hz. Both plates indicate 50/60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. EQUIPMENT: · Orizio touchscreen panel with "Yarn Storages" management · Igecom counter with USB port · Control column with start/stop buttons · Complete upper fillet LUBRICATION: Oil indicated on the plate: Optimol Optigear 5150 / Shell Omala 220. Oil change every 2,000 operating hours. CONDITION: Complete and assembled machine. A visit can be arranged for on-site inspection and operating test. DIMENSIONS AND TRANSPORT: · Location: Albacete, Spain.

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Gkodpfozvu Ekjx Afuec Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Gkodpsz Nyp Hefx Afuec Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above Gkedpfxszuykve Afuoc with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Gkjdpfx Afey Spclsuoc Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Gkjdpfx Afozku Rpousc Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Gsdpfxjz Ebznj Afuskc ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2008, This HOMAG single-sided edge banding machine, type: Optimat KAL210/6/A20/S2, is being auctioned online as part of our industrial auction / machinery auction for woodworking machines - edge banding machine - destacking system - vacuum press - veneer shear - membrane press. Gkedez Ndxyspfx Afusc You can find this and many other items on our platform.

Condition: new, Year of construction: 2023, machine/vehicle number: 15562, type of input current: three-phase, overall weight: 900 kg, input voltage: 400 V, operating pressure: 7 bar, input frequency: 50 Hz, Single-sided drilling and dowel insertion machine Omal Velox 1300, manufactured in 2023. Equipped with a glue gun sensor and a laser measuring device. Gjdpfxez Ngkdj Afuokc

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Gedpfozuyp Eox Afujkc Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Gjdjm Udfwspfx Afujkc Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: excellent (used), CATALOGUE NUMBER: 7915 TECHNICAL SPECIFICATIONS: Shaft width: 640mm Number of knives: 4 pcs Maximum thickness of the workpiece: 200mm – Top: Latches/deflectors Toothed infeed roller, pulling Pressure roller Planing roller Pressure roller Smooth outfeed roller, pulling – Bottom: Adjustable rollers in the lower bed: 2 pcs Motor: 7kW Infinitely variable feed speed control Dimensions (L/W/H): 1800x1250x1150mm Weight: 1250kg ADVANTAGES: – Bulgarian production – Infinitely variable feed speed control – Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR Gksdpfszrltqjx Afuoc (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Gedpfxezuyhno Afujkc Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application Godez Ikq Dspfx Afuekc - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Gkedoyk Tkvopfx Afuec Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), "SOFTFORMING" LEFT-side SINGLE-SIDE SIZING and EDGE BANDING Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control / Software PC 22 / WoodCommander Adjustable feeding speed (m/min ) 10 - 40 Working line (work units support tables), manual adjustment mm 30 - 80 SIZING PART: Spraying unit (Anti-sticking liquid) Double Hogging Units KD 10 (2 x Kw 6,6) Fine Trimming unit for softforming (2 x Kw 1,85) 0°-20° Gksdpfjt N H Tasx Afujc Belt sanding unit (abrasive papers) for straight edge KS 10(mm 120 x 2100) Free space mm 700 EDGE-BANDING PART: Glueing Unit (Hot Melt + Quick Melt Unit) E34 softforming Pressing rollers (revolver) both for straight and shaped edges (softforming) G (4 stations) With top and bottom rolling knives (In-lay) Edge coils supporting unit E3 (No. 6 of reels) Snipping (end-cutting) unit HL 84 (2 x kW 0,8) 0°-30° (max 25 m/min) 1st Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic 2nd Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic Milling grooving unit UF11 (1 x kW 4) 0°-90° Profile Scraping unit PN20 (Pneumatic adjustment) Finish processing unit (Glue scraper + Buffing unit) FA11