Used Webster Bennett Dcm 120 for sale (8,975)

Condition: used, WEBSTER & BENNETT DOUBLE COLUMN VERTICAL BORING MACHINE Model 120” ‘DCM’ Serial number 5914-1 Year 1970 Diameter of faceplate 108” 2743 mm Diameter of work turned with ram 120” 3048 mm Max. diameter turned for full travel of turret slide114” 2895 mm Diameter of work admitted 122” 3100 mm Height from faceplate to underside of cross-slide78” max. 1981 mm 24” min. 609 mm Vertical travel of ram 48” 1219 mm Vertical travel of turret slide 38” 965 mm Horizontal travel of ram or turret slide (Table centre outwards) 66” 1676 mm Minimum distance between centre of ram and turret slide (dependent on tooling) 30” 762 mm Centre to face of cross slide 17” 432 mm Smallest dia. hole toolholder and ram will enter 11 ¾” 298 mm Smallest dia. hole turret slide will enter 28” 711 mm Maximum load on table 44800 lb 20320 kg Number of feeds 12 Range of feeds .0025 - .125 ins/rev. Number of speeds 12 Lhsdpfxeyyzxuo Akyof Range of speeds 2 - 53 rpm Main motor 50 HP Width 222” 5639 mm Front to back 186” 4725 mm Height 215” 5461 mm Approximate total weight of machine 100800 lb 45720 kg

Condition: used, Webster Bennett 48 Inch Elevating Rail CNC Vertical Borer. Serial Number 6644-1 Chuck manual 48 inch, supplied with jaws Hydraulic turret Fanuc 18i -T Control. Ledpfeymc Ipjx Akyohf Swarf conveyor Air conditioning Unit on Electrical Panel. 1250mm (approx. ) under tool to table.

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Lhsdpfx Aexg Nmkskysf Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL Lhodpfexp Na Nsx Akyjf GOOD SLIDES

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS 2 AXIS MITUTOYO DIGITAL READOUT 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT CLEAN CONDITION Lhsdpsxcn Hujfx Akyof

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Vertical Turning Lathe – WEBSTER & BENNETT R48R 2PB C-axis, driven tools Condition: Used Year of manufacture: 2006 CNC: Siemens 840D Powerline Technical Specifications Faceplate diameter: 1,200 mm Turning diameter: 1,200 mm Number of slides (ram): 1 Ram stroke: 1,200 mm Ram cross-section: 200 × 200 mm Max. workpiece height under crossbeam: 1,200 mm X-axis travel: 1,200 mm C-axis: available (C-Axis) Drives / Speeds Main spindle motor: 37 kW Main spindle speed: 0.2 – 430 rpm Lsdoxl E R Njpfx Akyshf Milling spindle motor: 17 kW Milling spindle speed: 20 – 3,000 rpm Tool changer Turning: 50 positions, Capto C6, robot handling Milling: 10 positions, ISO 50, robot handling Other features Magazine and stations for turret/tool holders Machine weight: approx. 18 t Scope of delivery as described above only. Further options/accessories only as per written agreement.

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar Ljdsymnryepfx Akyohf - metal slip roller - pawls - track - electric body lifting 0.55kW - central lubrication - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - track width: 360 mm - shaft width: 350 mm - max. saw blade diameter: 350 mm - blade hole diameter: 80 mm - max. cutting height: 120 mm from above: - pawls - toothed feed shaft - pawls - smooth sliding shaft - shaft with saw blades - pressure sliding shaft from below: - 2 sliding rollers in front of the table - guide - pawls - track - central track lubrication - electric lifting of the saw blade shaft - electric body lifting - stepless feed speed control Ledpfx Akoyz Ncwsyjhf - feed motor approx. 2.5 kW - main motor 30 kW - overall dimensions L/W/H 2500x2300x1900 mm - weight approx. 4000 kg ADVANTAGES – Czech manufacture – 2 sliding rollers in the table – used multi-blade saw – very good condition Net price: 31,900 PLN Net price: 7,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate changes, the price may be adjusted)

Condition: excellent (used), Catalogue number 7446 TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Pawls - Metal slip pressure roller - Pawls - Metal slip pressure roller - Shaft with saw blades - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Lsdpfoyz Tzwsx Akyehf Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7480 Ljdpfx Asyg Ip Eokyohf Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,710 mm, total length: 1,660 mm, total height: 2,975 mm, maximum load weight: 3,000 kg, tank capacity: 2,380 l, overall weight: 150 kg, year of last overhaul: 2026, Ultrasonic cleaning unit with a capacity of 2,380 litres. This ultrasonic cleaning machine is equipped with a pneumatic lifting platform with a load capacity of up to 1,500 kg. The lift has three main functions, which are: 1. To assist with the loading and unloading of parts to be cleaned. 2. Assisting with cleaning in hard-to-reach areas, creating a gentle movement of the fluid that helps remove loosened dirt particles. 3. Preventing the ultrasonic action from concentrating on a single point, thereby avoiding marking on the parts to be cleaned when these are made of soft metals such as aluminium or zamak. Ultrasonic cleaning system with patented technology This ultrasonic machine is designed to cover a wide variety of industrial applications. Some of the main applications include: Lhjdpfxeypcune Akyef 1. Parts cleaning: Metal parts or mechanical components requiring the complete removal of residues and oils prior to assembly. 2. Degreasing of parts: Removal of grease and oil in equipment manufacturing and maintenance. 3. Stripping and removal of adhered contaminants: Removal of rust, varnish and other impurities. 4. Cleaning in the mechanical industry: Removal of welding residues and particles from electronic components without damaging them.

