Used Reiden Bfr23- 5 Achsen for sale (59,041)

Condition: excellent (used), Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, controller model: 530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition. 5-axis simultaneous machining. Rotary table: 1700 mm. Table load capacity: 6 to 9 tons. Spindle hours: 9000 h. Crjdpfx Adsytt Elo Nsb

Condition: excellent (used), Year of construction: 2018, operating hours: 241 h, functionality: fully functional, machine/vehicle number: Maschinen-Nr. 8914, working range: 4,250 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, type of input current: three-phase, input voltage: 400 V, table length: 4,650 mm, table width: 2,050 mm, pressure: 4,150 bar, travel speed (max.): 40,000 mm/min, table load: 1,000 kg, total height: 3,800 mm, total length: 6,700 mm, total width: 3,000 mm, compressed air connection: 8 bar, pump pressure: 4,150 bar, overall weight: 4,500 kg, product height (max.): 350 mm, power: 30 kW (40.79 HP), We are offering this very well-maintained CMS brembana idroline S waterjet cutting machine, year of manufacture 2018, for immediate sale. This is a rare opportunity to acquire a machine with very low operating hours—only 241 hours!—and in excellent condition. Codpfx Aeyti Iisd Norb If you are looking for a robust, reliable, and precision machine, this model comes with a 5-axis head, Easy-Stone software, and a 15" TFT color display with membrane keyboard. It features the CMS Powder Free system, with guides protected against water and dust [rack and sliding guides are protected within the structure by a labyrinth seal]. The bridge design includes gantry drive, allowing workpiece supports up to 1000 kg/m². The machine weighs approximately 4,500 kg (without water). Equipped with lift doors on both the front and rear, ensuring no splashing water or abrasive sand ends up on the workshop floor. Sand is removed from the water tank via a chain conveyor. Abrasive material feeder for up to 330 kg of abrasive. The tank holds 8,000 liters of water. High-performance Greenjet EVO pump, 4150 bar / 30 kW / 40 HP / 400 V ±5%, 50–60 Hz. Manufacturer: CMS Model: brembana idroline S Year: 2018 Machine type: Waterjet cutting machine If you have any questions or would like more information, please feel free to contact us by message or phone.

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm Codoxap Easpfx Ad Nerb z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, CORREA NORMA 25 PI Crsdpfx Adjyupk Hj Njb Year of manufacture: 2024, few operating hours Heidenhain TNC 640 HSCI Travel: 3500x1500x1500 mm Table: 3800x1250 mm Integrated rotary table: 1200 mm Tool changer for 60 tools, SK50 Orthogonal milling head: 6,000 rpm, 0.02° x 0.02° Touch probe Chip conveyor Through-spindle coolant (IKZ) 70 bar with paper band filter Air cooling Full enclosure with roof etc. Inspection under power possible

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales Crjdpfx Adoxvzy Us Nsb PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 Codpfouxbcisx Ad Njrb control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t Crsdpfx Adsu Idm No Neb dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! Crodpfx Aswiatisd Njb So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes x 5000 mm y 1350 mm z 450 mm a 190° Cjdpfeig T Epjx Ad Nerb main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Condition: good (used), Year of construction: 1985, Machine is in good working condition. X axis travel - 4000mm Credpfxjyvt Rhj Ad Nsb Parts shown by hand not come.

