Used Sack & Kiesselbach Ep 630 for sale (4,385)

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm Laodpfx Amjyylhaoted width: 420 mm stroke: max. 310 mm weight: 3.700 Kg.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. Lodegwv S Ujpfx Amtsad daylight: max. 375 mm stroke: max. 275 mm weight: 4.500 Kg.

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Ledpfx Aewxw Amjmtsad Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Lsdpfx Aeul U Svomtsad Working height 1200 mm Drive power 10 KW

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Laodpfx Amjwuutbetsd Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced.

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm Lodpoxvdr Hofx Amtoad stroke 310 mm weight of the machine ca. 3500 t

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Ledpfowxw H Ejx Amtoad Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Lsdpfjgtty Tex Amtjad Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special equipment: Digital position measuring system Spline tool for internal gearing

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Ledpowi Tdbefx Amtsad Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm table size: 0/ 700 mm Location: In our warehouse

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Lodpfx Ashtaaqjmtsad Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Laodehfwqzopfx Amtsd Working speed in mm/sec.: 18 - 40

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Lodpfx Amexy Nt Rotsad Tensile strength: 630 N/mm 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks

Year of construction: 1998, condition: used, Second-hand machine Year of manufacture: 1998 Features and technical specifications: - Max. operating pressure: 10 bar - Compressed air receiver: 250 l - Maximum sound pressure level: 76 dB(A) - Theoretical suction volume: 630 l/min - Effective delivery rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1,450 rpm - Oil capacity: 1.2 l - Oil top-up quantity: 0.22 l - Motor: 3 kW / 400 V - Max. switching frequency: 20/h - Start-up: Direct start Weight 240 kg Availability: at short notice Storage location: 63934 Röllbach Lasdpfx Amszk Nyfsted

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm Ljdpfx Amjyfq Alstead • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition Laedswypqropfx Amtjd

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Lodpfx Amergw Exetoad Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 171 h, load capacity: 2,500 kg, lifting height: 3,600 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,360 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Laodpfezmkmfox Amtod Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery type: Lithium-ion Battery year of manufacture: 2021 Battery condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, safety light, lithium-ion technology.

Condition: used, functionality: fully functional, machine/vehicle number: 4301302500, Year of construction: 2021, load capacity: 1,200 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,260 mm, fork length: 1,150 mm, drive type: Elektro, Tow truck forklift Chassis number: 4301302500 Lajdpfx Aezkw E Aomtsd Fork width: 170 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 24V Battery capacity: 100Ah Battery type: Lithium-ion Battery year of manufacture: 2021 Battery condition: 80 - 100% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container forklifts, reach stackers, forklifts and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-to-own and financing at fair conditions are always possible for us. We would also be happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Please call me, Marco Levermann, and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way: Our specialized forklift workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale.

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Ledpfx Aoyu R Dzemtoad Exact technical dimensions are shown in the pictures. The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 440 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 1,070 mm, mast type: triplex, construction height: 2,450 mm, fork carriage width: 1,250 mm, fork length: 1,150 mm, empty load weight: 7,800 kg, total length: 3,130 mm, drive type: Lithium-Ionen, construction width: 1,550 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 150 mm Fork thickness: 55 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: As new Technical condition: Very good Front tires type: Non-marking Front tires size: 28x12.5-15 Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires size: 23x10-12 Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 560Ah Battery manufacturer: EP Equipment Europe BV Battery type: Lithium-ion Battery year of manufacture: 2024 Battery condition: 80 - 100% Description: Fully enclosed cab with heating, working lights front and rear, 3rd and 4th valve to carriage, beacon, rear BlueSpot, multi-function lever, indicators Laodpfx Asx U Nutjmted Load guard, side shifter, fork positioner, 3rd valve, 4th valve, rear working light, front working light, heater, load guard, fully enclosed cab, full free lift, CE certificate, safety light, non-marking tires, lithium-ion technology, interior mirror, joystick, beacon, windshield wiper, LED, seat,

Condition: good (used), Electric motor, three-phase motor -Manufacturer: EP, electric motor Laodpsv N U T Sjfx Amtod -Power: 0.19 kW -Speed: 1350 rpm -Shaft: Ø 11 x 20 mm -Design: B3/B14 -Dimensions: 215/135/H170 mm -Weight: 4.7 kg

Condition: good (used), Electric motor, three-phase motor -Manufacturer: EP Romania, electric motor type MA24F165S-2 -Power: 1.5 kW -Speed: 2855 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP44 -Dimensions: 295/200/H220 mm -Weight: 18 kg Lajdpspu Itfsfx Amtjd

Condition: used, Electric motor, three-phase motor -Manufacturer: EP REL, electric motor type eAL 100L2B-4 -Power: 2.2 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Number: 2x motors available -Price per piece -Dimensions: 370/252 / H250 mm -Weight: 29 kg / piece Laedpfx Aof E Iwwjmtod

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank, portable -Hydraulic pump: pressure up to 200 bar, unfortunately without type designation Laodoxbdghepfx Amtsd -Flow rate: 1.2 l/min -Motor: EP 1.1 kW / 1410 rpm -Hydraulic tank: with shut-off valve -Individual components: see photos -Dimensions: 400/220/H430 mm -Weight: 30.5 kg

Condition: good (used), electric motor, three-phase motor -Power: 0.75 kW -Speed: 1390 rpm Lsdoghm U Ropfx Amtoad -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 54 -Weight: 10 kg