Used Safan Smk 2050 40 Ts1 for sale (21,741)

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC electric press brake from Safan Model: SMK 2050 40 Capacity: 2050 x 40 tons TS1 CNC control Y1, Y2, X and R axes Rsdpfx Ameytbxyemju Pneumatic flat table Light barrier Year of manufacture: 1999

Year of construction: 2002, condition: ready for operation (used), A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible. Rsdpfxjyz Anaj Ammou

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive Rodpfxoxpqy Dj Ammou - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: good (used), Year of construction: 1997, Used small press brake from Safan Model: SMK L 25 1250 TS1 Capacity: 1250 x 25 tons TS1 CNC control Y1, Y2 and X axes CNC controlled Machine is supplied with one set of tools (not yet visible in the pictures) Rsdpjy Atw Usfx Ammou

Condition: good (used), Year of construction: 2004, Used Safan E Brake press brake Rodpfxoyykk Hj Ammsu Type: E Brake 50 2050 HS TS1 Capacity: 2050 x 50 ton WIla clamping with 1 set of tools TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled HS High Speed version

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg Rodoxwmwbspfx Ammeu - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Rjdpfx Aexzf Dzjmmeu Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Rsdpfxjxyw Sbe Ammou Hydraulic toolclamping Yes Power 7.5 kW

Condition: good (used), Year of construction: 2004, Used small press brake by Safan Type: H Brake 90 1600 TS1 Capacity: 1600 x 90 tons TS1 CNC control Rjdpoy Atwzsfx Ammeu Year of manufacture: 2004 Y1, Y2, X and R axes CNC controlled Wila New Standard top clamping Wila 13 mm lower clamping (hydraulic clamping) Light curtain

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: K 3945, functionality: fully functional, pressing force: 170 t, stroke length: 300 mm, working width: 3,100 mm, TECHNICAL DETAILS Press force: max. 1,700 kN Working pressure: max. 345 bar Connected power: 11 kW Redpfx Aewlqa Ssmmeu Working range Working length: max. 3,100 mm Stroke: max. 300 mm MACHINE DETAILS Connection voltage: 3×400 V 50 Hz Weight: 12,500 kg Top beam stop time: < 94 ms

Condition: good (used), Year of construction: 2002, Nette gebruikte kantbank van Safan Type CNCL K 170 3100 TS1 Rjdpjwz I Ekefx Ammsu Safan TS1 besturing Capaciteit 3100 x 170 ton Y1, Y2, X, R, Z1 en Z2 CNC gestuurd CNC Bombering Wila New Standard gereedschapsklemming

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Rodpfx Aoyf Hpzommju Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm Rodpergtd Uefx Ammsu -Weight: 69 kg

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Max bending length: 1,600 mm Distance between uprights: 1,600 mm X-axis travel: 600 mm Max stroke: 290 mm Controlled axes: X, Y, R Redpfx Amoylhkyjmsu Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution The machine is fully operational and in good overall condition.

Condition: excellent (used), Year of construction: 2000, Technical Data Approximate dimensions at site (L × W × H): 8,000 × 2,250 × 2,200 mm Weight (approx.): 5,600 kg Product Description Serial number: 42503 Clamping Unit Clamping force: 4,000 kN Dimensions of mounting plates: 1,300 × 1,080 mm Min./Max. mould height: at least 350 mm Maximum opening stroke: 1,300 mm Injection Unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar Electrical-Hydraulic Equipment Rsdpfx Asyu Nc Aemmou Rated power of pump motor: 45 kW

Condition: new, Fastech 3-roll round bending machine FRS 2050 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 2050 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm Rodshzq D Hspfx Ammju weight 1530 kg dimension L-W-H 3240 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 16000 € 307.2 € 2050 mm 4 mm 140 mm 2.2 kW 3200 mm 750 mm 1000 mm 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll Rodpoynmv Tjfx Ammsu upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo)

Condition: new, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2050 x 4 mm - Electrically adjustable rear roll - Conical rolling - Swiveling top roll - Braking motor - Emergency stop Redpfxspwgcue Ammeu - Documentation - 400V

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Redpfeu Awalex Ammju Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: new, Extraction capacity of filter unit at spigot*: 2050 m³/h Total power consumption*: 1.04 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 69 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 113 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. Rjdpfxoh Rfbxj Ammsu COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, The new price of the machine was €650,000! TECHNICAL DETAILS Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump operation Ambient temperature: above 10 °C Belt System Belt direction: from bottom to top Rjdszardtepfx Ammou Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel transverse belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Airflow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manual with air or hot gas Evaporator surface: 311 m² each Airflow rate: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heating: 4 x 0.72 kW Defrost interval: sequential Heating in the basin: hot gas Control System and Control Cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to refrigeration system: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Control cabinet: Stainless steel on stainless steel base Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm lamp: visual, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guides for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Maintenance-friendly accessibility SEW main drive with Danfoss frequency inverter SEW overdrive with Danfoss frequency inverter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel base Freezer LED lighting controlled via the touch panel Welded stainless steel floor pan with slope and drain outlets Underfloor protection heating with reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator tubes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the block Sequential defrosting Inspection hatch in the fan box Remote maintenance Ethernet

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Motor-power: 15kW Rodpfjwng R Sex Ammsu Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: Teach-in - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, total length: 9,530 mm, total width: 2,750 mm, total height: 2,950 mm, Weight: 55.000 kg Price: On request Cutting bench, cutting shear Type: Hydraulic Rsdpfowng Nbox Ammju Manufacturer: Safan Type: HVR 850-8 Year: 1997 Overhauled: 2021 (also new blades) Controls: Conventional Electrical back-gauge Cutting width: 8500mm Max. thickness: 8mm Back gauge: 1000mm Motor power: 15 kW Incl. documentation Machine dimensions for transport: 9530x2750x2955mm + extra parts Machine as a 550mm Sword; you can also put this machine on blocks (see drawings). Machine weight: 55000kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B 9329 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 8500 - Backgauge type: Electric - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Transport dimensions: 9530mm x 2750mm x 2955mm (l x w x h) - Transport weight [kg]: 55000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Safan HT 255-4 TS hydraulic plate shear for sheet metal, in unique condition! Hardly any signs of wear are visible on the work table from the sheet metal that has been processed on it! Rsdpoy Uliasfx Ammju Capacity: 4 mm over 2550 mm Easy operation, precise rear gauge digitally adjustable. Equipped with a safety guard on the rear and an emergency stop on the front. The machine has a support system for the cut material as well as a collection tray (not shown).

Condition: used, Year of construction: 1996, Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Rsdok Abgcopfx Ammju With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics