Used Single-Column Eccentric Press, Eccentric Punching Press for sale (23,760)

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Fgsdpfx Aoi Db Ibjccec Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Fgjdpfxox U Eias Accsc Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm Fedpfx Aek S Htxsccsgc - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation Fgedpfx Acefim Thocjc - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Fgedpfx Ajv Tp D Hjccec Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS Fgjdpsdzqddjfx Accec - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, pressure:10 T throat:180 mm stroke:8-60 mm no. of strokes:180 Hub/min table surface area:400 x 340 mm Fgodpfx Acjcxxygecjc table height over floor:935 mm hole in the table:80 mm ram - range of adjustment:40 mm ram surface:180 x 110 mm total power requirement:1,1 kW weight of the machine ca.:0,6 t dimensions of the machine ca.:1,2 x 1,5 x 2,0 m

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Fodpfx Acofx Hv Hjcsgc hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm stroke:8-100 mm no. of strokes:140 Hub/min table surface area:820 x 630 mm table height over floor:800 mm Fjdpscxxmfsfx Accogc ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm total power requirement:7,5 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm Fgsdpfx Aocxxrhoccec stroke:20-120 mm table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t

Condition: used, pressure:70 t throat:250 mm stroke:10 - 120 mm table-size:750 x 500 mm dayligth:350 mm ram adjustment:350 x 200 mm no. of strokes:50 Hub/min daylight:310 x 370 mm Fgedpocxxttjfx Accoc total power requirement:5 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:1,3 x 1,4 x 2,5 m tilting eccentric press, tie-rod design with UVV movable protective screen, pneumatic clutch, quadruple led tappet, separate electric cabinet, central lubrication, electric two-hand operation, emergency cut-off

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm Fedpfx Aecxxwcoccsgc ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm Fedpfx Ascxxx Hoccjgc ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: used, Year of construction: 1994, punching pressure:20 t total power requirement:4 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:3,2 x 1,4 x 1,45 m punch diameter:max. 105 mm sheet thickness - max.:6 mm Fedpsh Ra Rnsfx Accjgc stroke length max.:25 mm voltage:380 V frequency:50 Hz connected load:4 kVA punch diameter:105 max. mm input unit:0,01 mm

Condition: used, Year of construction: 1997, pressure:40 t throat:280 mm stroke of slide:8-120 mm no. of strokes:120 Hub/min Fgjdpfxocxxmgo Accjc throat:280 mm daylight:350 mm dayligth:270 mm table-size:710 x 565 mm ram surface:500 x 280 mm total power requirement:2,2 kW weight of the machine ca.:3,2 t

Condition: used, Year of construction: 1962, pressure 080 t throat 300 mm stroke 8 - 112 mm no. of strokes 60 /min Fgjdpfxoyq Smij Accjc distance table/ram, max. stroke up, adjustment up 467 mm table surface area 710 x 560 mm hole in the table 240 x 115 mm table height over floor 800 mm ram surface 400 x 315 mm ram adjustment 80 mm power requirement 7,5 kW weight 5,1 t dimensions (WxDxH) 1,4 x 1,9 x 2,7 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t Fjdjyq Sl Sspfx Accjgc dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm ram adjustment 63 mm Fjdpfxjvuuc Rs Accjgc power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1957, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck Fgjdpfx Ajvzxnwjccjc

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm Fodpfxev Az T Se Accjgc total power requirement 4 kW weight of the machine ca. 3850 kg dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - new braeke plate - current press inspection

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Fsdpjiuxwqjfx Accsgc Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t Fsdpou Nfklefx Accogc dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m Fgodpfeu N Ddwjx Accec - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! Fgjdsu N Dfhspfx Accsc i.D. *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm Fjdju Nfizopfx Accjgc ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *