Used Strausak Gear Cutting Machine for sale (72,648)

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. Ndsdpfx Aoxwlthja Rja A video of the machine can be sent via WhatsApp.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm Nedpfx Aoxwlmuja Roda - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: good (used), Gear Hobbing Machine Strausak 30 Workpiece diameter for manual loading: Ø 35 mm Workpiece diameter for magazine loading: Ø 15 mm Workpiece diameter for fully automatic loading: Ø 10–12 mm Maximum hobbing length: 12 mm Plunge feed at 42% of longitudinal feed: 22 mm Plunge feed at 25% of longitudinal feed: 14 mm Module in steel max.: 1.0 mm Module in non-ferrous metals max.: Solid material ø26 / ø35 mm Selectable number of teeth: 5–390 Nodpox Dxu Sjfx Aa Rsda Cutter speeds: 1160–8550 rpm Plunge feeds per workpiece revolution: 0.0325–0.273 mm Longitudinal feeds per workpiece revolution: 0.033–0.65 mm Cutter diameter: 8–24 mm Machine weight: 600 kg Main motor: 0.8 HP at 3000 rpm Hydraulic motor: 0.25 HP at 1500 rpm Coolant motor: 0.25 HP at 1500 rpm No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Ndjdpfx Aasxwl N Ae Rea Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Ndedozv N Hpepfx Aa Roa Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Ndjdpfxjy Hk T Ij Aa Rea

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Ndedpfjrgahxox Aa Roa

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 250506-mxa-03, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 600 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, input voltage: 380 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,400 kg, total length: 4 mm, total width: 3 mm, total height: 2 mm, warranty duration: 3 months, air pressure: 16 bar, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, Fiber laser metal cutting machine — 1500 W MAX Photonics (Senke SKL-1530F) Brand new, unused — still sealed in original factory export packaging (0 operating hours). Immediately available. High-precision, long-term stable and affordable fiber laser cutting for professional sheet-metal work. Ideal for metal fabrication shops and repair workshops. Delivered as a complete, ready-to-run package. Complete package — key features: ● MAX Photonics fiber laser source, 1500 W ● DELTA servo motors & drives (1500 W X/Y, 400 W Z) ● Raytools control system with RayTools BM110 cutting head ● Large 1500 x 3000 mm working area (fits a full standard sheet) ● Open-frame design — easy access and loading of oversized plates ● Reinforced, stress-relieved welded steel bed for lasting dimensional stability ● Taiwan YYC gear rack + HIWIN 25 square rails + TBI ball screw (Z) ● Positioning speed up to 150 m/min · cutting speed up to 7 m/min (material/thickness dependent) ● S&A industrial water chiller ● France Schneider electrics · SMC pneumatics · France Motoreducer · automatic central lubrication ● Included air compressor (15 kW, 1.6 MPa, 340 L tank) — enables low-cost cutting with compressed air, so bottled nitrogen/oxygen is reserved only for jobs that require it. Lower running costs and greater gas autonomy from day one. ● Included 30 kVA voltage stabiliser — stable power supply, protects the electronics ● Included spare consumables: 100 protective lenses + 100 copper nozzles — full starter set of wear parts Materials: carbon steel, stainless steel, aluminium, brass and other sheet metals — sheet-metal processing, auto parts, metal crafts, chassis/cabinets, kitchenware and similar industries. Nedpfxjztn N Dj Aa Rsda Sales exclusively to commercial businesses. Machine located in Jõhvi, Estonia — viewing by appointment; INCOTERMS: EXW

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. Ndjdpozut Axefx Aa Roa FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, overall weight: 2,500 kg, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), TECHNICAL DETAILS Nsdozrmvtopfx Aa Roda Power: 5 kW MACHINE DETAILS Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Unladen weight: 2,500 kg Number of transport packages: 3 EQUIPMENT Documentation New Dathan knife sets Tools Measuring accessories

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm max. module 6 min. module 1,5 Control SINUMERIK 840 C tooth width 5,5 mm spiral angle min. 0 / max. 60 ° max. number of teeth 120 min. number of teeth 5 ratio of transmission 1:10 min. ratio of transmission 1:1 work piece spindle speed max. 110 U/min blade head turning speeds 20 - 110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools Ndedpjvxwnwsfx Aa Rsa No workpiece clamping device

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Ndsdpozrnhwefx Aa Rsa Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C12302A210I-D, total length: 4,550 mm, total height: 2,500 mm, power of the servo motor: 35,000 W, overall weight: 6,000 kg, product height (max.): 2,500 mm, input voltage: 380 V, For sale: industrial automatic paper cutting machine YYS-I-1750, year 2023. Excellent condition, high-performance (51 kW), suitable for high-productivity paper roll processing. Includes an additional brand-new spare blade. Njdpfx Aozik Dpea Roda The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Other cardboard manufacturing equipment are also available printing machine (Flexo Printer EMproject 89), fully automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. Ndsdezt A H Rjpfx Aa Rea The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Ndjdpfszg D I Asx Aa Roa NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Ndodpfxsza Ukio Aa Rea

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. Nodpfx Aajzu Avzo Reda The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Technical data: Gear diameter: 500 mm Module – max.: 5 Nodpfx Aexz Ef Sea Roda Tooth width: 100 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Machine weight approx.: 13,000 kg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE).

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder Ndodpezur Hpefx Aa Rsa – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Technical data: Gear diameter: 300 mm Nedpfxsxz Eg Ae Aa Reda Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Machine weight approx.: 11,000 kg *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Nsdpfx Aozizkyea Roda Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Ndsdpfx Ajzu Akrja Roa Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm Nsdpfx Aetumrpoa Reda gear width 55 mm max. module 6 min. module 1 Control 840 C Siemens total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 24,297 h, machine/vehicle number: 161711, controller model: MAZAK & FANUC L-64, laser power: 1,500 W, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is suitable for processing sheet metal, tubes, and profiles! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 420 mm Swivel range A-axis: ±300° Swivel range B-axis: ±135° Laser power: 1,500 W CO₂ laser model: YB-L150A8M Sheet metal dimensions max.: 1,250 × 1,250 mm Table load max.: 145 kg MACHINE DETAILS CNC control: MAZAK & FANUC L-64 Operating hours: 24,297 h Njdpfoztxttsx Aa Rjda Machine weight: 8,300 kg Last operated until: March 2025 Currently disconnected and stored EQUIPMENT Cooler Control cabinet

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card Njdsztb Elspfx Aa Rsda - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.