Used Raiming Generator for sale (9,681)

Condition: good (used), Year of construction: 2015, overall weight: 2,010 kg, fuel type: diesel, power: 120 kW (163.15 HP), output current: 424 A, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, Generator RAIMING RMITO-120, 2015, 120 kW, diesel. Nlsdpowfcx Hofx Akyja

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Nlodev Uag Ispfx Akyoa

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Nlodpoyl Nntofx Akysa

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Nlsdpfxsx U Tgme Akyja The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Nledpfexfrv Ejx Akyoa Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Nlodpew U N Dajfx Akyea

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Nodpsy Emwyefx Akyela Voltage: 400/230 V Phases: 3 Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Nodpfx Aksruakgoyela Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: new, functionality: fully functional, machine/vehicle number: SH 200, Heat Recovery Co-Generation System, featuring: Integrated by: Wartsila Heat Recovery Steam Generator System; Alfa Laval Steam Header SH 200, Alfa Laval Vertical Exhaust, Gas Boilers, Model AV-6N, Alfa Laval Steam Drum HK-10-2, Alfa Laval Feed Water Control Unit, Alfa Laval Condensate Transfer Pump RDD 901, NCE Boiler Washing Water Tank, Alfa Laval Blow Down Cooling Module, Alfa Laval Aalborg Oy WES Technik T-Piece Damper, Wartsila Logics Controls, Alfa Laval R1 Heat Recovery, Universal Vent Silencer, SWAS pH Water System (containerized). Nlodjyf N Umepfx Akyea Sistema de cogeneración con recuperación de calor, que incluye: integrado por generador de vapor de recuperación de calor Wartsila; cabezal de vapor Alfa Laval SH 200; escape vertical Alfa Laval; calderas de gas Alfa Laval, modelo AV-6N; tambor de vapor Alfa Laval HK-10-2; unidad de control de agua de alimentación Alfa Laval; bomba de transferencia de condensados Alfa Laval RDD 901; tanque de agua de lavado de calderas NCE; módulo de enfriamiento de purga Alfa Laval; compuerta tipo “T-Piece Damper” Aalborg Oy WES Technik de Alfa Laval; sistema de control lógico Wartsila; recuperación de calor Alfa Laval R1; silenciador universal de ventilación; sistema de agua SWAS para control de pH (contenedorizado).

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Nedpfx Asxaqa Sokyola Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Nledpsxdfazjfx Akysa Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Nlsdsxdfa Ujpfx Akyja Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Nledertrykjpfx Akysa Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: new, Year of construction: 2025, machine/vehicle number: XPD00285, fuel type: diesel, power: 248 kW (337.19 HP), motor manufacturer: Cat C9.3B, General information Field of application: Construction Weights Empty weight: 4.784 kg Functional Generator capacity: 310 kVA CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Nsdpfet D Uhzex Akyela Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 67.2 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final

Condition: new, Year of construction: 2025, machine/vehicle number: XPJ00261, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 4.487 kg Functional Generator capacity: 200 kVA CE mark: yes Other information Fuel consumption: 43.4 Liter / hour at 100% load Generator: Cat LC5100 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 822 l Transport dimensions (LxWxH): 4,085x1,42x2,35 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = Nodpfx Akst D Uhujyela - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 64.6 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: CATXQP20KXPZ00144, fuel type: diesel, power: 16 kW (21.75 HP), motor manufacturer: Cat C2.2, General information Field of application: Construction Weights Empty weight: 815 kg Functional Generator capacity: 20 kVA CE mark: yes Other information Fuel consumption: 5.5 Liter / hour at 100% Load Generator: Cat LC1100 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 56 l Transport dimensions (LxWxH): 1,718x1,001x1,3 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = Nljdpot D Uhnsfx Akysa - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: XPV00245, fuel type: diesel, power: 92 kW (125.09 HP), motor manufacturer: Cat 4.4, General information Field of application: Construction Weights Empty weight: 2.527 kg Functional Generator capacity: 115 kVA CE mark: yes Other information Fuel consumption: 27.3 Liter/hour at 100% Load Nledpfx Akst D Uhhjyja Generator: Cat LC3100 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 518 l Transport dimensions (LxWxH): 2,97x1,15x2,076 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Noise Rating: 65.9 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: WR300208, fuel type: diesel, power: 1,000 kW (1,359.62 HP), motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 6.985 kg Functional Generator capacity: 1.250 kVA CE mark: yes Other information Fuel consumption: 185.5 Liter per Hour at 75% Load Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 4,64x1,68x2,16 Production country: US Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Nodpfx Aksxq Up Eeyola - Control Panel

