Used Spinning Machine Leifeld - Plb 1200 for sale (69,160)

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Iiodpfx Amjxtaxwjgjh Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Isdpfxovcfhme Amgjih Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: good (used), Working diameter Ø 2400mm Iedsucdh Tspfx Amgjih Max sheet thickness: 9,5 mm

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Distance between the centers Iiedpfx Aoq Dqdiemgsh 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1980, Spinning machine LEIFELD Iedpfx Amex Ttplsgsih Spinning moulds

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, total length: 4,200 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,000 rpm, total height: 2,800 mm, total width: 2,300 mm, overall weight: 13,000 kg, power: 28 kW (38.07 HP), New Hydraulic hose New Sealings New Covers Optional Retrofitting possible   New Controller  New SPS - SIEMENS  Main Power 28 kW Steel telescopic covers CE-Safety fence with door    Optional tooling for Parabolic 1200 mm Old owner machined 3 mm aluminum parts  Commisioning, Training, Tool, Installation Possible !! Max. blank / workpiece over bed:1500 Centre height over bed: 750mm Distance between centers: 1225mm Maximum sheet thickness: 7mm Stroke X-Axis: 360mm Stroke Y-Axis: 800mm Speedrange: 100 - 1000Rpm Iiodozvf N Topfx Amgjh Power: 28kW Spindle taper head stock: 11DIN / Camlock Stroke pinole quill: 300mm Length: 4200mm Width: 2300mm Height: 2800mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 Ijdoxp Sb Aspfx Amgoih - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM Iiedpfx Asy Splgemgsh • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Iisdpjzrkwnofx Amgoh

Condition: used, Year of construction: 2016, total width: 2,500 mm, total length: 4,500 mm, total height: 2,300 mm, overall weight: 9,000 kg, LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 Iijdpfx Amsz E T Tvegeh - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H Weight approx.: 9,000 kg Control: Sinumerik 840 D SL Dimensions (LxWxH) approx.: 4500 x 2500 x 2300 mm Powered tools: Yes Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Ijdpfxeyzxyxj Amgsih Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, quill stroke: 300 mm, overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, Hand spinning machine, make Schulte Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2000 rpm (stepless adjustment) Spindle mount: M 36 Manual tool rest Tailstock stroke: 300 mm (quill travel via handwheel) Machine weight approx.: 800 kg Machine description: Ijdpfx Aexp Sc Hsmgeih - Powerful, robust spinning machine - Overhauled and ready for operation - Main spindle newly bearing-mounted - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control - Newly painted

Condition: used, Dinnissen Dima 1200 bag emptying machine bag cutting machine stainless steel Machine has been overhauled. Equipped with new running wheels, bearings, clamps, etc. Capacity: 1200 bags/hour Completely made of stainless steel Drum motor power: 2x 1.5kW 124rpm Cutting rotor motor power: 2x 5.5kW 211rpm Cutting chamber with double rotor is mounted on top of the infeed hopper of the drum sieve Iodpfox D U Nljx Amgjih See our other advertisements VMA Wekerom

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type negotiated Description Ijdpfecudizsx Amgsih Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Iiedpfx Aezuc T Tjmgsh Specifications, information, price, images, etc. can be found in the PDF documents attached.

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: Iiedpfx Asw Rldzemgjh - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload Isdpfx Amszt Ai Ejgsih professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Year of construction: 1998, condition: used, Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible. Iiodpfsz Dkirjx Amgsh

Year of construction: 2003, condition: used, Number of spindles: 5, ring diameter: 200mm, bobbin length: 550mm, compressed air connection: 6-8bar, compressed air consumption: 0.5l/s, voltage: 380V, frequency: 50Hz, connected load: 6kW, CE marking present, an on-site inspection is possible. Isdpfx Aoz Dkifomgeih

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Iisdpewifd Hjfx Amgsh Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg Ijdpoz R Dt Ejfx Amgeih - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Metric US Standard X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Table length Iodpfx Amevd Ddcjgjih 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours 18000 H Dimensions (estimate) length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Multi-spindle drilling machine SCM Ijdpevxtfrefx Amgjih Type FM 29/S 29 spindles Distance 32 mm Table 1200 x 780 mm Max drilling depth for vertical drilling 100 mm/ horizontal 60 mm Spindle speed 3800/min

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Iedpfx Amjxp Sfhsgsih Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm Isdpfx Amswyup Togoih W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg