Used Pemal Dure for sale (3,524)

Year of construction: 1996, condition: excellent (used), Used machine Supply voltage ~ 3 x 400V Technically efficient Machine weight (kg) 515 Nlodpfxeidrd Se Aa Rof Dimensions L x W x H (mm) 1380 x 830 x 1460

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,503 h, load capacity: 6,000 kg, lifting height: 3,400 mm, construction height: 2,880 mm, fork length: 1,200 mm, The following items were renewed during the overhaul: new seat with seatbelt engine cleaned and dried forks in new condition new chains new hoses new hose reel new floor mat oil and filter change performed TECHNICAL DETAILS Nedozvuyzspfx Aa Rolf Load capacity: 6,000 kg Lifting height: 3,400 mm Overall height: 2,880 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Standard (2W340) Drive: 6-cylinder diesel engine Engine: Deutz TCD 4.1 L4 Dimensions & Weight Dimensions (L × W): 3,450 × 1,600 mm Dead weight: 11,250 kg Front tires: 355/65-15, 100% Rear tires: 250-15, 40% Operating hours: 6,503 h

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Nlodpjzr Iyysfx Aa Rsf Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Nlodpozwgxrjfx Aa Ref

Condition: used, Technical data: Nledpfx Aaex Eadwj Ref Max. length of sharpened knives: 600 mm Diameter of grinding wheel: 130 mm Manual feed Power supply: 380 V Total power: 0.55 kW Overall dimensions: Length: 1670 mm Width: 950 mm Height: 1600 mm

Condition: repair required (used), Year of construction: 2026, functionality: unexamined, machine/vehicle number: N110068, Cooking pot (damaged) Manufacturer: ELRO Type: JR2-140-EID-90 Details: see images for configuration The pot was dented in the area of a handle on the top and in the area of an outlet valve. The housing and the lid were visibly dented in these areas. There were abrasions and material fractures on a cover of the outlet valve. The handle also had scratches/abrasions. The shipment also included a steel frame, which had minor deformations/dents at various points. The damage was caused by mechanical forces during transport. Nlsdpfx Aezv Ru Iea Rjf The goods are sold on an "as is" basis, meaning "as is, where is".

Condition: excellent (used), - maximum length of sharpened knives 600mm - largest working travel of tool slide 660mm - the largest traverse of the cross slide 160mm - largest horizontal travel of the grinding head 140mm - rotation of the grinding head in the horizontal plane 360 degreesni Nedpfetn Rn Nex Aa Rolf - rotation of the grinding head in the vertical plane ± 30degrees - the largest vertical travel of the grinding head 240mm - has liquid cooling

