Used Screwdriving Unit for sale (37,602)

Condition: good (used), Year of construction: 2017, functionality: fully functional, Function tested; item originates from decommissioning of equipment from an automotive supplier Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2–10 A DC Operating temperature: –20 to +70 °C Humidity: 0–90 % non-condensing You can also find the corresponding screw controller in our shop! Kedpfx Ajyq R T Uehionc

Condition: used, functionality: fully functional, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” Kodpfezggx Djx Ahionc Available quantity: > 10 units Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2–10 A DC Operating temperature: –20 to +70 °C Humidity: 0–90 % without condensation You can also find the corresponding screw control unit with us!

Condition: used, WSM Stationary Screwing Unit, Screwing Station Assembly of parts for car radios and navigation systems, as well as testing of these parts. Ksdpfxjibiche Ahijnc The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with a holding (locking) function. In automatic operation, the doors are locked and can only be opened when the automatic cycle is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic cycle cannot be started with the door open. Functional sequence: The station is supplied with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a single unit passing through. In normal operation, all 3 stations work in parallel. - Positioning the unit with the pre-assembled unit in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparing with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the unit onto the belt - Positioning the unit with the pre-assembled unit in station 2.3 - Lowering the light protection cover and establishing contact, positioning the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD and CD slots and buttons - Function test of the CD eject button - Lowering the unit onto the belt > continue If errors occur during the test, they are displayed on the screen and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic cycle, the unit is tested again in the station. If no repair is possible (e.g. screwing error), the unit is marked as NIO (Not In Order) in the control system and is not processed further. A manual NIO marking and removal is also possible. More assembly stations, new and used – find them in our shop! International shipping costs available upon request!

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Ksdpfxs Adl Hrs Ahisnc

Condition: used,

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Knodpohxvu Ejfx Ahioc Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Knjdpfofx Hyfjx Ahioc Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Overall width: 1100 mm Knjdpfozq Uryjx Ahisc Suction capacity: 5750 m3/h No of Filter sleeves: 60

Condition: used, machine/vehicle number: 008705, Overall length: 2099 mm Kedszq Utdepfx Ahionc Overall width: 1138 mm No of Filter sleeves: 16

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Knsdpfx Asz Iyq Tohioc

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Knodpfx Ahoyil A Ssisc Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Location - Poland

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 Kodez Slltopfx Ahisnc • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Knsdpfx Ahjvg U Dxsijc Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Knsdpsz Rqcmsfx Ahijc Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1C968, Very well-maintained, almost new CO₂ refrigeration and freezing system from 2022. The system is being replaced because the company is moving to a larger building, making the complete installation redundant. Specifications: 2 freezing units for a freezing room of 1,000 m². (freezer capacity is 8,000 m³). 3 cooling units for a cooling room of 2,000 m². (cooling room capacity is 8,500 m³). 2 switchgear cabinets. 1 pressure unit/booster compressor unit, including expansion tanks. 1 condenser. This is a complete installation, including all documentation. It will be dismantled and loaded. Knodpfj Aa Rh Tox Ahioc

Condition: used, Year of construction: 2023, functionality: fully functional, 6-axis CNC spraying robot for automatic surface treatment of windows, doors, and other suspended items. Features tracking, automatic color change, and intelligent control of paint and spray pattern. Manufacturer: CML Model: Ghost X Master Year: 2023 Knsdpfx Ao Aazwxehisc Condition: Used machine Max. workpiece dimensions: 3500x2640x150 mm Automatic color change: 5 colors + wash 2 spray guns: Air-mix Graco G40 Tracking: painting on moving workpieces Power: 18 kW Air pressure: 6 bar Workpiece loading/unloading: manual Paint pumps: 5 pcs Wash pump: 1 pc.

Condition: ready for operation (used), operating hours: 418 h, functionality: fully functional, power: 280 kW (380.69 HP), fuel type: diesel, type of cooling: air, Very well-maintained engine, very few hours of use. Knedpfx Aez Sxgiehiec

Condition: used, functionality: fully functional, Year of construction: 2007, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Interface 0-20 mA Knjdpfjzul N Rsx Ahisc

Condition: used, Year of construction: 2021, Motor power: 3kW, protection rating: IP54, max. air flow rate: 2800m³/h, number of filter elements: 2, filter area: 24m², dimensions: 1910mmx1040mmx2200mm, weight: 350kg. The machine was inspected by ESTA in 2021. Inspection by appointment possible. Knjdpfj Aba R Tex Ahioc

Condition: used, mileage: 671,000 km, power: 330 kW (448.67 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater,

Condition: used, mileage: 449,000 km, power: 368 kW (500.34 HP), first registration: 11/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter,

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 Knede Aaaqqopfx Ahioc 400V, 50Hz, 9.8kW, 15A Weight: 130 kg

Condition: used, mileage: 345,779 km, power: 368 kW (500.34 HP), first registration: 11/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater,

Condition: used, mileage: 1,140,000 km, power: 331 kW (450.03 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: semi-automatic, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, SCANIA R450 – FLAT ROOF – RETARDER – TIPPING HYDRAULICS ADR – FULL CAB – SEMI-AUTOMATIC – VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST * VEHICLE HAS LUXEMBOURG DOCUMENTS VEHICLE EQUIPMENT SCANIA R 450 – ADR TIPPING HYDRAULICS – FULL CAB * SEMI-AUTOMATIC WITH CLUTCH PEDAL * RETARDER * CRUISE CONTROL * LANE KEEPING ASSIST * FULL CAB * AIR CONDITIONING * AUXILIARY HEATER * ADR * POWER TAKE-OFF / TIPPING HYDRAULICS * REFRIGERATOR * 1 X SLEEPER CAB * AIR SUSPENSION FRONT AND REAR, FULL AIR SUSPENSION * 1 X TANK * ADBLUE * TIRE SIZE 315/80R22.5 * REAR 315/70R22.5 * GOOD TIRES * EXPORT SALES ONLY WITH A DEPOSIT OF MIN. €500 - €2000 * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 * EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER). 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION. EURO 1 TECHNICAL DATA SHEET. * VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. * FOR SALES TO EU & THIRD COUNTRIES, A DEPOSIT OF AT LEAST €500.00 / €1,000.00 WILL BE CHARGED. * SUBJECT TO CHANGE, ERRORS, AND PRIOR SALE! MORE VEHICLES CAN BE FOUND ON OUR WEBSITE. * SALES ARE EXCLUSIVELY SUBJECT TO OUR TERMS AND CONDITIONS - SEE HOMEPAGE. * IMPORTANT NOTE - IMPORTANT INFORMATION: DESPITE CAREFUL REVIEW OF ALL DETAILS IN OUR OFFER, ERRORS MAY OCCUR. SOME OF THESE ARE CAUSED BY TRANSMISSION ERRORS IN THE SYSTEMS OF THE VARIOUS PLATFORM PROVIDERS. THEREFORE, WE WOULD LIKE TO POINT OUT THAT ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE AND DOES NOT CONSTITUTE A LEGAL CLAIM. * LEGAL: THIS SALES ADVERTISEMENT DOES NOT CONSTITUTE AN OFFER IN THE SENSE OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB). RATHER, IT IS INFORMATION FOR THE PURPOSE OF INITIATING A CONTRACT. THE INFORMATION PROVIDED HERE IS WITHOUT GUARANTEE AND THEREFORE DOES NOT CONSTITUTE ASSURED QUALITIES. Kedpj Aa Ez Iofx Ahionc

Condition: used, mileage: 782,635 km, power: 338 kW (459.55 HP), first registration: 02/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, parking heater, soot filter,