Used Sigma 2-15 Centrifuge Sigma 2-15 Centrifuge + Accessories for sale (94,998)

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type Iedpfexhffrsx Akzebb . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Year of construction: 2009, condition: excellent (used), The centrifuge of the brand Sigma type 1-15 PK is ideal for separating solutions and suspensions of different densities in sample tubes. Technical specifications Voltage: 230 V, 50-60 Hz Power: 630 W Speed: 14000 rpm Ibjdpfx Aepa N R Tekzsb External dimensions (W) x (D) x (H): 35 x 55 x 35 cm Rotor 24 x 1,5/2 ml

Condition: refurbished (used), functionality: fully functional, load capacity: 15 kg, inspected and tested Isdjzvd Tqspfx Akzjbb

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Ibsdpfevvx Hiex Akzob Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: Ibodezk Ek Topfx Akzsb - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted Ibedpfxjzlpv Aj Akzob • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 736043, KUKA KR30L15/2 robot, serial number 736043 is offered with the KRC1 controller. This robot (manufactured in 1998) is ideally suited for automated metalworking and locksmithing applications. The KUKA brand stands for high quality and reliability. With a payload of 15 kg and a reach of approximately 3100 mm, the robot can be used flexibly and can automate a wide range of applications in the industry. The KRC1 controller enables simple programming and operation of the robot. Secure this high-quality KUKA robot for your company now. Used item – normal signs of wear and tear. Further details, article numbers, and images are available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Ibedpfozmtp Njx Akzob Shipping costs to foreign countries are available upon request – please specify country, city, and postal code. Freight costs are available upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 736042, KUKA KR30L15/2 robot, serial number 736042, is offered with the KRC2 controller. This robot (manufactured in 1998) is ideal for automated metal processing and metalworking. The KUKA brand stands for high quality and reliability. With a payload of 15 kg and a reach of approximately 3100 mm, the robot is flexible and can automate a wide range of applications in the industry. The KRC1 controller enables easy programming and operation of the robot. Secure this high-quality KUKA robot for your company now. Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Iodpszmr Abjfx Akzebb Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Isdpfoxhfpdsx Akzsbb Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, Year of construction: 2006, A production line with 3 KUKA KR 150-2 industrial robots for the production and handling of molded parts is offered. Rated payload per robot: 150kg, max. reach: 2700mm, 6 axes, pose repeatability: +/-0.06mm, protection rating: IP65, mounting position: floor/ceiling, axis speeds: A1: 110°/s, A2: 110°/s, A3: 100°/s, A4: 170°/s, A5: 170°/s, A6: 238°/s, motion ranges: A1: +/-185°, A2: 0° to -146°, A3: +155° to -119°, A4: +/-350°, A5: +/-125°, A6: +/-350°. Including peripheral equipment and accessories. Weight per robot without controller: approx. 1245kg. The production line was used, among other applications, for the production of plant containers and is ideally suited for processes involving plastics as well as processed fiber-based bio-residues and residual materials. It is particularly designed for molding, pressing, handling and automation processes. Inspection by arrangement. Ibsdpezu Ndxsfx Akzsb

Condition: good (used), Vitap automatic through-hole drilling machine 4 lower heads 2 horizontal heads Ibjdpfx Akjn Hq Snszeb

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, *Wemhöner Variopress Model Basic 1000 Plus/Pin – Year of manufacture 2008 *Very good condition, little used *Type KT-MB-28/15-240 *With automatic pin system and inline rotating table *2 tables with automatic Vario-Pin system *With Teflon coating for pre-glued foil *Foil laying system for pin table (pre-glued foil) *Heating plate size: 2800 x 1500 mm *Max. workpiece size: 2,540 x 1,250 mm *Membrane: Yes *Cutting station *Foil storage paternoster, 3.2 m high, with 14 hanging rods *PLC control: Siemens S7 *Operator panel for the PLC control: SIEMENS TP 270 (touchscreen) Ibjdpfexbcudex Akzeb *Automatic membrane tensioning *Installed power supply: 38.5 kW *Max. chamber pressure: 6 bar *Max. press opening: 150 mm *6 cylinders with Ø 125 mm *Operating voltage: 400V 50/60Hz *Height of the press chamber: 40 / 60 mm *Max. press force: 2400 kN *Operating pressure of the hydraulic system: 320 bar

