Used Pavan P 400 for sale (53,003)

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta Gbedpfx Ajh Dxgaeagsn - Metal Detector - Automatic packing unit

Year of construction: 1993, condition: like new (used), Long line: - capacity 350 kg / h - mixer - dispenser, water / flour, horizontal - snail, snail - Press - Vibro dispenser, reconditioned in 2010 - First dryer, reconditioned 2010 - Secound dryer - Possible accumulation of pasta in 8 hours Godpjh Dxhfsfx Aagobn - two dry tapes - two strips for dried pasta - Metal Detector - Comand pult - El. Cabinet - Autoatic packing unit ( 2012 )

Year of construction: 1990, condition: good (used), Short/ Nest Line Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult Gjdpfx Aaon Arzkogobn 13. El Cabinet 14. Automatic packing Unit

Condition: good (used), Year of construction: 1994, Short/ Nest Line Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) Gbsdpfx Ajh Dxgzjagsn 11. Trans, strip of finished product 12. Comand pult 13. El Cabinetsž NOTE - Action price - 30.000 EUR

Condition: reconditioned (used), Year of construction: 2017, J&P casepacker KVKF 400, 2017 Gbodpfx Aohtfc Ijagon This J+P casepacker is designed for the automatic packaging of products into various types of cardboard packaging. The machine handles the following packaging formats, among others: American case closed American case open Open trays

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Gedpszcwi Hjfx Aagobn Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, mileage: 799,039 km, power: 294 kW (399.73 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 12,055 kg, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, Equipment: air conditioning, , Manufacturer: Scania - Type/Model: P 400 LB6X2 - First registered: 16.02.2010 - Mileage: 799,039 km - Number of axles: 3 - Emissions class: Euro5 - Gearbox: Manual transmission - Suspension: Leaf-air - Lift axle - Brake: Disc - Length: 8600 mm - Width: 2500 mm - Height: 3380 mm - Empty weight: 12055 kg - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 15000 L - Tank chambers: 1 - Baffles - Insulated - System designation: Impeller system - Impeller pump - MAK 3002 - CIP cleaning Gbedpfxov Awc No Aagsn

Condition: used, mileage: 400,000 km, power: 294 kW (399.73 HP), first registration: 08/2014, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, loading space length: 5,900 mm, loading space width: 2,350 mm, loading space height: 900 mm, Year of construction: 2014, Equipment: ABS, air conditioning, crane, Scania P 400 / 8x4 TIPPER 5,90 m + BORDMATIC Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 400 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ?POWER STEERING ? TACHOGRAPH CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg WHEELBASE: 195/235/138 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Gbsdevi Durjpfx Aagon LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 76474

Condition: used, mileage: 372,000 km, power: 294 kW (399.73 HP), first registration: 08/2015, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, Year of construction: 2015, Equipment: ABS, air conditioning, Scania P 400 / 8x4 TIPPER Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 372 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ? POWER STEERING ? TACHOGRAPH CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg WHEELBASE: 195/240/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Gjdpfjv Sn Sasx Aagjbn RADEK - ????? Ref. nr: 83247

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m Gbedpfx Aogf H Sasagon

Condition: used, functionality: fully functional, Year of construction: 2021, total height: 4,254 mm, total length: 15,500 mm, total width: 4,400 mm, load capacity: 1,600 kg, Professional crane system P 400 with chain hoist type SIXX 8AF-HF, load capacity: 1600 kg, lifting height 5 m. All technical specifications can be found in the technical documentation (see PDF). An advantage is that the crane can be easily extended thanks to its modular design. IMPORTANT: The crane system comes without travel drives!!!! Gjdpfx Aoxyhmceagsbn

Condition: used, mileage: 589,000 km, power: 294 kW (399.73 HP), first registration: 01/2011, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, loading space length: 4,900 mm, loading space width: 2,460 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: ABS, air conditioning, SCANIA P 400 / 4x2 Tipper 4,90 m + CRANE + REMOTE CONTRROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? MILAGE: 589 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ?AIRCONDITION TIPPER: 490 x 246 x 60 cm (L x W x H) CAPACITY: 8 000 kg TOTAL WEIGHT: 19 000kg TIRE SIZE: 13R22,5 WHEELBASE: 390 cm SUSPENSION: SPRING CRANE: FASSI F110A.23 + REMOTE CONTROL TEL: Gbedpfxezah Eyj Aagjn * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 51796

