Used Speed Controller for sale (66,947)

Condition: good (used), This device is used for stepless speed control. Suitable for pumps, blowers, fans, etc. Connection cable approx. 3 m. Input voltage: 230 V/50 Hz. Height: 80 mm Lhedpfxoz Rpp Eo Amzjn Depth: 75 mm Width: 120 mm Weight: 764 kg Condition: good, second-hand

Condition: excellent (used), functionality: fully functional, total length: 160 mm, total width: 30 mm, overall weight: 70 kg, type of input current: three-phase, Dimensions of the treadmill belt: Length: 160 cm Lodpfx Aoztfnqsmzshn Width: 30 cm Speed control

Condition: good (used), Potentiometer, controller, motor controller, speed controller -Controller: speed controller -Type: S101A Lhjdpfsy Ed H Eex Amzon -Number: 11x controllers available -Price: per piece -Dimensions: 160/110/H100 mm -Weight: 0.8 kg/pc.

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210198, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2026, Equipment: documentation/manual, F2000 HS - HIGH SPEED AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 220 mm - max. 600 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 1200 cartons/min (depending on length and quality of the cartons) - Motorized carton magazine: 120 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photoelectric sensor - Venturi vacuum system: 25 m3/h, 700 mm HG - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Protection class IP 54 - Compressed air 6 bar - Air consumption 22 nl - Operating environment +5° C - max. +35° C - Working height 650 mm, adjustable +30 mm - Weight 1,160 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection The system includes a GEM B52HS carton sealer. GEM B52HS CARTON SEALER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ mm - Width: min. 150 mm - max. 670 mm - Height: min. 100 mm - max. 670 mm TECHNICAL DATA: - Drive and guide belts, vertical - Carton format adjustment, manual - Sealing unit, bottom - Standard version T22 / T23 - Adhesive tape width: 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm Lhjdjz Dwz Iepfx Amzon - Adhesive tape roll core: 76 mm - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Consumption 0.25 kW - Protection class IP 54 - Operating environment +5° C - max. +35° C - Transport speed 22 m/min - Average production 1000 cartons/hour - Working height 650 mm - Weight 120 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The image may contain optional features that incur an additional cost.

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Lhsdjz Rwpyjpfx Amzjn Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: used, Year of construction: 2014, operating hours: 4,908 h, machine/vehicle number: LC658, Used Tetra Pak A3 Speed V40 250ml Prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak aseptic carton solution centered on the A3 Speed filler. Engineered for industrial packaging and beverage production, it delivers high output with precise handling of Prisma cartons. All core modules share the same manufacturing year, providing a cohesive and modern second hand system suitable for efficient aseptic operations.Production speed: up to 24,000 packages/hourPrimary format: 0.25L Prisma cartonContainer type: Carton (aseptic brik)Filler: Tetra Pak A3 Speed, version 040V, year 2014, working hours 4,908Accumulator: Tetra Pak ACHX 30, version 070V, year 2014, working hours 5,528Straw applicator: Tetra Pak SA30, version 040V, year 2014, working hours 5,821Case packer: Tetra Pak CBP30 Speed, version 030V, year 2014, working hours 38Filling process: Aseptic carton fillingManufacturer: Tetra PakAdvanced Automation & Control SystemsThe line combines Tetra Pak engineering across all modules for synchronized operation and high uptime. Centralized operator interfaces and coordinated control logic simplify start-up, ramp-up, and stop sequences, while ensuring consistent product and package quality across the filling, straw application, accumulation, and case packing stages. Format handling for 0.25L Prisma cartons is streamlined with fast, repeatable adjustments and clear operator guidance.Integrated line control for coordinated speeds and bufferingOperator-friendly HMI on core equipmentAutomated interlocks across modules for safe operationRecipe-based format management for 0.25L Prisma cartonsProduction Line Integration CapabilitiesDesigned as an inline solution, this used bottling line accommodates continuous flow from aseptic carton filling to secondary packaging. The accumulator provides essential buffering to keep the filler running during short downstream stops. The straw applicator and case packer complete a compact, high-throughput configuration for beverage production.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed (040V)2014Various EquipmentStraw Applicator Tetra Pak SA30 (040V)2014Various EquipmentAccumulation System Tetra Pak ACHX 30 (070V)2014Case PackerTetra Pak CBP30 Speed (030V)... Lodpfx Amszmpzbjzshn

