Used Schmidler S4 for sale (2,088)

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We offer this used Schmidler S4 carpentry machine, year of manufacture 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Machine type: carpentry machine - 4-strand cross conveyor (inclined, ascending) - Infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cut-off saw - Saw blade diameter: 710mm - Swivel angle: 360 degrees - Tilt: 0-65 degrees - Scrap wood pusher - Marking pin horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Powered outfeed roller conveyor - Pneumatic push ruler - Transport & measuring system - Conveyor belts need to be replaced - Controls: sema btl Maximum workpiece dimensions: Height: 300mm Width: 400mm Total length: approx. 21m Infeed roller conveyor Outfeed roller conveyor with push ruler and deposit rods Gjdpfey Ewxzox Almebl Machine used, operational. Conveyor belts need replacement. Machine can be viewed by appointment. Available immediately. If you have any questions or would like more information, feel free to send us a message or call us.

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Godpfxoya Dc Io Almsbl Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: new, For sale: Electric motor from the renowned German company Kuenle Elektromotoren Model KPER 132 S4 The motor is new, warehouse surplus Never used Very good condition, possible storage marks visible in photos Technical data: Power: 5.5 kW Speed: approx. 1440 rpm Voltage: 380/660 V Frequency: 50 Hz cos phi: 0.82 Gedsyv R Siopfx Almsbl Protection class: IP54 Design: IM B3 Made in Germany Applications: industrial machinery pumps fans production lines automation Robust, high-quality German industrial motor Ready for operation immediately after connection

Condition: new, Scope of delivery includes: 01x Base plate, second choice Material finish: galvanized Suitable for manufacturer: Dexion Type: Speedlock S4 Frame profile: S | M | H Material thickness: approx. 3.00 mm Total width: approx. 88 mm Total depth: approx. 140 mm Hole spacing (edge): approx. 38 mm Number of holes (plate): 03 pcs. Hole diameter (plate): approx. 13 mm Weight | per pc.: approx. 0.22 kg / pc. Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: Gbjdsyrr Tfopfx Almel This item is only available for collection. If transport or shipment of this item is required, additional costs will apply. These costs depend on the delivery location and the scope of delivery and can be provided upon request.

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Dexion Type: Speedlock Super 4 Scope of delivery includes: 01x pallet rack beam, used Material color: Sendzimir galvanized Beam type: SLB 110 Box profile: 110 x 50 mm Bracket: 4 HK (hook) Clear span: 2,995 mm 02x safety pins, used Design: fully galvanized To secure the cross beams Gjdpfxoxzqfks Almjbl against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for self-collection only. Transport or shipping beyond this can be arranged at additional costs, which can be requested from us individually depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: Speedlock Super 4 Scope of delivery includes: Gjdpfxjxzdm Ij Almebl 01x pallet rack beam, used Material finish: sendzimir galvanised Beam type: SLG-102 Box profile: 102 x 50 mm Connector: 4-hook (HK) Clear span: 2,995 mm Max. load per pair of beams: 2,100 kg, with evenly distributed load. 02x safety pins, used Design: fully galvanised To secure the longitudinal beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply. These costs can be requested from us separately depending on the place of delivery and the scope of delivery.

Condition: good (used), Technical data of the pallet rack traverse: Racking system: Dexion Type: Speedlock Super 4 Included in delivery are: 01x pallet rack traverse, used Material color: sendzimir galvanized Type of truss: SLO 89|2 box profile: 89 x 50 mm agraffe: 4 HK (hooks) clear width: 3.095 mm Gbodpfx Aloikm Tyomjl

Condition: excellent (used), Year of construction: 2000, Schmidler CNC carpentry line - Model: SAB 4 R - Year of production 2000 - DOS-based software, production files in BTL format - Line length 30 meters - Additionally a spare saw - Video available The line is 100 % FUNCTIONAL Gedoulvldspfx Almebl

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, total length: 21,440 mm, total width: 3,200 mm, working length: 16,000 mm, Schmidler SAB 4 Very good condition, machine direction from right to left, year of manufacture 1999 Cross conveyor, under-table swing cross-cut saw, waste wood ejector, marking devices, combination milling head including main, finger-joint and dovetail cutters, 2 drilling units Gjdpfxounl S Ej Almjbl Workpiece size: 300x400 mm up to timber lengths of 16 m possible Machine length: 21,440 mm Dismantling and transport to be arranged by purchaser. For an additional fee, dismantling and loading (without transport) can be organized.

