Used Wmw Dlz 450X1600 for sale (1,105)

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Nedjvy E A Sopfx Abzeld

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Nlsdpozmwp Hofx Abzed Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system Nljdpfey Tyy Djx Abzsd - some toolholders - steady

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Nljdpfoy Ar Nijx Abzjd Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 Nljdpfov Hckgsx Abzed - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Technical data: - Center height 250 mm - Center width 2000 mm - larger circulation - Ø over bed 490 mm - over cross slide approx. 300 mm - Spindle bore 72 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest Nlodpotiym Rjfx Abzsd - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Njdpfx Ajx Acpdjbzsld Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Nljdeu Av E Hopfx Abzjd

Condition: used, Year of construction: 1969, turning diameter over bed slide: 1,000 mm, turning length: 10,000 mm, TECHNICAL DATA: Circulation diameter over bed 1,000 mm Diameter in the recess 1,120 mm Circulation diameter over bed slide 690 mm Center height above floor 1,110 mm Center height above bed 460 mm Width of the bed 800 mm Width of the recess in front of the faceplate 550 mm Turning length 10,000 mm Max. Center width 10,535 mm Diameter of the faceplate 1,000 mm Diameter of the lead screw 60 mm Cross section of cutting steel 40 x 63 mm Maximum permissible workpiece weights Between centers, without setting vice 5,000 kg Two centers, with 1 setting vice 6,300 kg Between centers, with 2 setting sticks 8,000 kg Drive power of the main motor For speed series 1,2 22 kW For speed ranges 3,4,5,6 30 kW Speed of the main motor For speed ranges 1,2 1000 min-1 For speed ranges 3,4,5,6 1500 min-1 Number of work spindle speeds For speed series 1,3,5 22 For speed ranges 2,4,6 18 Page -2- Speed of the working spindle speeds For speed series 1 2.8...355 min-1 For speed series 2 7.1...355 min-1 For speed series 3 3.55...450 min-1 For speed series 4 9...450 min-1 For speed series 5 4.5...560 min-1 For speed series 6 11.2...560 min-1 Step change 1.25 Maximum permissible face plate speed 355 min-1 Nljdpju R Hzhsfx Abzjd 24 Normal longitudinal feeds 0.25...3.55 mm/rev 14 longitudinal feeds fine 0.05...0.224 mm/rev 24 normal face feeds 0.09...1.25 mm/rev 14 fine face feeds 0.018...0.08 mm/rev Thread pitches normal 22 pitches in mm 1...14 24 pitches in gear to one inch 28...2 18 pitches according to module 0.25...3.5 24 pitches according to diametral pitch 112...8 Fine thread - protruding values 1.5 Steep thread - protruding values 12 times Steep thread for speed series 1,3,5 With spider face plate - protruding values 32 times Maximum permissible workpiece weight Without setting vice 5000 kg With 1 setting vice 6300 kg With 2 setting vices 8000 kg Maximum torque 1700 mkp Characteristic speed for speed series 1,2 9 min-1 Characteristic speed for speed series 3,4,5,6 14 min-1

Condition: used, Stock number: 2841 Manufacturer: WMW Year of manufacture: 1961 Machine number: 3318/61 Type / Model: DLZ 355 Control: conventional Center distance: 2,000 mm Spindle bore: 35 mm Center height: 180 mm Nledpfx Absy Hgnzezjd Turning diameter over bed: 355 mm over carriage: 220 mm Speed range: 18 to 2,500 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Equipment: 4-way toolpost, leadscrew Power connection: 5.8 kW Condition: used Weight: 2.2 t Dimensions: 3,000 x 1,400 x 1,700 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, controller model: SIEMENS Sinumerik 840D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range X-axis: 750 mm Travel range Y-axis: 750 mm Travel range Z-axis: 725 mm B-axis: 360° Spindle mounting: HSK 63A Spindle speed: 50-10,000 rpm Spindle drive power 40/100% duty cycle: 37/24 kW Tool positions: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840D Machine length with chip conveyor: 6,100 mm Width (with control and additional magazine): 4,500 mm Nodszi Edkopfx Abzeld Installation dimensions internal cooling: 2,450 x 1,700 mm Installation dimensions spindle cooler: 800 x 900 mm Machine weight: approx. 15,000 kg EQUIPMENT NC rotary table with B-axis Magazine for 320 tools Pallet changer, 2 pallets 500mm x 500mm Internal coolant supply (80 bar) Chip conveyor Coolant system

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller model: SIEMENS Sinumerik 840D, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 680 mm B-axis: 360° Spindle speed (max.): 24,000 rpm Spindle taper: HSK 63A Tool positions: 80 MACHINE DETAILS Control system: Sinumerik 840D Machine weight: approx. 13,000 kg Nlsdpozi Ealjfx Abzsd EQUIPMENT NC rotary table with B-axis Magazine for 80 tools Pallet changing system, 2 pallets 400 mm x 400 mm Internal coolant supply (ICS) Chip conveyor Coolant system

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Nedpfxozmxzde Abzold Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T Nedpfjzmxy Tox Abzjld

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Njdpfjx U Ectjx Abzjld Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t Njdswx R Rdopfx Abzold dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this involute gear grinding machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: max. gear diameter: 7100 mm gear width: 1500 mm max. module: 45 table diameter: 4000 mm grinding wheel diameter x width: 400 x 500 mm max. helix angle: 45 degrees hobber diameter: 500 mm hobber speed: 9–63 rpm total power consumption: 47 hp Nledoxwlthopfx Abzod Machine weight: 160,000 kg A video of the machine can be sent via WhatsApp.

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 Nodpfxszmapie Abzjld clamping length max. 850 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers Nlsdpfx Ajzly Rqobzed number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Nljdezly Nmopfx Abzed Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1975, pressing force: 250 t, stroke length: 140 mm, table width: 750 mm, table length: 1,000 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t Nsdjzlnnwepfx Abzsld

Condition: good (used), Year of construction: 1994, pressing force: 250 t, stroke length: 500 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Njdezlnndspfx Abzsld Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1986, grinding depth: 500 mm, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: Grindable diameter with workpiece protection: internal / internal 20..400 mm; external 500 mm Max. workpiece diameter with workpiece protection: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Nljdpfx Abszlnmtozed Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: used, Type BF 63 Spindle mount: 4MT Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Nedpfx Abswrpy Rjzsld Table size: 900 x 710 mm Drilling travel: 560 mm Table load capacity: 2000 kg Rotary table: 360 degrees

Condition: good (used), Manufacturer: WMW VEB Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Table size: 200x630mm Nodpoik Hcujfx Abzsld