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA Ledpfx Ae Aayf Iomzohn - Equipment: chip conveyor

Year of construction: 1968, condition: used, Offered is a cam-controlled automatic lathe with bar feeder. Main spindle bore: Ø 60mm. Spindle speed: 160-1600rpm. Speed steps: 11. Distance between centers: 340mm. Center height: 125mm. Equipped with mechanical collet and bar feeder. Inspection possible by appointment. Lsds Aba Swopfx Amzshn

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 min/-1 Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Lsder Dvqzjpfx Amzjhn Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: used, power: 20 kW (27.19 HP), For inquiries regarding the attachment, please contact Mr. Herden (at the telephone number provided). Weber TRC 86 - Compaction Roller - Year of manufacture: 2020 - with radio remote control - 143 operating hours Price: 14,890.00 € net / 17,719.10 € gross Operating weight according to CECE: 1,390 kg Tire width: 854 mm Compaction force: 75 kN Ledeznrwhopfx Amzohn Frequency: 32 Hz Amplitude: 1.70 mm Average static line load CECE: 9.80 kg/cm Climbing ability: 50% depending on the ground Working/travel speed: m/min depending on the ground Drive system: hydrostatic, four tires Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine power, max.: 19.5 kW / 26.7 hp Engine power at operating speed: 15.6 kW / 21.3 hp at 2600 rpm The machine has a radio remote control. The remote control is charged in the roller. Upon request, we will also provide you with a financing offer. We are the official Westtech sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Holp sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official Magni telehandler sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Year of manufacture: 2020 Operating hours: 143 Unladen weight: 1,390 kg Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 201001071, For sale is a universal lathe, VDF Boehringer DUS 400 ti. The machine is in very good condition. It combines the flexibility of a conventional lathe with the precision and speed of a CNC machine (teach-in method). Technical data at a glance: • Manufacturer: VDF Boehringer (Germany) • Model: DUS 400 ti • Year of manufacture: 2004 • Control system: Heidenhain • 3-jaw chuck • Center distance: 250 mm • Distance between centers: 1000 mm • Quick-change tool post • Tailstock • Adjustable protective guard Accessories: • Workbench with mounted vise • Telescopic drawer cabinet (7 drawers) • Tool cabinet (Bedrunka + Hirt) Contents: • Hand tools, turning tools, holders, general turning accessories Attractive offer – flexible & worry-free We offer not only a high-quality product but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. Ledpfx Ae Ad Abajmzohn If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: good (used), Year of construction: 1999, Maximum distance between centers 250 mm Distance between centers 1500 mm Spindle bore 63 mm Spindle mount, DIN 55027 Size 6 Spindle speeds (2-speed, stepless) 1 - 650 / 1 - 2,500 rpm Feeds (X/Z) 5000 mm/min Rapid traverse (X/Z) 7 / 6 m/min Lhodsz Icrgopfx Amzjn Taper in quill MK 5 Quill stroke 160 mm Quill diameter 70 mm Drive power 16 kW Machine dimensions L x W x H 3200 (length without chip conveyor) x 1800 x 1400 mm Machine weight 3200 kg Accessories / Special features: • Cycle control: HEIDENHAIN Manual Plus o Color screen o The machine can be operated manually using electronic handwheels and a position display, or with o CNC 2-axis cycle control MANUAL PLUS o 2D simulation, fast and reliable control o RS 232 interface o Graphically supported, dialogue-based programming o A color screen displays the current axis positions with residual value display, as well as the input of cutting data, cutting speeds (also constant), target points (absolute & relative) with graphical cycle check and simulations. Pre-programmed work cycles for complex shapes with curves or chamfers, thread or grinding cycles according to DIN; threads (metric, multi-start, tapered threads), boring and grooving. • 3-jaw chuck, diameter 250 mm • Chip conveyor • Hardened and precision-ground bed guides, main spindle, gears and shafts • Chuck guard, electrically protected • Quick-change tool holder system „MULTIFIX“ Size C • Protective guard with safety device, laterally sliding • Manual tailstock • Coolant system • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning machine with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 1 large steady rest, and articulated chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Ledpezfqdnsfx Amzshn Center height: 350 mm Distance between centers: 4000 mm Swinging diameter over bed: 690 mm Swinging diameter over cross slide: approx. 420 mm Swinging diameter in the gap: 870 mm Spindle speeds: 0 – 2400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine dimensions + chip conveyor L x W x H: 7350 x 2450 x 2050 mm Machine weight: 6,800 kg Accessories / special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 1 unused fixed steady rest with rollers, inner diameter approx. 380 mm • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New FAGOR servo controller for main spindle control, repair costs €4,950.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1999, turning diameter 800 mm turning length 2000 mm control MONFORTS Lhjdpfx Ae Adu S Dsmzsn control Control System MTC-K centre height 400 mm centre distance 1970 mm swing over bed 830 mm swing diameter over slide rest 540 mm spindle bore 135 mm face slide travel 450 mm spindle turning speed range 2 - 1600 U/min transmission ratio 4 feed power X/Z axis 11,3 / 23,9 kN rapid traverse X-axis 4 m/min rapid traverse Z-axis 6,8 m/min tailstock quill diameter 125 mm tailstock quill stroke 200 mm tailstock taper MT 6 total power requirement 53 kVA weight of the machine ca. 6 t dimensions of machine L x W x H 4,35 x 2,17 x 2,10 m Accessories: 3-jaw chuck 630 mmø, MULTIFIX head "D", various tool holders, chip conveyor, coolant