Year of construction: 2023, condition: new, SEMIX Mobile 60 S4 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service. Godpfx Aljgaxccjmebl

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Gbsdpogay Udjfx Almsl All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Mobile 60 S4 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Gbsdpfx Aljgaxckjmel Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Gbedpfxjgay Uhs Almjl All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: S4 1TT33 3250, total width: 4,340 mm, total height: 2,775 mm, total length: 5,145 mm, working width: 1,350 mm, workpiece height (max.): 16 mm, Viet S4 sanding and calibrating machine. * 1st Longitudinal sanding unit T60 E IPP HP DU; Belts 1380x3250, Motorization by converter 15 KW * 2nd Transversal sanding unit T60 ET HP DUO , Belts 150x8700, Motorization by Converter 15KW Gjdpfx Aleutdrhomsbl * 3rd Transversal T60 AND HP DUO sanding unit, 150x8700 belts, powered by 15KW converter Variable speed belt 2-20 m/min suction unit.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: MB 0484 / 2014, type of input current: three-phase, continuous power (apparent): 10 kVA, type of cooling: air, total width: 1,119 mm, total length: 2,595 mm, total height: 2,510 mm, overall weight: 1,700 kg, For sale is a capacitor discharge welding system (CD welding system) from the brand GLAMATRONIC, model GKS-S4/12-Q, manufactured in 2015. The system is in good condition and is suitable for industrial welding applications with high process reliability and precise energy output. The system has been regularly maintained and is immediately ready for operation. The control cabinets are equipped with additional air cooling. Technical data: Make / Type: GKS-S4/12-Q Year of manufacture: 06/2015 Gsdpfey Rmk Dex Almobl Rated voltage: 3 x 400 V AC / 50 Hz Control voltages: 230 V AC / 24 V DC Rated power: 10 kVA Welding energy: 4 kJ Welding force: 12 kN Max. supply line fuse: 32 A Frame weight: approx. 1,700 kg Control cabinet weight: approx. 1,000 kg

Condition: ready for operation (used), Yokogawa DX220-3-2 DAQSTATION, Style S4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Gsdpfx Aljy Rcq Hjmobl

Condition: ready for operation (used), Yokogawa DX220-3-2 DAQSTATION, Style S4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Gbsdpey Rcrdofx Almel

Condition: ready for operation (used), Yokogawa DX220-3-2 DAQSTATION, Style S4, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Gbedpfx Aey Rcq Telmjl

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer Gsdsh Dwqhspfx Almsbl SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: used, Year of construction: 2004, Robot ABB Robotics IRB 6600 175/2.8 S4C+M2000 Controller: S4C+M2000 Number of axes: 6 Max. payload: 175 kg Max. working envelope: 2800 mm Year of manufacture: 2004 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Additionally, spare parts are always available from stock. The robot is fully functional and can be inspected at any time. Gbsdpfx Ajy Nihvolmel 2 weeks commissioning guarantee. No further warranty.

Condition: used, A used demountable META shelf rack (5270x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Gedpfx Alew Sxvmomsbl Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid

Condition: used, Year of construction: 1959, Manufacturer: DANLY, Model: S4-800-132-72, Year of manufacture: 1959, Max. pressure: 800 t, Table clamping surface: 3,350 x 1,830 mm, Ram clamping surface: 3,350 x 1,830 mm, Ram stroke: 610 mm, Ram adjustment: 508 mm, Strokes per minute: 12 - 16, Sliding table, Table cushion pressure: 11 - 113 t, Table cushion stroke: 203 mm, Ram cushion stroke: 152 mm, Press control with operator panel, discharge handling robot (manufacturer), Strothmann robot (not functional), control and switch cabinets, accessories Gbsdpfx Aljx R Eftemjl +++ Attention: Machine is part of an online auction! +++

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Gjdpfx Alegay Rlomebl All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Year of construction: 2023, condition: new, SEMIX Mobile 60 S4 is equipped with 1500/1000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. Gbjdpfogaxapox Almol Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: ready for operation (used), Year of construction: 2001, punching force: 31 t, sheet thickness (max.): 5 mm, CNC punching machine manufactured in 2001. This Salvagnini S4-40 features a maximum sheet size of 4064 x 1524 mm and can process materials up to 5 mm thick, including mild steel and aluminum. It includes a versatile H-type punching head with multiple stations for efficient operation. If you are looking to get high-quality punching capabilities, consider the Salvagnini S4-40 machine we have for sale. Contact us for further details. • Punching head: H-type • 40 stations – 70 kN • 4 stations – 120 kN Godpfey H I Atjx Almsbl • 2 rotating stations – 120 kN • 2 lower embossing stations (tonnage to be confirmed) • Sheet capacity: • Maximum sheet size: 4064 x 1524 mm • Minimum finished part size: 250 x 80 mm • Material thickness capacity: • Mild steel (410 N/mm²): 3.5 mm • High strength steel (600 N/mm²): 2.0 mm • Aluminium (260 N/mm²): 5.0 mm • Stainless steel: 3.5 mm • Processable material strength: • 600 N/mm² at 2 mm thickness • 410 N/mm² at 3.5 mm thickness • 260 N/mm² at 5 mm thickness • Electrical data: • Voltage: 400 V • Frequency: 50 Hz • Installed power: 79 kVA • Nominal current: 114 A • Compressed air: 6–12 bar required pressure • Nominal punching force: approx. 300 kN / 30 tons (to be confirmed; exact official records/nameplate data not available) • Recorded hours: 53,019 h (2025 service report) Additional equipment • Loader magazine: MD4015