Used Sunmaster Ch-2690 for sale (13,115)

Condition: new, Year of construction: 2023, 660 x 2300 mm, 104 mm passage EVS Variable spindle speed Cooling 2 pieces MT5 Center Standard machine tools Manual and spare parts list 3 claws 12" Sk type 2-axis digital display FAGOR Quick change chisel turret Ljdpjptabasfx Ahajah

Condition: excellent (used), Year of construction: 2020,

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). Ljdpozw Apgofx Ahaeah The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: good (used), Year of construction: 2010, Conventional lathe, center high 254 mm, between centers 1000 mm, bore Ø 80 mm, 12 speed 30 - 2200 rpm, motor 5,5 kw, camlock 6'', dimensions 230x115x165 cm, weight ca. 1750 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck Ø 250 mm, rotating pin, tool post MULTIFIX C with toolholders, steady and following rest Laedpotv Iy Eofx Ahaoh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Laodpfx Aoz Dfzcshaoh Year of manufacture: 2019. Chamber dimensions: 1200 x 1850 mm. The equipment has 3 turbines.

Condition: new, Year of construction: 2025, turning diameter: 542 mm, turning diameter over bed slide: 542 mm, turning length: 1,500 mm, quill diameter: 80 mm, spindle speed (min.): 1,500 rpm, Specifications: Height of centers: 271 mm Swing over bed: Ø542 mm Swing in gap: Ø730 mm Swing over cross slide: Ø387 mm Distance between centers: 1500 mm Lajdpfx Aew U Uqlehaoh Bed width: 320 mm Spindle nose, Camlock taper: D1-8, Ø85 mm Taper 1/19.18 Spindle center sleeve: Ø85 mm Taper 1/19.18 x MT No.5 Spindle bore: 80 mm Spindle speeds: 26–1500 rpm Cross slide travel: 300 mm Main spindle: 10 HP (7.5 kW) Coolant pump Weight: 2000 kg Standard scope of delivery includes: Self-centering chuck 250 mm Multifix quick-change tool post Dead center MT.5 Dead center MT.4 with carbide tip Spindle center sleeve Ø85 mm Taper 1/19.18 Leveling pads, 6 pcs Tool set and box Operation manual & parts list Full-length splash guard Halogen work lamp Chuck safety guards Electrical system conforming to CE Steady rest with ball bearing Follow rest with bronze tip Leadscrew safety cover (CE compliant)

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1 x Bar feeder Iemca CH 220/32 Ljdpfx Ahoz Hpnfsaoah Year of manufacture: 1999 Bar machining diameter: 2 - 20 mm Bar length: 3200 mm Built-in channel: 16 mm Previously used with a CNC long turning lathe Star SA 16 The bar feeder can be inspected at our warehouse at any time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Ljdpfx Ahjyvhl Hsaeah

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 919254, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale during the jeans factory liquidation is a GLOBAL US 63900 CH-NA-AUT automatic industrial chainstitch hemming machine, offered as a complete workstation. This modern (2019) unit is specifically designed for high-quality bottom hemming in denim, trousers, and workwear production. Built on the well-known 63900 platform, it delivers the classic chainstitch finish required in professional garment manufacturing. Laedpey Ipu Tsfx Ahash The machine features automatic functions including thread trimming and pneumatic operation, enabling efficient and consistent production with minimal manual intervention. The unit has been used in a professional production environment and was fully operational prior to factory shutdown. The machine has been serviced on 27.02.2026 and video recorded in full operation in April 2026. Key features: • Automatic chainstitch hemming system • High-speed production capability • Classic 63900 chainstitch finish (denim standard) • Automatic thread trimming • Pneumatic presser foot operation • Stable feeding and consistent stitch quality • Modern unit (2019 model) with low mechanical wear Includes: • GLOBAL US 63900 CH-NA-AUT machine head • Industrial sewing table • Motor and control unit • Foot pedal • Thread stand • Integrated hemming and trimming system • Suction system for thread and fabric waste (visible) Technical details: • Manufacturer: Global Selection (Netherlands) • Model: US 63900 CH-NA-AUT • Year: 2019 • Stitch type: Chainstitch • Max speed: approx. 5,000 stitches per minute • Needle system: DVx57 • Power: 220V • Pneumatic system required Condition: • Used, excellent production condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Denim bottom hemming • Garment finishing • Workwear production • Chainstitch hemming operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: new, Year of construction: 2025, spindle bore: 40 mm, turning diameter over bed slide: 340 mm, turning length: 760 mm, ERL-V Series Variable Speed Lathe Model: ERL-1330 V Turning Capacity: Ø 340 x 760 mm Spindle Bore: Ø 40 mm Variable Speed Drive Sino Digital Readout Fixed Steady Rest Travelling Steady Rest Multifix Quick-Change Tool Post Coolant System LED Work Light Spindle Brake Chuck Diameter: Ø 178 mm Technical Specifications: - Height of centers: 171 mm - Swing over bed: Ø 342 mm - Swing in gap: Ø 512 mm - Swing over cross slide: Ø 205 mm - Distance between centers: 760 mm - Bed width: 230 mm Ljdoxal Hmspfx Ahaoah - Gap width in front of faceplate: 150 mm Headstock and Main Spindle - Spindle nose / internal taper: D1-4, MT No.5 - Spindle centre sleeve: MT No.5 x MT No.3 - Spindle bore: Ø 40 mm - Spindle speeds: Low 100–500 RPM / High 500–3000 RPM, infinitely variable Carriage - Bed length / carriage width: 400 mm / 384 mm - Cross slide travel: 180 mm - Top slide travel: 95 mm Threads and Feeds - Whitworth threads: 45 types / 2–72 TPI - Metric threads: 39 types / 0.2–14 mm - D.P. threads: 21 types / 8–44 - M.P. threads: 18 types / 0.3–3.5 M.P. - Longitudinal feeds: 0.05–1.7 mm/rev - Cross feeds: 0.025–0.85 mm/rev Tailstock - Quill diameter: Ø 50 mm - Quill travel: 112 mm - Centre taper: MT No.3 Motors - Main spindle: AC 2.2 kW (3 HP) - Inverter/Coolant pump: 1/8 HP Weight (Net / Gross): Approx. 850 / 950 kg Shipping Dimensions: 2000 x 965 x 1900 mm (L x W x H) Crated Dimensions: 2270 x 1000 x 1120 mm (L x W x H) Presented in a format suitable for Machinery classifieds such as Machineseeker and TruckScout24.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 647/07, overall weight: 1,000 kg, total length: 2,500 mm, total width: 2,500 mm, total height: 4,700 mm, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Good morning, I have a CWT 95/1200 cooling tower for sale. It is a forced-draft cooling tower. The technical specifications are shown in one of the photos. Documents for the forced-draft cooling tower: - Declaration of Conformity - Technical and Operational Documentation - Information Sheet Renovation work carried out: Ledjz Szfbopfx Ahajah - Motors rewound - Bearings replaced - Sealing systems replaced I am happy to provide any additional information by phone or email.