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Ljdeyx Uy Aspfx Akyshf Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz Lhodpeyc Idbsfx Akyjf • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: excellent (used), I am offering a vacuum pump from the reputable brand BUSCH, model SV 1025 B. The device is fully functional – tested and ready for operation. Technical data: • Model: SV 1025 B Lsdsyxgc Aspfx Akyehf • Manufacturer: BUSCH • Country of manufacture: Switzerland • Ultimate pressure: 120 mbar • Type: vacuum pump for air and gases Applications: • vacuum installations • vacuum packaging • industry • production machinery Condition: The item is used, shows normal signs of use, and is in good technical condition. Fully operational. Included in the set: • BUSCH SV 1025 B pump • visible installation/connection

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Lhodpfxjw R S S Ee Akyof

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR600 Lhsdpfxjykqrdo Akyof Scope of delivery includes: 01x pallet rack beam, used Material color: similar to red-violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Locking clip: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams: 3,380 kg, with evenly distributed load. (Observe bay load limits) The beams feature a diagonal brace mounting! On each the left and right side of the beam end a bracket is welded on the locking clip edge! (Depth 90 mm – L: 50x50x5 mm) 02x safety pins, used Design: fully galvanized For securing the cross beams Note: The beams remain fully functional despite the holes! The beams come from an SSI project with heat protection panels that, according to the manufacturer, were bolted on! Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is desired, this is subject to additional costs. Please inquire separately with us, specifying your delivery location and required quantity.

Condition: excellent (used), Made of heavy cast iron – high rigidity and durability. Working opening approx. 120 mm (measured with a caliper). Adjustable pins with roller ends. Mounting through holes in the base – secure and stable installation. Very good condition, fully functional and ready for use. Ideally suited for machining shafts, tubes, rods, and other workpieces requiring support during turning. Lhodpfx Akow Sfpteysf

Condition: good (used), Technical data for the pallet rack beam: Lhodpfewqc Rgjx Akyef Racking system: Stow Type: Pal Rack NS The scope of delivery includes: 01x pallet rack beam, used Material color: RAL 2004 orange Box profile: 120 x 50 mm Beam type: PNB0442 Clasp: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of beams 2,058 kg with evenly distributed load 02x safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Note: Some beams have 5-6 holes on the side. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any further transport or dispatch of this item will incur additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Lhjdpfx Asxckftskysf Racking system: META Thyssen Included in delivery: 01x pallet rack beam, used Color: orange Beam type: HN 120|20 Box profile: 120 x 50 mm Bracket: 4 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x safety pins, used Design: fully galvanized For securing the longitudinal beams against unintentional removal Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply. Please inquire with us regarding the additional costs, as they depend on the delivery location and scope of delivery.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Dexion Type: P 90 Lhedpfx Aowffygokyef Included in delivery: 1x pallet rack crossbeam, used Material color: Sendzimir galvanized Box profile: 120 x 50 mm Crossbeam type: BX 120|50|13 Clamp: 5 HK Clear width: 2,700 mm Max. load per pair of crossbeams: 3,150 kg, with evenly distributed load. (Note bay load) 2x locking pins, used Version: Sendzimir galvanized For securing the longitudinal beams Your contact person in our company: Mr.: Andre Evening Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm Ljdpfx Akei Hkn Doyohf total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm Ljdpfxoi Hkn Io Akyshf hole distance (center - center hole): approx. 95 mm Weight: approx. 0.14 kg | pcs.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: SSI Schäfer Type: PR600 Included in delivery: 1x pallet rack crossbeam, used Material color: RAL 5010 Gentian Blue Box profile: 120 x 50 mm Crossbeam type: TRV1-280-125-30 CE Hooks: 5 HK (hook) Clear width: approx. 2,800 mm Max. load per pair of crossbeams: 3,000 kg, with evenly distributed load. 2x locking pins, used Version: fully galvanized For securing the longitudinal beams Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Ledpfxowb Dbue Akyehf General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: META Thyssen Included in the scope of delivery: 01x Pallet rack beam, used Material color: orange Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3 HK (hooks) Clear span: 2,700 mm 02x Locking pins, used Design: fully galvanized For securing the cross beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: Ljdpfxsxck R As Akyehf This article is only available for collection. Transport or shipping beyond this will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x mounting bracket, used Surface: hot-dip galvanized weight: 2,26 kg | pcs. Screw-on plate: 100 x 120 x 10 mm ( with 4 round holes Ø 10 mm ) Ledpfji A Ik Iex Akyehf screw-on flange: 120 x 140 x 10 mm ( 1 slotted hole 62 x 15 mm )