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Cedpjyly Drofx Ad Nerb

Condition: like new (used), Year of construction: 2009, operating hours: 25,546 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 3,200 mm, total width: 3,100 mm, table width: 1,000 mm, table height: 800 mm, table length: 1,000 mm, overall weight: 24,450 kg, spindle speed (min.): 16,000 rpm, spindle motor power: 28,000 W, Year of construction: 2009 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1500 Y-axis travel mm: 800 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001º) A-axis degrees: 0º/-90º B-axis degrees: ±90(0.001º) Rapid traverse m/min: 30 Worktable Codpfxjyiarbe Ad Nerb Number of pallets: 4 Table dimensions mm: Ø1000x800 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 16000 Spindle drive power kW: 28(100%ED) Spindle torque Nm: 84/63 (40/100%ED) Tool system Tool holder: HSK-A 63 Tool magazine slots: 208 With free neighboring places mm: 140 With occupied neighboring places mm: 80 Max. Tool Length mm: 330 Max tool weight kg: 10 Chip-to-chip time s: 7 Equipment Chip conveyor Signal lamp Tool measuring arm Bar loader Chuck foot switch (double) for main and counter spindle Driven tools included Machine running times Under power: 25546 Rated power kVA: 54 Basic machine dimensions / weight Length mm: 3200 Width mm: 3100 Height mm: 3200 Weight kg: 24450

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor Cjdpfx Adsxhg Dij Nsrb - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, rotational speed (max.): 7,000 rpm, coolant supply: 40 bar, Universal Machining Center Machine type: Reiden BFR-23 Control: Heidenhain iTNC 530 Year of manufacture: 2006 TECHNICAL DATA: Travel paths: X-axis: 3,000 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: +-180° Rapid traverse (X/Y/Z): 20 m/min Swivel Head A-axis: +/- 270° Crodpfex U Rzzjx Ad Nob Speed range: 20 - 7,000 rpm Gear stages: 2 Drive power: 45/30 kW Torque: 1,133 Nm Tool holder: SK 50 Big Plus Tool positions: 64 Tool length: 600 mm Tool diameter: 250 mm Tool weight: 20 kg Table size: 2,800 x 1,000 mm Max. table load: 6,000 kg Connected load: 80 kVA Machine weight: 29 t Space requirement (LxWxH): 6,380 x 5,135 x 3,250 mm Features: Chip conveyor Coolant system

Condition: used, maximum load weight: 27,450 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 05/2016, Equipment: ABS, Krone SDR 27 refrigerated semi-trailer with swing doors Unit type: Carrier Vector 1550 diesel + electric Crodpfx Aey Iq Ized Neb Double-decker with beams 3 axles, air suspension, disc brakes, pallet box, BPW axles, ABS. Payload: 27,450 kg

Condition: used, maximum load weight: 31,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2019, loading space volume: 35 m³, Equipment: ABS, Kässbohrer Cement Silo Loading volume: 35,000 liters 3 axles, air suspension with lift axle, BPW axles, disc brakes, ABS. Unladen weight: 4,500 kg Payload: 31,500 kg Codjy H T Hkjpfx Ad Nerb

Condition: used, axle configuration: 2 axles, total width: 25,500 mm, Year of construction: 2020, Equipment: ABS, For inquiries about the vehicle, Mr. Seidel is your contact person (by phone). trailers S2A 14 LSDN telescopic low-loader. Additional features: Extra rear lights, air suspension, BPW axles, Wabco ABS, Wabco Smartboard, drum brakes, spring-actuated parking brakes, both axles hydraulically steered, radio remote control for steering, hydraulically extendable by 4,500mm, beacon lights, cargo area dimensions: rear platform length 2,680mm, front platform length 3,200mm, low-bed length 5,900mm, width 2,550mm. Tire tread depth: 1st axle 4-10mm, 2nd axle 3-7mm. On request, we will be happy to provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Further details can be found on our homepage. ... Subject to errors, changes, and prior sale!!! Cjdpfoyfqywox Ad Nerb = Additional information = Gross Vehicle Weight: 38,000 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2009, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 9,000 mm, color: white, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - Disc brakes = Further information = Csdpfx Aoy Dftwod Nerb Axle configuration Tyre size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 10%; Tyre tread right: 10% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 7,596 kg Payload: 31,404 kg Gross vehicle weight: 39,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Bas Wolfs or Bas Wolfs for more information.

