Used Swift-Cut Pro 3000 for sale (24,214)

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Gsdsz Ixzkopfx Aqgeuh

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: PR4-3000-05190216, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, input voltage: 400 V, cutting current: 105 A, input current: 28 A, input frequency: 60 Hz, electrical fuse: 50 A, open-circuit voltage: 292 V, Swift-Cut Pro 3000 CNC Plasma Cutting System Complete new and unused CNC plasma cutting system from Swift-Cut Automation, manufactured in 2019. The machine has never been used and is equipped with a Hypertherm Powermax105 plasma power source and an ECO 4 HC/S dust extraction unit with a spark trap. The dust extraction system is suitable for plasma cutting applications, including aluminum cutting. Guodpfxszvch Ts Aqgeh Main specifications: Manufacturer: Swift-Cut Automation Model: Pro 3000 Year of manufacture: 2019 Condition: New, never used Serial number: PR4-3000-05190216 Cutting area: 3000 × 1500 mm Plasma power source: Hypertherm Powermax105 Plasma cutting current: 30–105 A Power source: 380/400 V, 3-phase, 50–60 Hz Power source P/N: 059412 Dust collector: ECO 4 HC/S Dust collector motor: 5.5 kW Dust collector power supply: 400 V / 50 Hz Dust collector application: Plasma cutting up to 120 A Additional equipment: Spark trap / spark separator The Hypertherm Powermax105 provides high-performance plasma cutting for a wide range of conductive materials. The actual cutting capacity depends on the material type, thickness, and cutting conditions. The ECO 4 HC/S dust extraction unit is designed for plasma cutting applications and is equipped with an additional spark trap. Its configuration also allows aluminum to be cut safely with suitable operating conditions. Please note: The system is offered without a compressor. A suitable source of clean, dry, and oil-free compressed air is required for the operation of the Hypertherm Powermax105.

Condition: used, Technical details: x-travel: 3000 mm y-travel: 1500 mm cutting thickness max.: 32 mm table-size: 3000x1500 mm burner heads: 1 Stück Swift-Cut is part of ESAB Welding & Cutting GmbH. The machine consists of several components: Gedpfxszu Nhds Aqgeuh Plasma cutting table: Swift-Cut Plasma power source: Hypertherm MAXPRO200 / 400 V / 3-phase / 50 Hz / Max. output current: 200 A / Input current according to the nameplate: max. 64 A / Mild steel cutting capacity: 32 mm production cutting / 75 mm max. severance cut Extraction system: Keller VARIO-2-KM12-BE30 / Year of manufacture: 2019 *

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: Gusdpfjztu Aqjx Aqgoh - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our HUGE Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport in Europe. - Video of the machine in operation available upon request; on-site testing welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Zustand: WIE NEU (Nur 238 Betriebsstunden, ca. 1 Monat Nutzung). Verfügbarkeit: Sofort verfügbar. Wir bieten eine erstklassige CNC-Plasmaschneidanlage Swift-Cut PRO 2500 MK5 (UK, 2022). Perfekter technischer und optischer Zustand, sofort einsatzbereit. Mit hocheffizienter Hypertherm Powermax 105 und Wassertisch ausgestattet. Wichtigste technische Daten: - Schneidbereich (L x B): 2500 x 1250 mm - Z-Achsen-Freiraum: 120 mm - Plasmaquelle: HYPERTHERM Powermax 105 - Tischart: Wassertisch Inklusive Software: - CNC-Steuerung - 2D-Design: Solid Edge 2D - Nesting: SigmaNEST Companion Erweiterte Funktionen & Ausstattung: - Soft Sense (IHS): Genaue Einstech- und Schnitthöhe - DTHC: Dynamische Spannungskorrektur während des Schneidens - XYZ Torch Protection: Fortschrittlicher Kollisionsschutz (Magnetischer Kopf) - Laserpointer zur einfachen Positionierung - Präzise Linearschienen und Planetengetriebe Transport & Logistik (Unser GROSSER Vorteil): - KOSTENLOSER Ladevorgang: Fachgerechtes Verladen im Preis inbegriffen! - Transportunterstützung: Wir helfen bei der Organisation des Transports in Europa - Ein Video im Betrieb ist auf Anfrage erhältlich, Vor-Ort-Test möglich

