Used Temperature Test Cell Walk-In Test System for sale (55,299)

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Hsdpfx Aovb Hanep Honn Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel Hsdpfx Apevb E Uqo Henn - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Hnjdsylmamjpfx Ap Hen Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock test system Working climate area Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions Width 1100 mm Height 2300 mm Depth 2300 mm Test chamber dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate Hnjdpfx Aetqcu Ejp Hsn 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Hedpfetrf Ulox Ap Henn Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. Hnedpfx Apeyx E D Es Hon At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: Hedpfx Apjyvac Ao Honn 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Serial number – 0516. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Serial number – GP21062420 & GJ21063019. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature testing chamber. Heraeus Vötsch temperature testing chamber, water-cooled Temperature range: -70°C to +180°C Temperature deviation (time-related): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation +20°C: 3000 W Thermal compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Hjdjzdtdhjpfx Ap Hjnn Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 10.5 kW, Rated current: 22 A Fuse, on customer side: 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement): < 69 dB(A) Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants that comply with legal regulations 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), RS Simulators Here we offer a temperature testing chamber. Air-cooled Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x Height 520 mm x Depth 500 mm External dimensions: Width 820 mm x Height 1750 mm x Depth 1300 mm Power consumption: 13.5 A Hnodezdtc Rjpfx Ap Hjn Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), RMS Vibrations Vibration Testing System Here we offer you an RMS electrodynamic vibration testing system. RMS Vibrations Vibration Testing System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Untested! Tests were not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Hnedpfjzdtc Dex Ap Hon Written orders can be placed by email or fax.

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here, we offer you an RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max. force: 2158 N Max. speed: 1.3 ms Power amplifier TGA 1500 3 x 380V / 50Hz / 35A / 8 kVA Condition: used Scope of delivery: (See image) Hedpfxozdtcwo Ap Hjnn (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan. Here we offer you an RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max. force 2158 N Hedpfszdtcqsx Ap Henn Max. speed 1.3 ms Power amplifier TGA 1500 3 x 380V / 50Hz / 35A / 8 kVA Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Condition: used Scope of delivery: (See picture) Hnodpfx Apozdr Edo Hon (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output Connectors CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module Hsdpfx Aey Rlbhsp Hjnn PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. We will be happy to answer further questions by telephone.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and a CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Type: V895-440 HBT SP Air-Cooled Vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Type: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial design Supply voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Controller Hnodey Iwp Sepfx Ap Hon IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Type: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Sliding table / mounting table available Vibration-isolated installation Program operation possible Sliding table 760 mm x 850 mm Threaded insert spacing 100 mm Enabled licenses: Excitation types Sine, Resonance Dwell, Limit Control, Amplitude Dwell Multi Sweep Sine, Random, Sine-on-Random PSD Limit Control, Shock Extensions Scheduler, Multi-Language, Launcher, System Monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / controller active Inspection under power possible Scope of delivery LDS V895-440 HBT SP Shaker LDS SPA56K Amplifier IMV K2+ System PC system complete CTS climate chamber Accessories as shown in the pictures Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), RS Simulators We offer a test cabinet here. Hnsdjzdn Stepfx Ap Hjn Water-cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800 mm (W x H x D) External dimensions: 1100mm x 1850mm x 1500mm (W x H x D) Power consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Type: TS 600/45 Explosion-proof operation not tested However, max. 160°C in this condition Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for temperature change and shock testing in industry, research, and development. Technical data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Changeover time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection class: IP 22 Refrigerant: R404A: 2.3 kg / R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Further data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male Equipment: Two-chamber system (hot / cold chamber) Digital CTS control Display / control panel Program operation Operating hour counter Observation window Interior lighting Temperature limiter Test specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick start guide available Safety data sheets available Note: Hedpfjy I Ntcox Ap Hsnn The table shown in the photos is not included in the sale. Condition: Used Optical condition see pictures Scope of supply as shown in the pictures Inspection possible by appointment. Loading can be organized. Commercial sale (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Hedpfsza Dv Isx Ap Honn Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2020, Good condition. Single module! Hnsdpfx Aswcrlkep Hjn Ask for additional information!

Year of construction: 2021, condition: used, Serial no. P61483, PC control, manufacturer Innomatec, touch display, process chamber, compressor station, peripheral units, roller trolley for crate provisioning. Subject to prior sale. Hsdpfx Apoy A Ir Hs Honn

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Hjdsy T Ulzopfx Ap Honn Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: like new (used), operating hours: 250 h, SHI Machines Type: BlueBox Virtually unused with only 250 operating hours! Technical specifications: Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Hsdpfx Aey Tg R Nsp Henn Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test bench made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Load capacity up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information provided are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Hjdpfxjk E Htye Ap Hjnn Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), motor manufacturer: Yunnei / DEF30CAA5, General information Field of application: Construction Weights Empty weight: 2.800 kg Functional Generator capacity: 45 kVA Dimensions of cargo space: 250 x 115 x 200 cm CE mark: yes Other information Generator: Stamford Hedpfouidyvjx Ap Honn Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 80 kW (108.77 HP), motor manufacturer: Yunnei - DEF47CZAA5, General information Field of application: Construction Hedjuidypopfx Ap Henn Weights Empty weight: 2.500 kg Functional Generator capacity: 80 kVA Dimensions of cargo space: 300 x 115 x 200 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank