Used Tbt Deep Hole Drilling Machine 2000 X 1300 X 1500 for sale (100,405)

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Godpov A Uw Djfx Afuobu Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Godpfx Aozlb D Sefujbu Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -Drill diameter ~30 -Drilling depth 750 / Extension ~1000 Gbjdpfed Ri H Esx Afuou -Tank -Pumps -Loading device -Tailstock

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Technical specifications Drilling method : single-lip drilling Number of spindles 1 Gedpfxofgwlbo Afuobu Drilling range in steel D= 1-6 mm Drilling depth 420 mm Max. workpiece length 420 mm Manufacturer: TBT / SFT New electrics and new controls!

Condition: good (used), functionality: fully functional, drilling depth: 600 mm, workpiece weight (max.): 2,000 kg, travel distance X-axis: 750 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 3,000 rpm, drill diameter: 35 mm, drill spindle length: 600 mm, spindle mount: MK 2, spindle stroke: 600 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, Driling capacity: Ø 35 mm Driling depth: 600 mm Gbodpszu Sp Rofx Afuju X-axis: 750 mm Y-axis: 630 mm Z-axis: 300 mm Spindle speeds: 0 - 3000 rpm Tabel size: 1100 x 650 mm Load on table: 2000 kg max Turning table: 360° Controller: Degen AE30 Including: - Cabinet + pallet with drills - Coolingunit - Machine manuals Country of origin: Germany Motor power: 11,2 kVA Machine LxWxH: 350 x 120 x 175 cm Machine weight: 1300 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: Godpfxewh Rp Eo Afusbu - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Gbjdpfxexxb Rre Afuou Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm Gjdpfx Aexzz Hofuebu - Drilling depth: 750 mm - Filter - Pump

Condition: good (used), - Drilling diameter: 5-30 mm - Drilling depth: 750~900 mm - Modifications according to customer requirements Gbedpfx As Dcz Djfueu

Year of construction: 1980, condition: ready for operation (used), A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible. Godsy Rtfzjpfx Afuebu

Condition: reconditioned (used), -Drill diameter: 5~25 mm -Drilling depth: 1500 mm Gbodpfx Afshuil Rjusu -Tailstock -Tank -Pump -Filter

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Gjdpfx Afoywnr Noujbu Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Godpfx Ajvca Rcofuobu Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Gbsdpfx Aew Ekfuofueu Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: used, Year of construction: 2008, cutting diameter 1500 mm saw band length 15050 mm cutting width 2000 mm total power requirement 45 kW weight of the machine ca. 43.500 kg required space 3862 x 2110 mm FRIGGI 2MF GANTRY 1500 x 2000 x 9000 Manufacturer: FRIGGI S.r.l. Address: Via Vitt. Veneto 13, 20086 Motta Visconti (MI), Italy Model: 2MF GANTRY Type / Version: 1500 x 2000 x 9000 Serial Number: 3610 Year of Manufacture: 2009 Weight: 43500 kg CUTTING CAPACITY Rectangular Profile: 1500 x 2000 mm Round Profile: Ø 1500 mm Gantry Stroke: 9600 mm SAW BLADE Gjdpjzk Rh Rofx Afuobu Band Dimensions: 80 x 1.6 mm Max. Band Length: 15050 mm Band Speed: 10 – 120 m/min DRIVES Band Motor Power: 18.5 kW Bow Motor Torque: 12 Nm Gantry Motor Power: 2 x 12 Nm Flywheel Diameter: 2x 1200 mm + 2x 620 mm HYDRAULICS Hydraulic Tank Capacity: 120 Liters Hydraulic Pump Flow Rate: 23 l/min Hydraulic Pump Motor Power: 4 kW ELECTRICAL DATA Installed Power: 45 kW Supply Voltage: 400 V Max. Current Draw: 80 A Frequency: 50 Hz Power Factor: 0.8 COLOR Structure Color: RAL 7039 Flywheel Covers Color: RAL 7021 Moving Parts Color: RAL 2004 TYPE PLATE / CE DECLARATION CE Marking: Yes (Directive 98/37/EC etc.) CE Declaration Date: 19.03.2009

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Gbjdpfx Asz Ntr Isfuou Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Condition: repair required (used), Year of construction: 1996, For sale: an IXION deep-hole drilling machine, model Zyklen TL 601. Unfortunately, the machine is currently experiencing electrical problems. Constants need to be re-programmed by a technician, and the buffer battery needs to be replaced. A new LCD display was recently installed. Display: NEW LED Machine No.: 950192 Year of manufacture: 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel distances + Quill Tl 601 (Z) 600 mm + Drilling unit, vertical (Y) 300 mm + Table, transverse (Table surface 1200 mm x 600 mm) (X) 700 mm + In the drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + Holder SK 40 according to DIN + Draw bolt 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + at 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW + Spindle speed Directly programmable 100-4000 rpm Working performance: + Drilling capacity in steel 2312 D 32 mm + Thread cutting M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT. We can deliver and commission the machine. Godpfoh Dpv Rex Afusbu All prices plus VAT. Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours?

Condition: ready for operation (used), -Drill diameter: 5~25 mm -Drilling depth: 1000 mm -Tailstock -Tank Gbododgpltopfx Afusu -Pump -Filter

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 Drilling system BTA Min. drilling diameter D 35 mm Max. solid drilling D 130 mm Max. counterboring D 170 mm Main spindle block with two-stage gearbox -Drive Ax AC motor 37 kW with brake for spindle locking 1200-1500 rpm -Drill spindle block with two-stage gearbox 50-500 rpm, 450-1200 rpm, electrically switchable. Optional rotating / stationary tool. Main spindle box (tailstock) with two-stage gear electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck. Main and drill spindle speed continuously adjustable Machine bed as welded construction Guideways in linear roller design size 65 -Drill carriage movement via ball screw, gear and servo motor 3 kW Rapid traverse max. 3000 mm/min Maximum feed rate: 1000 mm/in. Hydraulically attachable drill bushing holder 2 x attachable steady rests 2 x roller pre-centering devices D20-100 mm 2 x Boza drilling range D 8-200 mm with chip chute and suction pump Scraper conveyor Gsdpjq A S Ekefx Afuobu -1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring of the drilling spindle and feed rate in % painting: blue/gray, RAL 5015/7035

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Gsdpfxswcldas Afuobu Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: like new (used), The deep hole drilling machine have 6 spindles and is in very good condition, LIKE NEW! This can be like to inspect under pressure. On request we can send you more pictures. Gbsdpfx Afsb Naclsusu Number drill spindle 6 ELB and BTA drilling Min. drilling diameter 3 mm Max. drilling diameter 20 mm Max. drilling depth 1000 mm We see ourselves as a competent partner for downhole drilling, turning, milling and welding in paid labor. We will gladly make you an offer!

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles: 1 Full-bore diameter: 5-40 mm Drilling depth: 1,000 mm Gbsdpfx Afod S Ualsusu

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Gjdpfjzu Szyjx Afuobu

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in a very good condition! Gbodpfx Afshwhx Heuou Deep hole drilling machine type TBM 120-2000 Drilling system BTA Drilling range full drilling 30-130 mm Max. boring 200 mm Max. drilling depth 2000 mm Drill spindle box with two-stage gear, electrically switchable. Optional rotating / stationary tool Main spindle box (tailstock) with two-stage gear, electrically switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck On request we will be happy to send you more pictures.

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Technical Data Drilling system: ELB system Gedpjx E U S Eofx Afusbu Number of drilling spindles: 2 Min. drilling diameter: 1 mm Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Nominal workpiece diameter range: 5–30 mm