Used Re-Lathe for sale (16,073)

Condition: good (used), functionality: fully functional, Type PM1-F-Z, data: Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm Bedpfx Ajy Smvpsggjwn 3 right-hand speeds and 3 left-hand speeds approx. 670 / 1140 / 2840 rpm

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Bsdpfehtnu Tjx Aggown

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Bwsdpfxjzav N To Aggsn Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Mostana 1M65 x 5000mm Centre Lathe Bwsdpjxwkvhefx Aggen Year 1991 Serial Number 3892 Distance Between Centres 5000mm Swing Over Bed 1000mm 3 Point Steady Sliding Chuck Guard Tailstock Power feed to compound

Condition: excellent (used), Harrison V390 Vari Speed Gap Bed Lathe (2004) Model V390 Year 2004 Condition Used Swing Over Bed 400mm Distance Between Centres 1250mm Swing Over Cross Slide 246mm Bwsdpjxwkwxsfx Aggsn Height of Centres 195mm Bed Length between Centres 1250mm Swing over Bed 400mm Swing in Gap 585mm Swing over Cross Slide 246mm Spindle Bore 54mm Morse Taper in Nose Bush No. 4 MT

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 70 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, rotational speed (min.): 70 rpm, rotational speed (max.): 3,800 rpm, total height: 1,800 mm, total length: 3,900 mm, total width: 1,800 mm, For sale is a robust and reliable Okuma CNC lathe, model LB15, with an integrated Okuma robot and automatic material feed. The machine is ideally suited for automated series production and impresses with its high reliability and stable design. The machine is in working condition and can be inspected under power by arrangement. Technical data: * CNC control: OSP 5000L-G CNC system (German) * Data transmission: RS232 * Tool turret: 12 positions * Spindle speed: 70–3800 rpm * Spindle power: 11 kW (30 min) / 7.5 kW continuous operation * Spindle bore: Ø 75 mm * X-axis travel: 400 mm * Z-axis travel: 500 mm * Feed rate XZ: 12,000 mm/min * Power supply: 3 × 400 V * Rated machine power: 21 kVA * Maximum load current: 36 A * Machine dimensions: approx. 2.9 m length approx. 3.9 m with chip conveyor approx. 1.8 m width approx. 1.72 m height * Machine weight: approx. 4,500 kg Equipment: * Integrated Okuma robot * Automatic part feeding * Ideal for series and automated turned parts * Stable and durable design Bjdpfjy Tp D Ssx Aggown Particularly interesting for: * Series production * Unmanned production * Automated turned parts * Production expansion or export Loading and transport can be arranged. Price: Negotiable plus VAT. Location: Germany If interested, please contact us. All information is non-binding, subject to prior sale. Machines/machine parts are sold without warranty claims and remain our property until full payment.

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Bwodpfxev I T Ews Aggsn Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Bodpeyaywhjfx Aggjwn Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck Bwsdpfx Agox D Uf Togon 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Bwodpfx Agewmm H Rjgjn Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System Bodswmm S Topfx Aggjwn 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor Bwedpfow N Rh Ajx Aggsn belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm Bodpfx Agsza Eipogown - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Bedpsy Shyiofx Aggewn

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Description WE SELL AN STUNNING NICE CONDITION CNC BIGLIA WITH TOOLS AND ACCESSORIESS CONDITION IS AS ALMOST NEW. VERY LITLLE USED. FANUC SERIES 18-T Maximum turning diameter: 520 mm Maximum turning length: 500 mm Bar turning diameter: 80mm X axis travel: 210 + 5 Z axis travel: 500 + 10 Spindle speed: 4000 rpm Spindle motor: 11-15 Kw (50%) Spindle connection: ASA 6 Spindle hole: 80 mm Self-centering diameter: 250 mm Turret: number 12 stations Tailstock: CM 4 Dimensions: 3500 x 1670 x 1650 mm Bwjdpfxsvk Ezcs Aggjn Weight: 4600 Kg HOLE TROUGH SPINDLE: 82 m YEAR:1997

