Used Sidel Sbo Blow Moulding Machine for sale (65,412)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams Codsg Ailcspfx Ahmjhc BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data - Capacity: - 7,600 bph on 1.0 L - Formats: Chodpfx Ahjyb Tbpemec - Neck finish 29/21 - Preforms processed: RPET Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Sidel caterpillar oven - 6 heating modules - Sidel preforms tipper - Sidel preforms hopper & feeder - Sidel preforms infeed rail - Sidel caterpillar oven & blowing wheel - Solenoid valves Sidel Universal type - Sidel PCC version V2.02 - Sidel CE electrical cabinet (Siemens) - Service history: - Sidel maintenance completed September 2024 - Elongation sensor retrofitted - Additional service by client’s technicians Scope of Delivery  - Stretch blow-moulder SIDEL SBO 6 Series 2 - Preforms tipper - Preforms hopper & feeder - Preforms infeed rail - Caterpillar oven & blowing wheel

Condition: used, Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. Chjdpfjz Icmwex Ahmsc List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included

Condition: used, Year of construction: 2006, Overview This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data Codpjzxtziofx Ahmshc - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Condition Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Chodpezrhr Aefx Ahmec Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. It is already packed in seaworthy export crates. Techn. Details - Capacity: 7.200 bph in 1,5L - Number of moulds:  6 (molds not included) - Equipped with quick change for shell molds - Number of heating modules: 10 modules - Neck personalization: 29/25      - Working hours: 47.000 only         - Machine was regularily maintained       - Retrofitted by the previous owner in 2020 - Machine equipped with:            Chjdpfxerkgy Us Ahmec - Sidel preforms elevator to unscrambler - Sidel preforms unscrambler & feeder - Sidel oven & blowing wheel for 6 molds - Sidel electrical cabinet - Sidel PCC drive & control panel - Big set of spare parts list upon request

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Chodpfxsnpbhve Ahmjc

Condition: used, Year of construction: 2005, Overview This SIDEL SBO 20 Universal Combi blows, fills and caps PET bottles in one integrated block. The system was manufactured in 2005 and started production in 2006. It is designed for sparkling mineral water and flavoured sparkling mineral water with high CO2 content in 1.0 l, 1.25 l and 1.5 l PET bottles. A HEUFT Spectrum TX 180 fill-level and cap-presence inspector and a single-lane bottle conveyor complete the scope. The machines are still installed and under power and can be inspected by appointment. Technical data Chsdpfxjz A Am To Ahmoc - Current capacity: 28,000 bph in 1.0 l, 1.25 l and 1.5 l PET - Maximum filler speed: 30,000 bph - Application: blowing, filling and capping of PET bottles - Products: sparkling mineral water and flavoured sparkling mineral water with high CO2 content - Neck finish: 26/22 GME 30.40 - Preforms processed: rPET Luxpet - Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height) - Moulds are not included in the scope of supply Scope of Delivery - PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations, quick change for shell moulds | 2005 - Oven | SIDEL | UNIVERSAL | Linear oven with Olicorp, 24 heating modules | 2005 - Blowing Wheel | SIDEL | For 20 moulds, PCC drive, Siemens CE electrical cabinet | 2005 - Transfer Device | SIDEL | Between blow moulder and filler | 2005 - Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves, pitch 113 mm, max. 30,000 bph | 2005 - Capper | Zalkin | HYSTERESIS H6 | 15 heads, quick change of the chucks, cap type 26/22 | 2005 - Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22, tilting device to the capper chute, 42,000 bph | 2005 - Bottle Conveyor | Single-lane conveyor at the combi exit, length to be discussed - Fill Level and Cap Inspection | HEUFT | SPECTRUM TX 180 HBBVXTI60 | Fill level and cap presence control | 2006 - Spare and Format Parts | All available spare parts and specific format parts included Condition Good working condition, still installed and under power. Preventive and corrective maintenance is carried out annually by the in-house maintenance team and, where required, by SIDEL. Driving panels and computer, the electrical and mechanical drawings, service and maintenance manuals and the spare parts books are part of the supply. The equipment is sold as it stands and is to be dismantled. Availability In production until 27 November 2026. Dismantling is planned for week 49/2026, craning out and loading from the beginning of December 2026.