Condition: used, Year of construction: 2018, functionality: fully functional, Working area: 3000 × 1500 mm Design: Downdraft / fume extraction table Plasma source: Hypertherm Powermax65 Max. current: 65 A Gsdsz Iniqspfx Aqgouh Plasma source power supply: 400 V / 3-phase Compressed air: min. ±5.9 bar CNC plasma cutting machine with automatic torch height control

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m Guodpfxsy Sxvho Aqgeh FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Gedpfx Aqsz Hvl Rjgjuh Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: new, This collection features three of the most advanced CNC plasma cutting machines. Thanks to the user-friendly software, the Swift-Cut-Pro series promises precise cutting at the highest speeds with minimal investment. The Swift-Cut-Pro series is easy to use, quick to learn, and is backed by excellent customer service. The Swift-Cut-Pro series is the solution for affordable, in-house metal cutting. Guodpfxjgkguge Aqgoh We would be happy to arrange a demonstration appointment for you.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software Guodpfxsy Snwne Aqgeh - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR Guodpjzk Nitsfx Aqgsh ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Gedpoziaqfsfx Aqgouh

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Gsdpfx Aqeymax Esgeuh

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck. Godpfxex U Df Hs Aqgouh

Condition: ready for operation (used), Year of construction: 2024, We offer for sale a modern PAOLETTI Salvacut 3000 automatic cross-cut saw, designed for high-performance and precise cutting of wood materials. This machine represents a powerful and efficient solution for automated cutting operations with high speed, accuracy, and reliability. Key Features & Benefits Manufacturer: Paoletti Energy S.r.l. Model: Salvacut 3000 Year of manufacture: 2024 Automatic cutting system for high productivity Suitable for industrial wood processing and production lines Robust and modern construction Technical Specifications General Voltage: 400 V Frequency: 50 Hz Installed power: 12 kW Saw motor power: 5.5 kW Cutting System Saw blade diameter: 500 mm Bore / thickness: 35 / 4.2 mm Cutting speed: 2880 rpm Minimum cutting time: approx. 0.3 s Material Capacity Max. cutting section: approx. 70 × 300 mm Max. workpiece length: approx. 5,100 mm Min. workpiece length: approx. 500 mm Min. cross-section: approx. 30 × 15 mm Performance & Feeding Maximum feed speed: up to 200 m/min Material feed direction: right to left (left to right on request) High-speed automatic processing Compressed Air & Extraction Air pressure: approx. 6–8 bar Air consumption: approx. 500 Nl/min Extraction capacity: approx. 5,000 m³/h Extraction speed: approx. 28–30 m/s Extraction connections: Ø120 mm and Ø100 mm Dimensions & Weight Gjdpfx Ajzgr Scjqgouh Main unit weight: approx. 2,000 kg Max. output sorting unit load: approx. 500 kg Working height: approx. 1,000 mm Operating Conditions Operating temperature: +5 °C to +40 °C Storage temperature: +5 °C to +40 °C Advantages High cutting speed and precision Reliable industrial design Suitable for continuous operation Efficient material processing with stable output quality Additional Information CE certified Modern machine (2024) – very good condition

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Gusdpfx Aezyc Risqgoh The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers Godpjxf Hv Hsfx Aqgouh - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Gsdpfx Aeyug Eneqgsuh

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Godpfx Aqsymaw Uogjuh Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Gsdpfoy Rvfqex Aqgeuh Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Gsdpfxjzbbmts Aqgjuh Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. We would be happy to carry out an individual test on the CUT 3000 for you. Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Gujdpjgu Edyofx Aqgeh Speed continuously adjustable, 80 to 1600 mm/min. Diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W: 370 x H: 450 Model or color variations possible.

Condition: good (used), functionality: fully functional, power: 11.03 kW (15.00 HP), 3000 mm cutting length – separating cut – blade diameter 500 mm – cutting height 170 mm Gedpfx Aez Hdpdoqgjuh

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Equipment: CE marking, cooling unit, documentation/manual, Fiber Laser Cutting System CUT LITE PENTA, Model LME 3015 Gujdpfoznk Dtex Aqgoh Year of manufacture: 2021, CE certified Excellent condition. Cutting dimensions: 3000 x 1500 mm Laser source: IPG YLS 6000 W

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring. Gusdpfx Aqsy S Ni Eogsh Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Gsdpfxoyzhl Ds Aqgouh