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Specifications Manufacturer MONFORTS Model RNC4 Year 1993 Description WE OFFER AN VERY NICE CONDITION MONFORTS CNC LATHE INCLUDING COMPLETE TOOLINGS DRAWERS FOR TOOLS MACHINE HAS LIVE TOOLS , DRIVEN TOOLS Bwedpfx Asvk E A Toggsn MACHINE IS CONECTED ON POWER TECHNICAL INFO: Diameter 420 mm Distance between centers 600 mm CNC system Control System F Tools 12 positions Cross travel 250 mm Longitudinal travel 620 mm Hole through spindle 65 mm Spindle speed 70 - 4000 RPM Motor power 18,5 HP Weight 7500 Kg

Condition: good (used), functionality: fully functional, MACHINE IS IN GOOD WORKING CONDITION Bwsdpfx Asvkycnjggsn Machine need NEW TAILSTOCK Machine Has ben used in Switzerland, Specifications Manufacturer CAZENEUVE Model HB575

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, WE OFFER AN VERY EXCELLENT CONDITION CNC LATHE PROTEO WITH TURNING MILLING Bsdpfjvk R Sgox Aggswn INCLUDING BAR FEEDER BOSS 332 E YEAR:2013 NEW AND TOOLS -ACCESSORIESS MAX BAR 25mm FAGOR OPERATION CONTROLS

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, WE OFFER UNIVERSAL LATHE WITH BRAND NEW 3 AXIS DIGITALS COMPLETE TOOLS AND ACCESSORIESS. DESCRIPTION Description Precision lathe, turning machine -Manufacturer: VDF Heidenreich & Harbeck -Machine bed rails: hardened -Turning length: 750 mm -Turning Ø over bed: 500 -Turning Ø over recess: 355 mm -Turning Ø over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm Bjdpfxovkpkzo Aggown -Tailstock mount: MK4 -Drive: 7.5 kW -Accessories: 1x steady rest, 6x Multifix tool holder, -Dimensions: 1180/3050/H1345 mm -Weight: 2000 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Description WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT Description For sale: Well-maintained EMCO Hyperturn 665 MC Plus IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Bjdpevk E Atefx Aggjwn Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request! TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Controlled in 8 axis - x1-x2-z1-z2-c1-c2-y-b axes Accessories: BAR FEDER AND HUGE LIST OF TOLLINGS ON PHOTOS Length: 3400 mm + convoyer , Height: 2300 mm, Width: 2550 mm, Weight: 7600 kg

Condition: excellent (used), Year of construction: 1985, functionality: limited functionality, Description Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x Bwedpovk E Aysfx Aggen - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Specifications Manufacturer HARDINGE Model HARDINGE TWIN SPINDLE LATHE QUEST 8/51 Year 2002 Description 2002 HARDINGE QUEST 8/51 CNC SUB SPINDLE, DRIVEN TOOLING LATHE WITH GE FANUC SERIES 16I-T CONTROL 150mm Dia 3 Jaw Power Chuck. Bwedevk E Ddjpfx Aggjn Collet Chuck Sub Spindle, 12 Station Turret. Quantity Of Static & Driven Holders. S/No. QC-28 (2002).

Condition: new, Year of construction: 2023, functionality: fully functional, power: 70 kW (95.17 HP), 3 SPANNER Wood Power Plant HKA70 Wood Power Plant HKA70 consisting of: CHP unit with 68 kW electrical output, Type 70-7.4-V2.0: incl. synchronous generator, exhaust gas heat exchanger, silencer Wood gasifier, Type HV70-V2.0: incl. magnet for metal separation in sluice area, reformer, gas cooler section, Wood gas filter Remote maintenance and remote start module, CO warning system Control cabinet and connecting cables 3 x Mixed flow cooler HKA70 3 x Spare parts package HKA70 Bwodey Ayhyopfx Aggen 3 x Preheating HKA 3 x Sensor for heat-led interval operation 1 x Service flare 3 x Connection kit flare 1 x External VPN router 1 x Oil change device 1 x Heat exchanger cleaning device 1 x Mobile CO measuring device 1 x Pressure measuring device 1 x Fan 3 x Slanted residue discharge 3 x Failure head for residue discharge 3 x Connection conveyor channel – steel box 6 x Steel ash box 800 liters

Condition: good (used), Toolholders bought in company where used for Biglia machine Bwodeyuyhispfx Aggsn

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Bjdpfxey D E Rio Aggown Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.