Condition: new, machine/vehicle number: 55d3c5c03e032385649769b1b, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box recessed in Incl. Turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 3 pairs of lashing points, 10 tons each, integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x to the neck area remaining distributed in between Spacing not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Towing equipment Trailer turntable Drawbar with tested 40 mm towing eye Please note! With 40 mm drawbar eye, the maximum permissible total weight of the truck is 18000 kg, otherwise 50 mm drawbar eye required. Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front Gjdpfei Ri I Ejx Aagjbn 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, then with 70 mm softwood floor, steel/checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring jack support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany 1 with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame Ral 3002 carmine red 10-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: good (used), Description: The machine is in good technical condition; testing is possible by prior agreement. Application: production of gears (spur gears, helical gears, shafts) CAPACITY Max. gear diameter: approx. 400 mm Max. module: typically 6–8 (sometimes up to 10 for newer versions) Max. gear width: approx. 275–400 mm SPINDLE AND TOOL Cutter speed: up to approx. 500 rpm Tool diameter: approx. 160–240 mm Motor power: approx. 15–17 kW TABLE Table diameter: approx. 380–400 mm Table bore: approx. 80 mm Load capacity: up to approx. 1000 kg DIMENSIONS AND WEIGHT Gsdsy Amiqopfx Aagsbn Length: approx. 4680 mm Width: approx. 2395 mm Height: approx. 2515 mm Weight: approx. 5–6.5 t (standard version)

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW Gedpfx Aaexl E Syogjbn weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: used, Year of construction: 1986, x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 600 x 300 mm quill stroke 50 mm spindle taper ISO 40 spindle turning speed range 50-400 , 400 - 3150 U/min CNC-control TNC 135 voltage 380 V / 50 Hz feeds X+Z = 5 -1000 mm/min rapid traverse X+Z = 2,4 m/min feeds Y = 5 -670 mm/min rapid traverse feeds Y = 1,6 m/min measuring system resolution capability 0,005 mm total power requirement 3,7 kW weight of the machine ca. 0,9 t Gbedpfxjxc Nwnj Aagsn dimensions of the machine ca. 1,9 x 1,8 x 1,70 m • HEIDENHAIN TNC 135 control,

Year of construction: 1996, condition: good (used), Width 400 mm Gbsdpfxjxl Sywe Aagon In production

Condition: good (used), We offer you here a used shelf connector of the manufacturer Mecalux for sale. Technical data of the shelf connector: Manufacturer: Mecalux Included in delivery: 01x shelf connector used material colour: sendzimir galvanized Gbodpfx Ajd Ttzhjagon shelf distance: approx. 400 mm profile height: approx. 80 mm Weight/pc: approx. 0.704 kg/pc. 04x hexagon head screws, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8

Condition: good (used), The scope of delivery includes: 01x U- collision protection, used material color: yellow Godpfx Aon R Edmeagebn total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm base plate dim.: approx. 200 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm Gbodpon R Egzsfx Aagsn profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB Godpfxeyhhmgo Aagsbn • Model / Type: RIO50-40D • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 • Power consumption (P1): 180 / 240 / 330 W • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment Godeyc H N Nepfx Aagebn • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Gbodpfoyv Inusx Aagon Technical data: Manufacturer: Siemens Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Mechanical size: 200L Mounting type: B3 Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Condition: excellent (used), For sale: Industrial electric motor by renowned manufacturer KSB Aktiengesellschaft. The motor is in good technical condition and fully operational. It features a robust construction and is designed for demanding industrial applications. Technical specifications: Manufacturer: KSB Type: 1LA7163-4AA66-ZX77 Power: 11 kW Supply: 3~ 400/690 V Frequency: 50 / 60 Hz Speed: 1460 rpm (50 Hz) Protection class: IP55 Insulation class: F Mounting: IM B35 (flange + feet) Cos φ: approx. 0.84 Weight: approx. 85 kg Gsdpfeyvi Hfjx Aagjbn Condition: Used Fully functional Normal signs of use (visible in the photos) Good condition

Year of construction: 1972, condition: used, functionality: fully functional, machine/vehicle number: TRFA12+14x, 1x Demag friction wheel drive travel drive for rope hoist crane hoist P-train bridge crane etc Stock from years of construction 1971 + 1976: 14x RF310 - motor type 16/6KF8-2 0,15-0,6KW 5m/25m/min price 2850.- / pc. 12x RF400 - motor type 19/11KF12-2/2 0,18-1,1KW 6,3m/40m/min Price 3650.- / pc. with 2 speeds Complete with tension clamps, motor/gearbox and friction wheel We can also overhaul defective, porous friction wheels for you and have new ones made - please enquire. Gbsdst Rtm Nopfx Aagsn Weight complete approx. 100-150 kg, connection to 380V 50Hz Used condition Item location is 75053 Gondelsheim See pictures