Used Randek Fm1000 for sale (19)

Condition: excellent (used), Year of construction: 2018, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 16236/1, nominal power (apparent): 480 kVA, Great framing line Lsdpfx Ajyngpgom Nsaa

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Laodpfjxv Arxex Am Nja Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Laodpfx Amjykqxds Nea Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: new, Year of construction: 2027, The ZeroLabor Robotic System Product Family. Lodpfx Amoduub Us Njaa Robotic: Assembly, Framing, Sheathing, Gluing and Insulation. The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. - Marking of component using inkjet. - Gluing - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek cut-out saw JS400C is designed to make cut-outs at the end of pieces of wood, for example, for inserting a belt beam in vertically standing handles. The machine fixes the wood pneumatically and makes two cuts with the two 400mm diameter saw blades. The maximum length is 380mm and the depth of cut can be adjusted to a maximum of 115mm. The saw can be operated quickly and easily by means of a foot pedal. Functional description The wood to be notched, e.g. a handle, is pushed into the covered saw slot up to the set stop. and. The protruding end is placed on a roller block (not included). A foot pedal is used to pneumatically fix the inserted wood and trigger the sawing process. Technical description - Notching depth: 30 - 115 mm - Notching length: 10 - 380 mm - Wood thickness: 30 - 70 mm - Electrical connection: 3 x400 V, 50 Hz, 25 A - Compressed air: 0,5 - 0,8 MPa (5 - 8 bar) - Saw blades: HM 400/30-3,5/2,5/40 Safety The saw is well sealed against tampering by means of a cover plate. When the cover is opened, the electric current is automatically cut off, which minimizes the risk of injury. Lajdpfx Amod Arwhs Nea Advantages - Makes notching/cutting effective and precise - Flexible and easy to set up - Easy to operate - The set working height and the possibility to operate the machine by foot pedal makes the working conditions easy.

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: Lasdpj Nn Hyefx Am Nea • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Lsdpexwkuqefx Am Neaa Press head: 23T, 27T, 35T, 50T Laser system as an option.

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. Lsdsfg Tatopfx Am Neaa 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Lodpsx Tdtnsfx Am Noaa Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Lsdpfx Ajxq Rrcem Nsaa

Condition: ready for operation (used), Year of construction: 1975, Cutting saw Randek Model: 1-5-S Machine no: 431 Year of manufacture: 1975 Ledpfx Amjldg Skj Noaa Tech. info: Blade diam: 700mm Rotating blade in degrees In and out feeder: 4 m in, 5 m out Stock no: 2001525BXM

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw Laodpoh Ayyqofx Am Noa manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Ledpfx Amoxqpqke Nsaa Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Laodsvryhgepfx Am Nja

Year of construction: 1994, condition: ready for operation (used), A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible. Ljdewv Umqopfx Am Noaa

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle Lasdpfx Asivaryem Nea • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened Lasdpfx Amsvt Dwbs Noa - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: new, functionality: fully functional, Year of construction: 2016, machine/vehicle number: VM-BASIC-90-CON, Vacuum lift device unit for handling of windows. Load: 200 kg. Dead weight: 114,88 kg. Lajdpfxsyngime Am Noa Four vacuum cups diameter 210 mm. Electrical vacuum pump. Acoustic warning for low vacuum. Electrical tiltable 90 degrees.

Condition: ready for operation (used), functionality: fully functional, total width: 13,800 mm, cutting length (max.): 6,900 mm, Roof Truss Pressing System (C-Type) – Complete Production Line with Crane Complete, fully equipped roof truss pressing system for sale. The system is in good technical condition, regularly maintained, and ready for immediate operation – no additional investment required. Designed for professional timber structure manufacturing, suitable for small to medium-scale production. 🔧 Included Equipment • Hydraulic roof truss press • C-type configuration • Assembly & pressing tables • Floor-mounted rail system: 12 m • Second-hand tables: 12 pcs • Like new Randek pressing tables: 4 pcs – 550 mm • Like new Randek ridge table: 1 pc – 900 mm • Overhead crane system • Crane radius: 6.9 m 📌 Key Advantages • Fully operational – plug-and-produce setup • No immediate repair or upgrade costs Lsdeymmrlopfx Am Noaa • Efficient workflow layout with integrated rail system and magnetic tables • Ideal for prefabricated roof truss production 📍 Additional Information • On-site inspection available • Suitable for companies entering or expanding in timber construction • High-quality industrial-grade equipment • Transportation costs are not included.