Condition: used, maximum load weight: 30,850 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 07/2017, loading space volume: 35 m³, Equipment: ABS, Kässbohrer cement silo 35,000 liters 3 axles, air suspension, pneumatic handrail, BPW axles, disc brakes, ABS. Unladen weight: 4,650 kg Csdjxthh Hjpfx Ad Norb Payload: 30,850 kg

Condition: used, maximum load weight: 30,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 03/2027, Year of construction: 2018, Equipment: ABS, * Listing/Vehicle No.: MTG14A * Office: * WhatsApp: Credpfjxvalpjx Ad Njb * Mobile: * Email: * Website: Rental of various trucks, tractor units, and trailers for short- or long-term hire. 7.5 t starting from €699.00 and 18 t from €1,000.00 per month, available at short notice! Contact us for details. 1x Krone refrigerated semi-trailer from 06/18, Carrier Vector 1950, double-deck, lift axle, rear portal doors, pallet box, payload 30,000 kg, tires: 385/65 R22.5, German trailer, 1 previous owner, TÜV (German MOT) available upon request for an additional charge! Net price – trade-in possible – Rental/financing/leasing brokerage available – All details subject to change, prior sale, typographical errors, and mistakes reserved! We deal exclusively in well-maintained German vehicles. Our service: all customs and export documents, Euro1 * Short-term license plates / 5 days * Zoll (customs) license plates / 30 days * Vehicle delivery * Vehicle collection * Vehicle inspections (main inspection and safety check) Our contact details and opening hours: Office: * WhatsApp: * Mobile: * Email: * Website: * Monday–Friday: 09:00 – 18:00 * Saturday: by appointment

Condition: new, empty load weight: 6,020 kg, maximum load weight: 27,980 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, Schwarzmüller K-Series 3-axle steel segment tipper | Volume: approx. 25 m³ | ABS / EBS | 9t SAF axles with disc brakes | Full air suspension | External tailgate | Tyres: 385/65 R 22.5 | Steel round body 7,650mm x 1,470mm | Floor made of 5mm HB 450 | Side walls made of 4mm HB 450 | Front platform | Unladen weight: 6,020 kg | Rolling tarpaulin | Subject to errors, input mistakes, and prior sale. Crsdjywywkepfx Ad Nsb

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-M5-22-48408, repeat accuracy: 0.004 mm, number of axes: 7, The new price of the machine in 2023 was €48,700! TECHNICAL DETAILS Number of axes: 7 Arm length: 2.5 m Repeatability: 0.0042 mm Volumetric accuracy: 0.054 mm MACHINE DETAILS Calibration date: 03.2023 Operating temperature range: 10 °C – 40 °C Operating humidity: 95% (non-condensing) Operating voltage: 100 – 240 V AC Crsdpfx Asyqwgbsd Nob Frequency: 47/63 Hz Notes: Without CAM2 probe/touch Professional license Specifications, information, and technical data are provided by the manufacturer; therefore, no guarantee can be given by the seller.

Condition: used, maximum load weight: 2,590 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 01/2024, loading space length: 4,800 mm, loading space width: 2,060 mm, loading space height: 30 mm, total width: 2,130 mm, total height: 870 mm, A21. GW26H346846 Internal / loading dimensions: 480 x 206 cm Payload: approx. 2590 kg Gross vehicle weight: up to 3500 kg Unladen weight: approx. 910 kg 3 braked axles Robust, fully galvanized chassis with V-drawbar Overrun brake and parking brake Steel frame and support rails made entirely of perforated plate, fully welded and hot-dip galvanized Transport platform: support rails made of LOHR perforated plate + central aluminum tread plate + additional reinforcement from plywood underneath the loading area Corrosion protection: hot-dip galvanized construction Manual winch Hydraulic hand pump tilting device Single-sided hydraulic cylinder for lifting and lowering Perforated support rails for load securing Side-folding rear lights for easy loading of the trailer Jockey wheel... and much more. Vehicle not refurbished Credoxw Dy Hjpfx Ad Nob Errors and prior sale excepted

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Cjdehqnl Tepfx Ad Nsrb Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. Credpfed Ab Uuox Ad Njb By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.