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. Csdpfxsutni Ro Ahmehc The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: new, Parts for the SIDEL blow molding machine bearings O ring Cjdpfxjiqum Is Ahmohc nozzle strap sealing axis

Condition: used, Year of construction: 2009, Overview Chodpfx Ajz Dih Hohmoc Complete PET line for sparkling mineral water and soft drinks. A SIDEL SBO 20 Universal Combi blows, fills and caps up to 30,000 bottles per hour in one block; Krones labelling, shrink packing and palletising complete the line down to the finished pallet. The Combi was built in 2005 and started production in 2006. The Combi stands in Belgium, the downstream machines in Germany. All machines are still installed and can be inspected by appointment. Technical data - Output: up to 30,000 bph (maximum filler speed), 28,000 bph in current production - Containers: 1.0 l, 1.25 l and 1.5 l PET bottles - Products: sparkling mineral water and flavoured sparkling water with high CO2 content - Neck finish: 26/22 GME 30.40 - Preforms processed: rPET Luxpet - Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height) - Blow moulds are not included Scope of Delivery - PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations, linear oven with 24 heating modules, preform feeder, PCC drive, transfer to the filler | 2005 - Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves, pitch 113 mm | 2005 - Capper | Zalkin | HYSTERESIS H6 | 15 heads, quick change of the chucks, cap type 26/22 | 2005 - Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22, 42,000 bph | 2005 - Carbo-Mixer | SIDEL | CARBO-L-D 580/60 | Double-stage deaeration including PFM inline flavour dosing 45 m³/h, max. 60,000 l/h | 2005 - Bottle Conveyor | Single-lane conveyor at the Combi exit - Container Conveyors | SYNCO S | Ground floor and platform level - Fill Level Inspection | Krones | CHECKMAT 731 FM-X+L | 2009 - Inkjet Coders | Domino | DDC 3 | Best-before date coding, two coders - Drying System | Europool | FM TF-02 - Labelling Machine | Krones | CONTIROLL HS 720-15 | Wrap-around labels from the reel | 2009 - Label Inspection | Krones | CHECKMAT 731 EM | 2009 - Tray and Shrink Wrapper | Krones | VARIOPAC PRO FS | 2009 - Tray Coding System | WOLF - Tray Transport System | MULTICO S - Palletiser | Krones | MODULPAL 1A | 2009 - Pallet Transport System | PALCO S Condition The Combi is in good working condition and in production; it is maintained annually by the in-house team and, where required, by SIDEL. Its driving panels and computer, electrical and mechanical drawings, manuals, spare parts books and all available spare and format parts are included. The equipment is sold as it stands and is to be dismantled. Availability The Combi runs until 27 November 2026; dismantling is planned for week 49/2026. The line is available from December 2026.

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Chsdpfx Ahsrazwrsmec - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm Chodpeuiq Dhjfx Ahmec This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Chedekucxljpfx Ahmjc Weight: approximately 6000 kg In like-new condition

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, WE OFFER AN NICE WORKING CONDITION UNILOY MORETTI RETROFITED WITH NEW SIEMENS CONTROLS MACHINE IS WORKING DAILY PRODUCTION FOR TECHNICAL AUTOMOTIVE PARTS MACHINE WAS OVERHAULED IN COMPLETE WITH NEW OPERATIONAL SYSTEM IN 2022 MAIN TECHNICAL DATA - Installed power 130 kW - Heater power 32 kW - Auger diameter 70mm Chedevmd Nwopfx Ahmoc - Power of auger motor 45kW - Closing force 150kN - Plate 450x550 - Closing plate opening from 320 to 620mm - Head volume 3l

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment Chedpfx Ahequuvrsmjc AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. Receiver tank - Low pressure - MAX 16Bar 4. Receiver tank - High pressure - MAX 45Bar

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000 Chjdpfx Ahet Akgwomjc

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Csdpewa Rhrsfx Ahmjhc Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher Cjdpfxjv Iflpe Ahmehc

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Codpfx Ahezfxwiomehc Year of manufacture: 1998 Operating hours: 89,340 h Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, performed by Davies-Standard LTD Net price: 45,000 EUR

Condition: used, Year of construction: 2018, functionality: fully functional, If you have any questions or need more information, feel free to send us a message or give us a call. Cedpfoz D T Aujx Ahmehc

Condition: excellent (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale a slightly used injection blow moulding machine in excellent condition. It is connected and fully operational for demonstration purposes. We can also offer several ready-made molds for canisters and lamp shades. The machine is designed for use with PMMA, PC, PP, and PE resins. Chodpfx Asthk Rzjhmsc

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Chodpfjz Hn Spjx Ahmec

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: S.P.A Magic M.P. Cjdjxxp Tbspfx Ahmohc Model: MGL2D This blow molding machine is fully functional. It is still in production and can be inspected by appointment. Videos can be provided upon request. PRICE REDUCTION!!! From 21,000 to 19,000 EUR!

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit Chodpfx Ahswl Rucemoc The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.