Used Tafa Tcv 400 Metal Spraying System for sale (71,597)

Condition: good (used), TAFA TCV 400 Arc Spray Power Source For sale is a TAFA TCV 400 power supply for industrial arc spray systems (Twin Wire Arc Spray / Metallizing). This unit is ideally suited as a replacement or to expand existing TAFA/Praxair systems. Technical data: Manufacturer: TAFA (Praxair Surface Technologies) Model: TCV 400 Output current up to 500 A Three-phase power supply Industrial design for professional use Ijdpezqt Uyofx An Hjif Suitable for wire arc spraying (Twin Wire Arc Spray) Application areas: Corrosion protection Wear protection Shaft repairs Bearing fits Mechanical engineering Power plant and equipment construction Metallization of steel components Condition: Used Visual condition, see images 3 units available Inspection and collection: Marie-Curie-Str. 1 16225 Eberswalde

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery Iiedpfx Ansyc H N Nj Hef • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications 🔩 Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm 🛠️ Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) ⛓️ Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm 🧰 Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev 🧱 Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 📏 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Iisdpfx Aeyr Ihlen Hof Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel Iiedpfx Aezunvaon Hof - Vibrator - Rotary valve discharge

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. Iiodpfxoyvac Ae An Hof System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment Ijdpfx Aszu Sugen Heif • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Iisdexy R Ezjpfx An Hef

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches Ijdpfxef Ncadj An Hjif with cutting table (2-part)

Condition: excellent (used), functionality: fully functional, REF: MM6472 1 x Fortress Phantom metal detector on inclined conveyor belt with alarm and belt stop on detect reject system. Stainless steel frame mounted on height-adjustable feet. Manufacturer - Fortress Technology. Model - Fortress Phantom. Serial number - K-24417-13183. Aperture dimensions - 550mm wide x 295mm high (clearance). Ijdpfx Aszqt Hcon Hoif Handing - Inclined, Left to Right. Belt type - Modular plastic. Belt dimensions - 1750mm long x 530mm wide. Electrical requirements - 380 V / 50 hz / 3 phase.

Condition: new, Year of construction: 2025, functionality: fully functional, maximum load weight: 200 kg, warranty duration: 24 months, Available ex-stock Switzerland – immediate delivery! 24 months warranty Net capacity: Cleaning area: D=900 mm Internal height: 530 mm Loading weight: 200 kg Machine body, internal piping system, control cabinet and washing basket made of stainless steel - 2 washing pumps for efficient cleaning - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking mechanism - Removable filter plate Accessories: 1x transport trolley with pull-out basket Steam extraction Automatic level top-up Oil skimmer, model WE Draining device / floor flushing with hoses and manual ball valve Iisdjw Ic Hnspfx An Hsf

Condition: good (used), machine/vehicle number: S/N 40240 003151, 1 X Loma IQ metal detector system. This machine runs left to right with a modular belt and pneumatic pusher reject into a lockable bin. Technical Specification ⚙️ ✅Serial number - 40240 003151 ✅ Manufacturer - Loma Systems ✅ Year of manufacture - 1998 ✅ Aperture dimensions - 350mm wide x 175mm high (140mm clearance). ✅ Belt dimensions - 2100mm long x 300mm wide (modular belt). ✅ Power - 380V | Phase 3 | 50Hz ✅ Runs left to right. General machine overview 🗒️ Robust and reliable engineering has made Loma a trusted name in quality control. This machine represents a proven and cost-effective solution for businesses needing a dependable layer of metal contamination detection. Key features and benefits 🧰 ❇️ Reliable Performance Built in an era where durability was paramount, this IQ model offers consistent and straightforward metal detection, ensuring product safety and brand protection through a well-established, classic technology. ❇️ Cost-Effective Solution A machine of this vintage provides an excellent opportunity to acquire an industrial-grade metal detection system at a fraction of the cost of a new unit. Iiodowk Nq Hspfx An Hof ❇️ Simple Operation Its control system is typically simple and mechanical, making it easy to operate and maintain without the need for complex programming. ❇️ Robust Construction The machine's durable build quality is designed to withstand the rigors of continuous use in various production environments.