Condition: new, Year of construction: 2025, machine/vehicle number: YBW92020, fuel type: diesel, motor manufacturer: Caterpillar 3516B HD, General information Field of application: Construction Weights Empty weight: 18.290 kg Functional Generator capacity: 2.500 kVA CE mark: yes Other information Fuel consumption: 453 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 6,38x2,29x2,37 Production country: DE Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information = Additional options and accessories = - Control Panel Nsdpen An A Nefx Akyola

Condition: new, Year of construction: 2022, machine/vehicle number: U045006, Field of application: Construction Empty weight: 771 kg Generator capacity: 300 kVA Nljdpfx Akey Hbpmsyja Dimensions of cargo space: 110 x 60 x 82 cm CE mark: yes Frequency: 50 Voltage: 400 Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information Flywheel size: SAE1/14" Mecc Alte ECO38-1L/4C DER1 voltage regulator 300kVA continuous / 330kVA stand-by power

Condition: new, Year of construction: 2024, machine/vehicle number: DGDH1397S22818H, fuel type: diesel, motor manufacturer: Perkins 4008-30TAG3, General information Field of application: Construction Weights Empty weight: 9.896 kg Functional Generator capacity: 1.250 kVA Nlsdpfx Akjyg U Nxoyoa Dimensions of cargo space: 582 x 227 x 280 cm CE mark: yes Other information Fuel consumption: 188 Liter / Hour at 75% Load Generator: Gentech GNT-1250 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 2060 l Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2016, operating hours: 11,629 h, fuel type: diesel, motor manufacturer: yanmar, Field of application: Construction Njdpsy Hbq Dofx Akyjla Please contact Kristoff Van Havere for more information

Condition: used, This listing is for a Bioquell Clarus L Hydrogen Peroxide Vapour (VHP) Generator. The unit is in full working condition and ready for immediate use. A mobile system designed for surface bio-decontamination of labs, isolators, and equipment, providing 6-log sporicidal reduction Nsdpfxoy D T Ngo Akyjla

Condition: like new (used), Year of construction: 2011, operating hours: 36 h, machine/vehicle number: 02573550-060, color: green, power: 310 kW (421.48 HP), output frequency: 50 Hz, nominal power (apparent): 345 kVA, Used Diesel Generator – Cummins | 352 HP / 263 kW Standby | Enclosed | With Fuel Tank Technical Specifications: Engine Brand: Cummins Engine Model: QSL9-G5 Standby Power: 352 HP /263 kW at 1800 rpm Prime Power: ~310 HP / 231 kW at 1500 rpm Voltage: 400/231 V Frequency: 50 Hz Nodpfxswzirxs Akyela RPM: 1500 Fuel Type: Diesel Cooling: Liquid-cooled Control Panel: Included Fuel Tank: Integrated base frame fuel tank (visible on photos) Condition: Used – very good visual and operational condition Soundproof Enclosure: Yes Manufacturing Label: Frame code 4A9A145639

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Nlodsxb D Hbspfx Akyoa Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Heat exchanger: Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Condition: Equipped with Jenbacher DIA.NE control and monitoring system Fully serviced in line with OEM schedules by an official service centre Excellent working condition 📍 Location: England