Used Single Head Wire Drawing Machine for sale (72,409)

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Ppodpfx Aget Ixkzo Dor

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Ppedpopl Tgmefx Ag Dor Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps Ppjdpfx Agehrukis Djr - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock Psdpfehrumajx Ag Depr - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: new, Year of construction: 2024, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: Pedpfswh Rlgjx Ag Dopr - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. Ppedpoyubh Rjfx Ag Der The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Ppsder Nfvmjpfx Ag Dor Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Ppsdpfx Agsyxxy Hj Djr

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Ppedpfx Agjylbrdj Dsr

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ppsdpfx Agen Apnts Dor On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1994, condition: used, Dimensions: Ppsdpfx Agolp Iibe Der H = 1600 mm L = 1200 mm D = 1100 mm

Condition: used, Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine -Voltage: pneumatic Psdpfx Agjb A Ivmj Dspr -Weight: 270 kg

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Pjdjwi Tidspfx Ag Depr Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Podpfxewi S Ixe Ag Djpr Location: Europe

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Depth: 1500 mm, Max. Height: 1550 mm, Ppedpfx Aom Rg Npeg Dsr Weight: approx. 220 kg.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,751 h, functionality: fully functional, drawing speed: 20,000 mm/s, wire diameter (max.): 3 mm, Wire drawing machine with integrated steel fiber machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil uncoilers: 2 Wire drawing machines: 2 Steel fiber machines (integrated): 2 Cooling system (liquid): 1 unit General information Control system: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power including coiler: 150 kW Power supply: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire drawing system Input wire diameter: 2.2 – 3.0 mm Output wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 – 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Diameter of all capstans: 450 mm Motor power per capstan: 18.5 kW Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20–30 °C Compressed air requirement: 5 bar Cooling: Water (for matrix, capstans, blocks, and nozzle holders) Equipment: Drawing die holder Adjustability: Adjustable in all directions (up, down, left, right) Integration: Combined with soap box Die housing: 43 x 27 mm Sensors and measurement technology Sensor arm: Analog sensors Length measurement: Shaft encoder for length and speed measurement Cooling Cooling medium – matrix: Water Cooling medium – drawing blocks: Water Water consumption: approx. 17 m³/h Water pressure: 2–3 bar Water temperature: 20–30 °C Water inlet: Left side of the machine Water outlet: Right side Machine side Compressed air Compressed air requirement: 5 bar Drives Motor type: AC motors with IP55 protection Speed control: Frequency converter from Control Techniques Motor power per drawing block: 18.5 kW Motor for matrix holder: 0.3 kW Control system Control system: Siemens PLC Control unit: Industrial-grade touch panel (Siemens) Ppsdpowmnhvjfx Ag Dor Electrical cabinet Construction: Sheet metal housing with high protection rating Cooling: Air-cooled Protection rating: IP55 Electrical system Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Color Machine body: Blue Moving parts: White Matrix holder: Black Control cabinet: White Integrated steel fiber machine (ISFM) Applicable wire diameters: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronized) with drawing line) Fiber types: Hooked, corrugated, flat (tool-dependent) Fiber motor power: 7.5 kW Fiber length: tool-dependent Packaging: Manually in bags or boxes on weighing pans Fiber tool: Specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ EQUIPMENT - Two MBK-8/8x450 wire drawing machines - Two ISFM integrated steel fiber machines - Two coil unwinders - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fiber filling switchover

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Ppsdpfxeucpqto Ag Der Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Podsymn Hwepfx Ag Dopr You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Ppedpfx Agsxvwcxs Dor Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, Key Facts: Lachenmeier Hood Stretcher Pallets per Hour: 50+ Frame Size: 3,000 x 2,400 mm Max. Load Height: 1,500 mm Max. Load LxW: 1,200 x 1,000 mm Stretch Hood Film: 1 Special Features: refurbished stretch hood machine long-lasting spare parts by RHM Packaging Podovb Tz Eopfx Ag Depr Availability Now in stock at RHM

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Ppodsyz Rxaopfx Ag Dor Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350900, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 400 mm Travel U-axis: 400 mm Pjdpfx Agoyz Rvlj Djpr Travel V-axis: 250 mm Workpiece weight: 1,000 kg Workpiece height (max.): 400 mm Workpiece width (max.): 500 mm Workpiece length (max.): 850 mm Taper angle: +/- 30° at 400 mm height MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,600 x 2,230 mm Machine weight: 2,500 kg Standard wire guides: 0.25 mm EQUIPMENT Collision protection in X/Y/U/V/Z

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 02DC2563, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, The machine will remain in operation until 08/04/2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 310 mm U/V-axis travel: 150 mm Max. workpiece weight: 1,500 kg Maximum workpiece dimensions: 1,050 x 820 x 305 mm Taper angle (workpiece height): 15 mm / 260 mm or 30 mm / 110 mm Podpeyzh Daofx Ag Dspr Table dimensions: 840 x 560 mm Possible wire diameters: 0.10 - 0.30 mm Wire spool capacity: 10 kg MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,687 x 3,030 x 2,150 mm Machine weight: 3,500 kg EQUIPMENT Hardened 3-sided table

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Ppedpfxsy Ed E Ij Ag Djr Travel Z-axis: 430 mm Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Travel range Z-axis: 220 mm Psdpsy Emxqofx Ag Djpr Travel range U/V-axis: 120 mm Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Machine weight: 2,700 kg