Condition: used, Metal Detector with Conveyor System Metal detector Iiedezmg Rajpfx An Hef Control cabinet included Conveyor system

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Iiedpfozmap Nox An Hjf Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: good (used), Year of construction: 2007, chuck outer diameter: 400 mm, through hole: 100 mm, Metal cutting Tooling ROHM - 400 MACH-ID 2994 Make: ROHM Type: 400 Year: 2007 Diameter: 400mm Iisdpszdilpsfx An Hjf 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, condition: used, Loma Systems IQ 3+E metal detection conveyor The conveyor drive motor must be connected separately. The machine was previously used in an inline configuration. Year of manufacture: 2018 Iiedpfxjzc N D Ae An Hef

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of Construction: 2015 Machine Type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser System: Dual Laser Material Processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 Upgrade / Modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, including the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R versions. Technical Data Power Connection: 3P/N/PE AC 400 V ±10% Frequency: 50 / 60 Hz Max. Current Consumption: 17 A per phase Compressed Air Supply: 7 - 8 bar Inert Gas Supply: 5 bar Cooling: Water-cooled system Machine Dimensions (approx.): 5,300 x 2,700 x 2,760 mm (L x W x H) Weight (approx.): 13,400 kg Equipment Dual Laser System Powder Handling System Material Feed Filter Units Process Gas Supply Control Cabinet Technology Operating and Control System Work Platform with Access Ladder Water-Cooled Laser System Existing Peripherals as shown in the pictures Documented Service Work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of work Operating Data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application Areas Additive Manufacturing of Metal Components Aerospace Industry Automotive Industry Tool and Mold Making Research and Development Prototype Manufacturing Industrial Series Production Scope of Delivery Concept Laser X Line 2000R BC2 Main Unit Powder Handling Components Filtration Technology Existing Peripherals as shown in the pictures Additional accessories according to the existing scope of delivery Condition Used Machine from industrial production use Laser window clean and clear Iiodpfx Anozcn Efj Hjf Optical condition as shown in the pictures Inspection possible by appointment Due to the size and weight, professional dismantling, loading and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors in the technical data and prior sale.

Year of construction: 2025, condition: new, functionality: fully functional, Available from Swiss warehouse, immediate delivery! 24-month warranty Payload: Cleaning area: D = 800 mm Internal height: 530 mm Load weight: 150 kg Machine body, internal piping system, control cabinet, and wash basket made of stainless steel - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking Iijdpfsir Apcox An Hjf - Removable filter sheet Accessories: Swath extraction Automatic level replenishment Oil skimmer, WE version Pumping device / floor flushing with hose and manual ball valve

Condition: as good as new (ex-display), Year of construction: 2017, UNION CM10 SP TWIN Double cabin: No. 1 washing cabin, No. 2 cooling cabin equipped with No. 3 pneumatic doors. "Pass-through" type the baskets are loaded from one side and unloaded in the opposite side performing the complete cycle. The parts are loaded with a mobile trolley on the side of the washing cabin and transit inside the cooling cabin and then unloaded from the side of the cooling cabin. - Advancement between booths automatically via sideshift. - Basket rotation with safety clutch. - Possibility of loading a basket ø1060mm useful inside 980 mm. - Internal useful height 1000 mm. / Max. load capacity. 500 kg. - Washing tank 280 lt. with level restoration and stainless steel axial washing pump. - Dosatron soap dispenser on wash tank 3-10%. - Rinsing tank 250 lt. with level restoration and axial washing pump in stainless steel. - Plant constructed of AISI 304 except for safety ground tank, external structures and external paneling (painted FE). - Safety ground tank at the base of the plant. - Total thermal insulation. - No. 2 External trolleys with drip tank + No. 2 Baskets ø1060 internal useful 980mm. Iedor Duq Ujpfx An Hjif - Automatic doors with safety barriers. - N°3 Bag filters (N°2 on washing 25 micron - N°1 on rinsing 10 micron). - "Union DC60" oil separator. - High-pressure blower, side air blade positioned. - Drying fan with electric heating elements. - Vapor aspirator - Emptying pump. - No. 2 Cooling Fans. (Water Chiller NOT included in the quotation). - PLC SIEMENS S7-1200 with TOUCH PANEL KTP 700 BASIC + Gate Manager for remote assistance.

