Used Top | With Template for sale (9,111)

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Gsdpjyaqttjfx Abfsuf

Condition: good (used), Fetra Table top Cart 127x80cm with 3 shelves Guodpfey Sd Tfsx Abfjf Perfect condition, like new. Modular design. Powder-coated blue. Non-marking thermoplastic rubber tread, wheels with precision ball bearings. 2 swivel wheels with brakes and 2 fixed wheels. Load capacity: 500 kg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,441 h, load capacity: 1,400 kg, lifting height: 3,160 mm, free lift: 1,630 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Tested with 80% remaining capacity Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (Government safety regulations) // Completely repaired, serviced and checked Sideshift 3rd valve Rear working light Front working light Gusdpfx Aoyp T Sdjbfef Safety light,

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Router FG 314-2 - with overhead router HM / 18 Scheer - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template - Weight approx. 21 kg - 2000 watts Gedpfx Abox R Efgofjuf - 7 kg - Speed: 10,000 – 18,000 rpm Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net Gujdowh Rlgjpfx Abfsf - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Gedpfoztkqdex Abfjuf Parts can be identified using a barcode reader/scanner, associating each part with its machining program. It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Condition: excellent (used), Year of construction: 2017, VUTEK H100 3.2m Fast LED Hybrid printer Speed exceeding 450 m²/h Color 6C (white disabled) Roll option 3.2m 2 tables under efi full service Guedpfxoza U Saj Abfef new belt installed on 04-26 via efi Recently, 4 new printheads were replaced (defective solder joints on the nozzles).

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Gusdpfx Abjzp E T Ssfsf Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Guodpfeun Nvbex Abfof

Condition: used, Diameter: 3.60 m Height: 10.5 m Flat-bottomed Gedpfew I R T Njx Abfeuf Equipped with a hatch on the side wall and top The tanks were used in the chemical industry Four units available.

Condition: used, TECHNICAL DETAILS - Bar diameter : 8-100 [mm] - Bar length : 1550 [mm] - Adjustable bar feed speed : 80 [m/min] Godoyzi U Hspfx Abfeuf

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser hours: 27,000 h, including Sheetmaster, Gripmaster, and Toolmaster Gusdpfxozr Ha Ee Abfef Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Gusdpjzq A Ipefx Abfof Pressing force: 130 tons

Condition: good (used), functionality: fully functional, mileage: 17,300 km, power: 88.26 kW (120.00 HP), fuel type: diesel, empty load weight: 5,430 kg, overall weight: 10,500 kg, axle configuration: 4x4, fuel: diesel, Year of construction: 1986, Equipment: all wheel drive, TOP CONDITION Gjdpsxm S Absfx Abfeuf

Year of construction: 1998, condition: excellent (used), Max. roll diameter unwinder: 750 mm (Shaft 76) Max. roll diameter rewinder: Gsdpfezn Ayyjx Abfeuf 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufactured by: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are slim; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x razor blades

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Gujdpfx Aomk S Sljbfef Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - 2nd knife row, log spacer, 4-sided segment base, discharge auger with geared motor, Fast hydraulic reverse with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a tried-and-tested and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components for this – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the gate timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cutting hopper design The hopper performs several tasks at once. The material to be shredded is initially fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for shredding. Even with bulky parts, the shredder cuts itself free. If required, hopper extensions and lids with gas springs are also available. Long-lasting rotor bearings thanks to offset design Due to the extreme stress during shredding, a rotor bearing must be particularly robust. To prevent dust or foreign objects from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with geared motor - Fast hydraulic reverse with shock valve - Mesh size 15/20 mm List price: EUR 52,320, sold at a special price Location: Ex warehouse 54634 Bitburg - immediately available - Guedpfspdqzxjx Abfjf The pictures show a machine without a discharge auger; it will be in stock soon.

Condition: good (used), For sale is a used TOP MASTER planing machine FS 350 with a planing and thicknessing width of 350 mm. The machine is in good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 350 mm - 3 knife shaft (strip knives) - Planing table length 1800 mm - Thicknessing height 200 mm - Planing table flaps - Drilling support - dust extraction possible The planing machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planing machine, thicknesser, thickness, Felder Reference: R-N3011 Guedpfx Ajzltigjbfef

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m Guedpfxeu Smq Sj Abfjf - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Gusdov Dm Epepfx Abfsf Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: good (used), Semi Automatic Constant Heat Sealing Bag Machine Guodpfx Absutg Dajfsf 300mm heat seal line With foot pedal control Adjustable temperature control for different bag thickness Temperature range 30 to 200 degrees C 220 / 240 volts, 50 / 60 HZ With adjustable bag loader for different bah heights In excellent condition Price € 495

Condition: good (used), Saxon Bag Sealer Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Gusdpfev Dm Dlsx Abfsf Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Price € 5,950

Condition: used, Technical specifications: Gusdpfx Abozia Dxefof Max. planing width: 530 mm Cutterhead diameter: 120 mm Number of knives: 4 Total length of tables: 2900 mm Table height adjustment Tilting outfeed table Safety switch Power supply: 380 V Motor power: 5 kW Overall dimensions: Length: 2900 mm Width: 1300 mm Height: 1300 mm

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Gsdpfoww Hx Isx Abfjuf

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Godpfoxx Si Esx Abfjuf Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition