Used Roundness Measuring Machine for sale (68,709)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Predpezcqy Esfx Aihoa Max. weight of test piece: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 19142, roller (bottom) diameter: 140 mm, roller (top) diameter: 120 mm, working width: 1,250 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. pre-bending thickness: 4 mm Max. working width: 1,250 mm Number of rollers: 4 pcs. Prsdpfxezuwwas Aihsa Number of driven rollers: 2 pcs. Diameter of upper roller: 120 mm Diameter of lower rollers: 140 mm MACHINE DETAILS Control system: CNC Drive: Hydraulic Power: 4 kW Dimensions & Weight Unladen weight: 1,450 kg Dimensions (L x W x H): 2,700 x 1,450 x 1,500 mm Transport weight: 1,450 kg Number of transport packages: 1 pc. EQUIPMENT CE marking Documentation

Condition: good (used), Year of construction: 2006, voltage 110 - 230 V frequency 50 - 60 Hz Power connection 0,5 kVA weight 150 kg dimensions of the machine ca. 1,0 x 0,8 x 1,75 m Stick blade profile control unit - Control via PC control with Windows XP operating system - Digital drive amplifiers, linear motors and measuring systems - Fully automatic position determination of the cutting edges and axis position of the stick blade - Measurement of almost all single-part and continuous processes required for spiral bevel gears and hypoid gears Prjdoymfz Sspfx Aihja - Machine concept designed for the shortest set-up and changeover lines and maximum measuring accuracy - Combination probe for measuring tip and surface measurement - Integrated drawer for accessories - Keyboard integrated in flat drawer - Operating elements and PC protected against unauthorized access with lockable cabinet element

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Prodpfx Aezbvqyeihoa Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available Psdpszwucrefx Aihjra All accessories included Price: Euro 27,500.00 plus VAT, ex works

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet Prjdpfjfy U Ewsx Aihsa - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Faro Gage Plus measuring arm with 6 axes Measuring arm length: 4 ft (approx. 1.2 m) Podpfxjzwkphs Aihjra Accuracy: 5 + 8L/1000µm Includes measuring table, accessories, and matching transport case Includes operating instructions and manuals.

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Features and Technical Specifications: - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed Pjdpfxszw N Eue Aihera - With base frame - Electrical connection: 230 V - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm - Tool: r = 2.5 or r = 3

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Psdpfx Aiozwlnrjhjra Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection

Condition: excellent (used), machine/vehicle number: 94681, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Prjdezwvk Rspfx Aihja Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional Psdpfxszwu Alj Aihsra In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, - Capacity 1050 x 3 mm Pedpfeq H D S Rox Aihera - Roller diameter 90 mm - Conical bending - Swing-out upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400 V

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, overall weight: 500 kg, input voltage: 230 V, year of last overhaul: 2026, maximum load weight: 350 kg, Equipment: documentation/manual, type plate available, MITUTOYO CRYSTA-PLUS M574 – AVAILABLE IMMEDIATELY – ATTRACTIVE PRICE Are you looking for a reliable Mitutoyo CMM at an attractive price? Prsdpfx Aezvyvhjihsa We are offering this Mitutoyo CRYSTA-PLUS M574, manufactured in 2012, for quick sale. This is an excellent opportunity for companies looking to expand their measurement capabilities without immediately investing in a new measuring machine. Mitutoyo quality, available immediately. The CRYSTA-PLUS series is known for its robust construction, ease of use, and reliable measurement performance. With a measuring range of approximately 500 × 700 × 400 mm (X/Y/Z), this machine is suitable for a wide range of dimensional control and inspection tasks. Machine Specifications Brand: Mitutoyo Model: CRYSTA-PLUS M574 Year of Manufacture: 2012 Measuring Range: approx. 500 × 700 × 400 mm Type: Manual coordinate measuring machine Availability: Immediate Sale Condition: AS IS / WHERE IS Competitively priced for quick sale This machine has become available, and we want to sell it in the short term. As a result, we can offer it at a very attractive price. The CMM is sold in its current condition (AS IS), without refurbishment or additional warranty. Inspection prior to purchase is of course possible and recommended, so you can assess the machine and its existing configuration yourself. Interested? Make us a good offer. If you submit a serious and reasonable offer, we can close the deal quickly. Contact us for more information, photos, to arrange an inspection, or to submit an offer directly.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 500 kg, total height: 2,750 mm, total width: 1,200 mm, total length: 1,400 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 1,800 kg, input voltage: 230 V, table width: 700 mm, table height: 600 mm, table length: 1,000 mm, year of last overhaul: 2026, maximum load weight: 500 kg, Equipment: documentation/manual, Nikon LKV 10.7.6 – complete 3D measuring system with scanner and probe For sale: Nikon LKV 10.7.6 in very good condition, complete with a Nikon LC15Dx 3D laser scanner and a Renishaw TP200 probe system. The combination of scanning and probing makes this measuring machine very versatile. The LC15Dx scanner is ideal for quickly and digitally capturing complex shapes and surfaces. This allows large amounts of measurement points to be collected in a short time, enabling efficient mapping of shape, contours, and deviations. The TP200 probe is suitable for highly accurate contact measurements, for example, of holes, surfaces, edges, and other geometric features. This allows both freeform shapes and critical dimensions to be accurately checked. With PolyWorks software, this machine is very easy and quick to program, so that measurements from both the probe and the scanner can be performed together in one program and included in the same report. The machine is offered complete, including: New PolyWorks|Inspector license High-end workstation computer Complete installation and configuration with calibration according to ISO-10360 Training and explanation Delivered ready for use A complete solution for 3D inspection, dimensional control, and quality control, allowing you to both scan quickly and probe with high precision. Prodpjzvyrcsfx Aihoa The machine is in very good condition and can be viewed and demonstrated by appointment. You are welcome to come and see the machine and discuss its capabilities. Please feel free to contact us for more information or to schedule an appointment.