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Nedpfxsxdn Nre Aa Relf Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Nedpfxezv Rhus Aa Rslf Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems 5 units with pre-filter, 2 units with turbine only Nljdpfszwlvcox Aa Rof The systems are sold as is, see pictures. The systems were fully functional until dismantling. The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). It can be used on all types of machine tools and in all machining processes. The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Nledpfx Ajzl Rqhoa Ref Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 Nedpfx Aszizkysa Rslf For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ Nodpfezvcknsx Aa Relf During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: excellent (used), Year of construction: 2025, KT 1880B Multifunction Safety Tester KT 1880B Multifunction Safety Tester – Automated Testing in a 6U Format The KT 1880B is a compact safety tester in a 19-inch rack-mount format (5U) that combines all relevant test types into a single unit: high-voltage testing (AC/DC), protective earth testing, insulation testing, equivalent leakage current testing, functional testing, and continuity testing. The KT 1880B thus meets the requirements for efficient, safe, and standards-compliant safety testing in accordance with IEC, EN, UL, VDE, and other international standards—making it ideal for final testing, production, and quality assurance. Technical Specifications - High-voltage test AC: 100 – 5,500 V / 0 – 3 mA - High-voltage test DC: 100 – 6,000 V / 0 – 10 mA - Insulation measurement DC: 100 – 6,000 V / 250 kΩ – 1 GΩ - Protective earth test AC: 10 – 30 A / 0 – 400 mΩ - Equivalent leakage current test AC: 100 – 270 V / 0 – 10 mA - Continuity test DC: 24 V / 0 – 600 mA - Functional test / Current consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-range power supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Use Thanks to its integrated 4.3" TFT color display, intuitive menu navigation, and freely configurable test programs, the KT 1880B enables fully automated test sequences. The device under test requires only a single connection—no need to switch cables. Nlodpfx Aezwlfwoa Rsf This significantly reduces testing times and potential sources of error, offering a distinct advantage, particularly in automated production environments. Compliance with Standards & Workplace Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the EN 50191 requirements for safety-current-limited devices. This allows it to be operated by non-specialist personnel—making it ideal for companies with mixed testing teams. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results—even during demanding test cycles and under production conditions. Typical Applications - Series production & final testing - Type testing according to international safety standards - Production of electrical devices, components, & assemblies - Automated testing environments & test benches A Combination of Flexibility, Safety, and Automation The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test modes, fully electronic high-voltage technology, intuitive operation, and a safety-current-limited design, it meets all the requirements for modern automated testing. SPS KT 1880B Safety Tester Year of manufacture: 2025 Manufacturer's price: €6,545 (gross) Calibration date: March 6, 2025 Remaining warranty included Accessories A3/1800-K Connection and control console + CEE16; manufacturer's price: €1,318 (gross) Knürr TW 05 equipment trolley, pre-assembled with: HL 02 Holder for high-voltage test pistols SP 02 / SP 03 HL 81 Holder for protective conductor test probe PE 81-i KH 01 Cable holder Manufacturer's price incl. accessories: €3,300 (gross) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Working travel of the slide 660 mm Travel of the cross slide 160 mm Vertical travel of the grinding head 240 cm Very good condition. Nlodpfx Ajmv Ea Eja Ref

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting width (max.): 2,270 mm, insertion depth: 9,510 mm, insertion height: 120 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 6,220 mm, input current: 32 A, total height: 2,000 mm, working width: 2,270 mm, total length: 11,510 mm, input voltage: 400 V, cutting height (max.): 110 mm, working height: 120 mm, input frequency: 50 Hz, Equipment: safety light barrier, The Zünd G3 XL-3200 is a professional digital cutting and routing machine with a working area of 2,270 x 3,200 mm and three module positions. The machine is suitable for both sheet and roll materials and features a conveyor for automatic material transport. The conveyor belt is in excellent condition. Maintenance performed by Zünd, last time on 17-08-2026. The material pass-through is 120 mm. With suitable tooling, materials up to 110 mm thick can be processed. This includes a POT Pneumatic Oscillating Tool with an 8 mm stroke and long 1.5 mm oscillating blades. This combination is suitable for cutting thick and soft materials. The machine features two UM-120 Universal Modules for various cutting, creasing, and marking tools, and an RM-120 routing module. The main tools are: UCT Universal Cutting Tool for standard blade cutting. PPT Passe-Partout Tool for 45° cuts. POT Pneumatic Oscillating Tool for thick and soft materials, with blades up to 110 mm cutting depth. RM-120 Routing Module with a 1 kW high-frequency routing spindle and a 6 mm collet. Set of 6 mm milling cutters for, among other things, foam. This allows the machine to cut, oscillate cut, make 45° cuts, route, drill, and engrave. Automatic tool initialization (ITI) ensures the setting of cutting and routing tools. For material transport, the G3 is equipped with a conveyor belt, a 1,600 mm infeed extension, and a 3,200 mm outfeed extension. In addition, a transport beam, extra drive, and a passive roll-off unit are included. The roll unit can handle material rolls up to Ø350 mm and a maximum of 70 kg. A material guide roll reduces wrinkles and creases during infeed. To secure the material, the machine has a self-regulating vacuum turbine of 1-9 kW. Nsdpfx Aaozu Tcfj Rslf The integrated ICC color camera handles the recognition of registration marks and supports, among other things, border recognition, best-fit, fit-to-object, and fit-to-job. This allows printed materials to also be cut accurately. The machine is controlled with Zünd Cut Center V3.x. The configuration includes Cut Server, Cut Manager, Cut Editor, Cut Queue, Routing Option, and Camera Option. Jobs can be processed automatically via hotfolders. A wireless barcode scanner allows for automatic loading of jobs from the queue. The complete machine configuration is approximately 9,510 x 4,220 mm. Approximately 11,510 x 6,220 mm of floor space is required. The minimum ceiling height is 3,000 mm; due to the guidance of the routing module, a minimum of 3,200 mm must be taken into account for this configuration. Technical connections: 3-phase 323-457 V, 50 Hz, minimum 32 A. 30 mA type B residual current device (RCD). Compressed air 0.8-1.0 MPa (8-10 bar). Compressed air capacity 400 l/min. Minimum floor load 200 kg/m². Industrial dust/chip extraction for routing work. Extraction capacity at least 3,150 l/min, 22-25 kPa, and Ø45 mm connection. In short: a fully equipped Zünd G3 XL-3200 with a cutting area of 2,270 x 3,200 mm, a material pass-through of 120 mm, and processing of materials up to 110 mm thick with suitable tools. The combination of UCT, PPT, POT, and 1 kW RM-120 allows the machine to cut and route a wide range of materials. The conveyor, automatic material feed, roll processing, camera recognition, and workflow automation make the machine suitable for both single pieces and automated production.