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Ledpsum H Ekofx Ahasah Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: new, Year of construction: 2022, APS PHE BRAND NEW ASP PHE for Milk pasteurisation CH - UX 10.5 5000 Liters per hour || Never used | Year 2022 | Contact us for more information ARSOPI PHE For Milk 5000 L/H Condition : New IN STOCK Usage: Milk Pasteuriser Capacity: 5000 L/h Laodoz Ht Euspfx Ahaeh

Condition: used, axle configuration: 3 axles, first registration: 08/2018, color: other, Year of construction: 2018 Empty weight: 6.939 kg The 2018 Nordic S340 3 Axle Curtainsider, priced at €18,750 without VAT, features a sliding roof, new tilts, and a galvanized chassis. It is equipped with SAF axles, air suspension, disc brakes, and meets the Code XL for anti-theft. Tire profile dept: Axle 1: left 4 mm right 4 mm Axle 2: left 1 mm right 1 mm Axle 3: left 7 mm right 4 mm Lodpfx Ahjv Icbbjaoah

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Lodpfx Ahoz I Uvksasah

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Lodpsz I Uwhjfx Ahajah

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Laodoz I Uv Repfx Ahash

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Ljdpfjz I Uvqjx Ahasah

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Ljdpfxez I Uwns Ahaeah

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Lasdpfx Aez I Uv Dohaeh

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Lajdpfjz I Uvwjx Ahaoh

Condition: used, Internal grinder cnc REWITECH 220 CNC F C CH Lodpfjz I Uwbjx Ahajah

Condition: used, axle configuration: 3 axles, first registration: 04/2018, color: other, Year of construction: 2018 Empty weight: 6.939 kg Ledpfx Ajv Icbnehajah The 2018 Nordic S340 3 Axle Curtainsider comes with a sliding roof, new tilts, and a galvanized chassis. It's equipped with SAF Intradisc axles and boasts tire conditions of 9 mm on the left and right of the first and third axle, with the second axle tires at 11 mm. This model is highlighted for its anti-theft features and carries the Code XL certification, ensuring high standards of security and durability. Priced at €18,750 excluding VAT. Tire profile dept: Axle 1: left 9 mm right 9 mm Axle 2: left 11 mm right 11 mm Axle 3: left 9 mm right 9 mm

Condition: used, machine/vehicle number: 008710, Max. machining width: 1300 mm Working Table: Fixed pass height Vacuum feed belt: yes Ljdpsztat Uofx Ahajah No. Operating units: 3 Nr

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SCK 60 0 0 00 10 318 98 5, empty load weight: 680 kg, maximum load weight: 2,820 kg, overall weight: 3,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 07/2001, next inspection (TÜV): 03/2028, suspension: steel, tire condition: 85 %, maximum speed: 100 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2001, operating hours: 300 h, Equipment: trailer coupling, from the vehicle registration document "permissible drawbar load, kingpin load or axle load in compliance with the total weight: drawbar load 150 kg, 1st axle 1750 kg, 2nd axle 1750 kg, tandem axle 3500 kg" Laodpfoyvul Tjx Ahash 2 movable ramps; non-slip birch plywood floor; threaded support wheel; overrun brake; manual cable winch; rear fog light; 8 lashing hooks; 4 recessed, folding lashing rings; 2 wheel chocks; Extra: 2 motorcycle mountings with screw fixation