Condition: new, Year of construction: 2025, power: 400 kW (543.85 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 12.000 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 465 x 230 x 250 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel Iodpfx Aow A Ha Nen Hoif - Tank

Condition: new, Year of construction: 2024, RHS spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gearmotor (possibility of managing fixed-tilt-full rotation). - Siemens PLC - possibility of creating and managing washing recipes. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Thermal insulation of the entire system. - Magnetic/electronic control of correct door closure. - Level sensor / protection for too low level. - Automatic water filling. - Vapor aspirator. Available in various configurations with: - 50-100 micron bag filter. - Drying with fan and electric heaters. - Oil separator - Emptying pump. Technical features: - Loading capacity: Single basket 670x480xh.400 mm or No. 2 450x300xh.200 mm. Iisdpfx Anjrywyao Hjf - Maximum allowable weight: 100 kg. - Tank volume: 400 Lt.

Condition: new, Year of construction: 2024, SM11 spray cleaning system Iiodpfjrwmyhox An Hjf Supplied as standard with: - Single washing tank. - Basket movement by gear motor. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Electronic control of correct lid closure. - Level sensor / protection for too low level. - Tank drain with ball valve for bath change. Available in various configurations with: - Whole system thermal insulation. - 50-100 micron bag filter. - Vapor aspirator. - Drying with fan and electric heating elements. - Drying with high-pressure blower and air blade. - Oil separator. - Automatic water filling. - Emptying pump. Technical characteristics: - Basket diameter: ø1100 mm. - Internal useful height: 700 mm. - Maximum allowable weight: 250 kg. - Tank volume: 260 Lt.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, warranty duration: 24 months, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 12-Week Delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ ✅The Multi-Treat spray pretreatment machine is used for the surface treatment of materials to be painted. It offers the possibility of processing up to 8 different chemicals in tanks with varying numbers, depending on the process. All tanks are made of 316 SS and are insulated. Iijdpfxefggcws An Hef The number of tanks and the number of heated tanks are determined according to the process steps. ✅The heating in the tank is done via gas heat exchangers. The processes can be monitored, and the times and temperatures of all processes can be set via the PLC touchscreen. ✅Any errors that occur in the system can be observed on the control panel. Automatic floats are located in the tanks; the system automatically stops if there is not enough water or chemicals in the tanks, and the liquid level is automatically replenished by transferring liquid between the tanks, ensuring the system remains safe. ✅There is a drain basin under all tanks. The drain basin is made of 316 SS. The tanks are made of 2 mm stainless steel 316. The material undergoes penetration testing and is argon-welded and sealed. The grates in the tank prevent dirt from entering the pumps. The interior of the cabinet consists of sandwich panels made of stainless steel 304, and the exterior is made of powder-coated sheet metal. ✅The panel thickness is 80 mm. It consists of stainless steel panels filled with polyurethane. PPT ring pipes and nozzles offer a long service life. ✅Thanks to the steam extraction fan, steam diffusion from the system into the work area is prevented. The washing system doors are container-like and sealed with silicone seals. The movable washing platform in the cabinet moves back and forth through the cabinet to wash the materials. The hoses are supported by the mobile carrier system. There are separate pumps for each process and a drain pump for draining liquids from the tanks. The drain pump is connected to the chemical drain tank. ✅There are manual application guns for manual application for each process. The system has a manual mode for pretreatment. The drain time and process time can be set via the PLC control panel. The drain time applies to manual application.

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Isdpfx Anshgh I Ss Hoif Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system, type L122 Automatically operating hot water chamber cleaning machine with basket drive via geared motor, machine housing made of stainless steel 1.4301, - 2 sets of three-sided arranged nozzle systems made of stainless steel with stainless steel flat jet nozzles, - 2 stainless steel washing pumps (manufacturer: Xylem/Lowara), Ijdohl Ic Repfx An Hjif - Level control as dry-run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Usable height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2 x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (RT - 60°C) - Connection power (electrical): approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 (h) mm

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ Iiodpfx Askwct Uon Hsf ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️