Condition: used, Year of construction: 2019, functionality: fully functional, Two-component, solvent-free dispensing system for food products Output: 2.5 kg per minute Nlodpfezwgb Tex Aa Rof 2 dispensing pumps for drums This dispensing mixer was developed for two-component, solvent-free adhesives and features a preheating function to improve adhesive flow and stability during operation.

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V Nledpjzwhdiofx Aa Ref - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Nlodjzud Ekopfx Aa Ref

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. Nlsdpfxeyy Rtzs Aa Rjf We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: excellent (used), Year of construction: 1987, max tool diameter: 16mm max hole depth: 160mm max milling length: 160mm Njdsqwdxxjpfx Aa Rjlf front/rear drilling apparatus adjustment working table dimensions: 620x280mm table rotation angle: +20˚ adjustment of table up/down and sideways material pressure motor power: 1,5kW dimensions L/W/H: 1100x650x1200mm weight: 280kg

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply Nlodpfx Aaozv Utnj Rof The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, overall weight: 666 kg, input voltage: 400 V, total width: 1,180 mm, total length: 1,180 mm, total height: 3,640 mm, filter area: 60 m², suction capacity: 6,000 m³/h, negative pressure: 2,300 Pa, input frequency: 50 Hz, input current: 11 A, Equipment: type plate available, CleanAirTower is an energy-efficient, stand-alone space filtration and ventilation system. The CleanAirTower space filtration and ventilation system is ideal for environments where localized fume extraction is not feasible. It is even more effective as a supplement to workstation fume and dust extraction systems. Undoubtedly, one of the device's key advantages is its impact on reducing heating costs in industrial halls. Air is drawn in, circulates around the device through a built-in fan, and then clean, warmed air is returned to the environment. Another advantage is the elimination of the need for pipeline installation. The device operates as a self-contained unit. Nodpfx Aajzv Nbtj Relf Year of manufacture: 2023 Self-cleaning device (cleaned with compressed air during operation). Specifications: - Motor power: 5.5 kW - Performance: 6000 m3/h - Max. vacuum: 2300 Pa - Sound pressure level: 72 dB(A) - Number of filters: 3 - Filtration area: 60 m² - Dimensions (L/W/H): 1180 mm x 1180 mm x 3640 mm - Weight: 666 kg Stock number: 0009

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, manufactured in 2021 by the premium manufacturer Rational (successor to the VCC 211). A major inspection was carried out in our in-house workshop, and the iVario L is in excellent condition. The offer does not include any accessories, but they can be purchased separately for an additional charge. The list price for this unit is €19,976 net = €23,771.44 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21038052776 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional Further details: Integrated 230 V socket Integrated hand shower with automatic retraction and spray dosing High-quality pot base, seamless with rounded corners Core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable Integrated hose shower on the unit Integrated water drain in the pot Temperature unit adjustable in °C or °F Cooking pot can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Including base unit with plastic feet Functions: Manual mode (30°C-250°C): adjust liquid temperature, adjust pot base temperature, adjust oil temperature Nedpfx Aszvndtea Rslf Automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (AGB).

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: Nljdpfx Aaeyr Aiwe Rof 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.