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Isdpfx Asxmt Eqokzjbb

Year of construction: 2003, condition: ready for operation (used), Plastic processing machine manufactured in 2003. This DREHER S 42/65 GFS-15 GR features a powerful 45 kW drive motor and a working width of 650 mm. It includes a protective soundproof enclosure and a granulator function, along with various additional equipment such as a Z-conveyor belt and a discharge extraction station. If you are looking to get high-quality plastic processing capabilities, consider the DREHER S 42/65 GFS-15 GR machine we have for sale. Contact us for further details. - Drive Power: 45 kW- Motor Speed: 1,470 rpm- Motor Specifications: VEM motors GmbH, 45 kW, 400/690 V, 50 Hz- Rotor Diameter: 420 mm- Working Width / Rotor Width: 650 mm- Feed Opening: approx. 420 × 650 mm- Rotor Cutting Bars: 5 pieces- Stator Cutting Bars: 2 pieces- Enclosure / Features: Protective / soundproof enclosure, granulator function - Additional Equipment & Accessories: - Rotor Feature: Auxiliary flywheel fitted- Soundproof Booth: Segmented steel construction with 100 mm mineral wool insulation, forced ventilation fans, 3 access doors- Discharge & Extraction Station: Granulate extraction fan (5.5 kW motor, 230/400 V), cyclone ZA 160 with pneumatic material diverter, dust filter- Spare Parts: 1 extra set of cutting blades (5 rotor cutting bars, 2 stator cutting bars) Ijdpszwg Efsfx Akzjbb

Condition: good (used), Year of construction: 2000, functionality: fully functional, Control: Heidenhain TNC 426 Year of manufacture: 2000 Travel X-axis: 800 mm Travel Y-axis: 480 mm Travel Z-axis: 580 mm Tool changer: 50 stations Tool holder: SK 40 Spindle speed: 12,000 rpm Ijdpfx Aey R Ak Hskzjbb Coolant through spindle (IKZ) Chip conveyor * approx. 15,855 operating hours

Condition: used, Year of construction: 1996, total height: 2,570 mm, total length: 3,520 mm, total width: 2,350 mm, Empty weight: 6.000 kg Price: On request - Year: 1996 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: M2058 - Drive system: CNC - Number of axes [pcs]: 3 - X-axis travel [mm]: 750 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 450 - Table length [mm]: 900 - Table width [mm]: 420 - Min. spindle speed [rpm]: 40 Iodpfx Akew Slaxezjbb - Max. spindle speed [rpm]: 8000 - Transport dimensions: 3520mm x 2350mm x 2575mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), * Surface: 6000 x 1500 mm - 2 Deck * Screen opening Upper Deck: [] 35 mm * Screen opening Lower Deck: [] 20 mm * Driving: E-motor 11 kW Ibjdpfoywnb Rjx Akzjb

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 131 720, total height: 4,120 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 2,600 mm, total length: 3,600 mm, drop-through hole in table: 1,200 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 160 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 650 mm, distance between stands: 1,600 mm, overall weight: 35,000 kg, control voltage: 24 V, input frequency: 50 Hz, ATTENTION: The machine is currently partially disassembled. The control panel and switch cabinet have been scrapped. Components can be inspected. Before delivery in 2026/2027, the machine will undergo a complete mechanical and electrical overhaul. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Working height: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm Ijdpfx Akozrxbujzebb The machine is currently not operational.

Condition: ready for operation (used), * Brand: IBAG Iodpfjywl Sajx Akzsbb * Surface: 4500 x 1500 mm - 2 decks

Condition: ready for operation (used), * Brand: Haver & Böcker * Dim. screen: 4000 x 1500 mm – 2 decks * Incl.: E-motor and springs. Ijdpfxeywnfvs Akzjbb

Condition: used, Year of construction: 2013, Year of manufacture: 2013 Ibjdpfozrglzjx Akzob 240 V, IP 65 Operating pressure: 6-8 bar

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Cannot be tested. Ijdpfx Aezqux Tekzjbb Collection only.

Condition: used, Year of construction: 2009, total length: 2,550 mm, Tugger Mafi MTE 2/15 Drive Electric Year built 2009 Ibodjy E Ubgjpfx Akzsb

Condition: used, Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder Isdpslmrkzjfx Akzsbb -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg

Condition: used, Year of construction: 2009, total length: 2,850 mm, Tugger Mafi MTE 2/15 Drive Electric Year built 2009 Ibodpjyfiffofx Akzsb