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel Prjdpfx Asxbpgtjihea 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg Psdozwwwljpfx Aihora ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RA-7535, measuring range X-axis: 1,750 mm, measuring range Y-axis: 1,750 mm, repeat accuracy: 0.04 mm, Very neat measuring arm from the brand Romer Hexagon. With a measuring range of 3500mm and an accuracy of < 0.04mm, this measuring arm in combination with PolyWorks software is a very user-friendly system that allows you to perform accurate measurements for years to come. A HP-L-8.9 3D scanner has been added to the 6-axis measuring arm, making it a complete measurement system. The PolyWorks Inspector software, including scanning, version 2019, is included. Prsdpfju Hqfpsx Aihoa

Condition: like new (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,185 mm, total width: 1,082 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 550 kg, input voltage: 230 V, table length: 1,122 mm, travel speed (max.): 520 mm/min, table load: 180 kg, compressed air connection: 5 bar, Mitutoyo Crysta Apex-C544 CNC 3D coordinate measuring machine. Within the Netherlands, transport and installation will be provided free of charge (calibration and certificate are not included, but can be offered). Well-maintained Mitutoyo 3D coordinate measuring machine Crysta Apex-C544 In very good condition. Fully meets its specifications. Year of manufacture 2004. Three-dimensional measurement within two micrometers! Measuring range: X-axis 505 mm. Y-axis 405 mm. Z-axis 405 mm. Specification ISO 10360-2 MPEE = [1.9 + 3.0L/1000] µm (at a temperature of 16 ... 26 °C). Temperature compensated. Resolution 0.0001 mm. CNC speed 520mm/sec. Maximum acceleration 0.23 g. Load capacity with work piece up to 180 kg. Height 220 cm. Width 110 cm. Length 115 cm. Air-bearing shafts (feed 5 Bar). Operates on 230 Volts to controller (the CMM itself is low voltage). Crysta Apex-C544 (PH1 + TP200). Standard joystick. Desktop PC with Windows 11 Pro NL. 22-inch monitor. Mouse & keyboard. MCOSMOS v3.3 + Scanpak. Predpfxozvfddo Aihsa Upgrades are possible to: PH10T/M + PHC10-2. SCR200 + 6 STD module. MCOSMOS as desired, subject to availability. Dual joystick. On-site training. Sales prices exclude service (takeaway price): Transport, Installation, Calibration, and Measurement Certificate. Demo/working viewing is available in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration and certificate are not included, but are possible).

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, type plate available, Very good condition, original software including hardware key. Renishaw measuring probe. Pedpfx Aezw Rpnoihsra Direct sale to end-user only.

Condition: good (used), Tranklein BRM 500 Book block rounding machine Prsdpfx Aiszw Raashoa The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Pedpfx Ajzk I T Roihjra Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0007306, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, CRYSTA PLUS M 7106 Manual Coordinate Measuring Machine 1. 1 piece 8,500.00 8,500.00 Measuring range: X=700 Y=1000 Z=600 Length deviation of measurement: E=(4.5+0.45L/100) * High accuracy * Unlimited micro-feed capability for traversing (point acquisition) Pjdpfx Ajzkakboihjra * Self-adjusting air bearings * Quiet operation with minimum air consumption * Granite measuring table * Precision glass scales * Software for MS-Windows NT/2000/XP/WIN 7 * Upgrade from MCOSMOS Manual V2 to V4 * Computer - personal computer * LED monitor DELL 24" * Ceramic calibration sphere for SMS - diameter 20mm

Condition: new, Year of construction: 2026, roller diameter: 140 mm, roller length: 1,570 mm, Equipment: cone bending device, hardened rollers, swiveling upper roller, - Capacity: 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Tapered rollers Psdpsgg Nv Iefx Aihsra - Brake motor - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2018, A manual shaft measuring device for measuring shafts and rotationally symmetrical workpieces and for determining various form, position, length and diameter parameters is offered. Measuring length: 1200mm, max. workpiece diameter: 200mm, max. workpiece weight: 50kg, measuring method: manual, software: PREMION measuring software, operating system: Windows 11. Equipment: PC with monitors, keyboard and mouse, manual length and diameter module, centering tips and additional measuring accessories, PC replaced and equipped with Windows 11. Weight: 250kg. An on-site inspection is possible. Predpozvgibjfx Aihsa

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, table width: 680 mm, table length: 855 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Measuring range, X-axis: 400 mm Measuring range, Y-axis: 500 mm Measuring range, Z-axis: 350 mm Maximum workpiece weight: 280 kg Table width: 680 mm Table length: 855 mm MACHINE DETAILS Pjdpfxszu Ixus Aihera Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,100 x 1,100 mm Total weight: 500 kg