Condition: used, Mitsubishi Type: RH-3FH5515-1D1-S15 + CR751-03HD1-0-S15 Mitsubishi Industrial Robot Lodpfx Amozd Tutjzohn Payload (kg): 3 Degrees of Freedom: 4 Speed (mm/s): 7200 Repeatability (mm): 0.01 Cycle Time (s): 0.44 Max. Reach Radius (mm): 400 Operating Range J1 (degrees): 264 Operating Range J2 (degrees): 282 Operating Range J4 (degrees): 720 Stroke of Z-axis (mm): 180 Controller Type: CR751-D Protection Class: IP20 Power Supply: 1 Phase (VAC) 200-253 Power Consumption (VA): 500 Product Dimensions & Weight Width (mm): 130, Height (mm): 511.5, Depth (mm): 580 Weight (kg): 14 Condition: used Scope of Delivery: (See Image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Ljdpjzh U Tfjfx Amzshn Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, CNC turning machine MONFORTS Type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control FANUC Series 18i-TB Swinging diameter over bed 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 Volt, 50 Hz, 63 Amp. - hydrostatic guideways for the X, Y and Z axes - with tailstock, chuck and collet chuck - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Lodpfozfau Aox Amzjhn Footprint of the machine with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: new, Description The PERZL log grapple RZ 180 is a high-quality tool equipped with a radio-controlled cable winch and a protective guard. It offers an opening width of 1,800 mm and is ideal for use in forestry applications. The log grapple has a pulling force of 1.7 t and is equipped with a 40 m long, compacted steel cable with a breaking load of 3.4 t. The grapple is standardly equipped with a 3-point hitch, as well as upper and lower link pins, and features two double-acting hydraulic connections and a feed line with return line for the cable winch. Made from high-strength fine-grain steel QSTE700, it offers a closing force of 9.5 t at 180 bar and can swivel approximately 98° in both directions. The radio-controlled winch requires a 12 V power supply from the tractor and has a cable speed of approximately 0.5 m/s. With a weight of approximately 60 kg (without the log grapple) and an overall grapple width of 1,000 mm, overall length of 1,220 mm, and overall height of 2,300 mm, the log grapple is robust and functional. A quality product from PERZL, manufactured in Germany. - Log grapple with radio-controlled cable winch and protective guard - Equipped with a 40 m cable, pulling force: 1.7 t - Standardly equipped with a 3-point hitch - Upper and lower link pins - 2x double-acting hydraulic connection for the grapple - 1x feed line with return line for the cable winch - Made of high-strength fine-grain steel QSTE700 - Quality product from PERZL, manufactured in Germany Technical data of the radio-controlled winch: - Radio-controlled cable winch incl. receiver & handheld transmitter (12 V power supply from the tractor required) - Pulling force 1.7 t - Incl. 40 m / 7 mm compacted steel cable, breaking load 3.4 t - Cable speed approx. 0.5 m/s - Protective guard - Weight approx. 60 kg (without the log grapple) Closing force: 9.5 t at 180 bar Smallest diameter: 80 mm Lhjdpfj Ab S Ahjx Amzjn Width in closed condition: 1,000 mm Swivel range left and right: 98° Length in closed condition: 1,300 mm For tractors from: 75 HP Opening width: 1,800 mm Height: 1,300 mm

Condition: new, Description The PERZL RZ 180 is a high-quality forestry grapple equipped with a powerful radio-controlled winch. The grapple has an opening width of 1800 mm and is ideal for use in timber harvesting. It is supplied without a protective guard and is fitted as standard with a 3-point linkage and upper and lower pivot pins. The grapple features two double-acting hydraulic connections and a feed line with return line for the winch. The radio-controlled winch has a pulling force of 1.7 tons and provides additional power with a 40 m long, 7 mm thick steel cable, which has a breaking load of 3.4 tons. Its cable speed is approximately 0.5 m/s. The grapple itself is made of high-strength fine-grained steel QSTE700 and offers a closing force of 9.5 tons at 180 bar. With an unladen weight of 430 kg, it measures 1,000 mm in width, 1,220 mm in length, and 2,300 mm in height. This quality product is manufactured in Germany and meets the highest standards of efficiency and robustness. - Forestry grapple with radio-controlled winch, without protective guard - Equipped with a 40 m cable, pulling force: 1.7 t - Standard with 3-point linkage - Upper and lower pivot pins - 2x double-acting hydraulic connection for grapple - 1x feed line with return line for winch - Made of high-strength fine-grained steel QSTE700 Ledpfx Ao Ab S Ansmzshn - Quality product from PERZL, manufactured in Germany Technical data radio winch: - Radio-controlled winch incl. receiver & handheld transmitter (12 V power supply from the tractor required) - Pulling force 1.7 t - Incl. 40 m / 7 mm compacted steel cable, breaking load 3.4 t - Cable speed approx. 0.5 m/s - Unladen weight approx. 60 kg (without forestry grapple) Swivel range left and right: 98° each Closing force: 9.5 t at 180 bar Length in closed condition: 1,300 mm Smallest diameter: 80 mm For tractors from: 75 hp Width in closed condition: 1,000 mm Opening width: 1800 mm Height: 1,300 mm

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Lhodpfxsziyqro Amzen Interfaces: Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, Denso Ledpfx Aezd Ubzjmzjhn Type: Denso 6-axis robot VS-087 / Controller 410200-2611 A VS087-AV6-C3N has a cleanroom class 3 protection rating. Denso industrial robot with Denso controller. Industries and applications: The VS-087 series offers high speed and high performance in a compact, streamlined housing. In addition, numerous options are available, enabling operation in a wide variety of environments. Thanks to its high-speed performance, accuracy, and the wide range of available options, the VS-087 can be used in almost all areas, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. The robot model can be used for assembly, inspection, alignment, material handling, material maintenance, packaging, palletizing, and custom applications. Denso 6-axis robot VS-087 with Denso robot controller 410200-2611. The compact model impresses with outstanding performance and speed. Robot model VS-087A4-AV6-C3N-ANNDN-NNNN Arm reach: 905 mm Payload: 7.0 kg Cycle time: 0.34 sec Repeatability: ±0.03 mm Weight: 51 kg Year of manufacture: 2016 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, Ledpfx Aoy A H Tpemzehn spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor Ljdoxxig Uepfx Amzjhn *

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides Lhjdpfxoyy Nlpe Amzsn • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Autotherm Type: Autotherm temperature control unit AWF 130-27/VK/6K 6-circuit temperature control unit Without active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1x temperature control in the main circuit Includes 6x temperature measurement in each supply line Includes 6x temperature measurement in each return line Includes 6x flow rate and pressure measurement in each supply line Includes 6x flow rate and pressure control 1 l/min .. 12 l/min and 0.1 bar … 3 bar Including changeover control Including frequency inverter-controlled pump in the main circuit Including 6x 3-way valve Includes 6x additional relief valve 2 … 12 bar, adjustable Preset to 2.4 bar Includes filling and draining device For all circuits, jointly/simultaneously Including 50-liter integrated tank Including pneumatic drain function Including S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated into the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C chilled water network. The cooling capacity at a supply temperature of +20°C is: 50 kW. This increases the cooling speed in this temperature range and saves Lhjdjzd Rtyspfx Amzjn energy due to the shorter running time of the refrigerant compressor. (The footprint of the base unit increases by approx. 0.3 m² according to the data sheet). Assembly in Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, separate enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply. Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated. For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Sold ex-works! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.