Used Wmw Dlz 630 Iv X2000 for sale (4,818)

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Knjdpfx Asu Av E Hjhisc

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Knedpfx Aoz Iz Hpohiec Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Ksdpfx Aox Acpdohisnc Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Technical data: - Center height 250 mm Kedpfx Ajtiym Rehisnc - Center width 2000 mm - larger circulation - Ø over bed 490 mm - over cross slide approx. 300 mm - Spindle bore 72 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Condition: used, Year of construction: 1981, functionality: fully functional, overall weight: 4,800 kg, total height: 1,800 mm, total width: 3,500 mm, total length: 3,200 mm, Grinding machine NILES ZSTZ 315/630 C2 Max. wheel diameter: 315 mm Max. module: 10 Min. module: 1.5 Max. gear width: 160 mm Max. workpiece weight: 200 kg Engine power: 8 kW Machine dimensions: 3.2 x 3.5 x 1.8 m Knedpsz Tc Akjfx Ahioc Machine weight: 4.8 t

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Specifications: Swing: 1,000 mm Centers: 8,000 mm Knjdpfjzvrrhox Ahiec

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. Knedpfx Ahsy Ar Nisiec The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 Kodpoy Tyy Defx Ahionc turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders - steady

Condition: repair required (used), Machine number: 1464 Type / Model: FUW 250/IV Travel ranges x-y-z: 400 - 220 - 400 mm Table: 630 x 350 mm Table clamping area: 700 x 300 mm Speed range: 45 to 2,240 rpm Kedpfsd Hl Stsx Ahienc Spindle connection: SK 40 Feed rate range, longitudinal: 6.3 to 1,250 mm/min Feed rate range, transverse: 6.3 to 1,250 mm/min Power consumption: 7.4 kW Accessories / Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Kodpfxoxwltho Ahienc Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: good (used), Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm Knodpe Aax Unsfx Ahioc

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW Kedpfxov Hckgs Ahijnc - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97 09 05 010 1/2, filter pressure: 15 bar, pressure: 15 bar, cake thickness: 25 mm, warranty duration: 12 months, year of last overhaul: 2026, operating pressure: 380 bar, number of chambers: 25, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, Good day, Knodpfx Aezt Nc Ejhijc We have two identical chamber filter presses in stock, which have been completely overhauled and are therefore in new condition. They are immediately available! Please see the attached photos: Chamber filter press – manufactured by MSE with plate thickness: 50mm each with an additional set of plates cake thickness: 25mm volume: approx. 210 l useful length approx. 1800mm (34 plates) format: 630x630 mm dimensions: 3700x1100x1800 mm (l x w x h) empty weight: 2700kg open filtrate discharge plate transport manual hydraulics electric Please let us know if you are interested in this press. We would be happy to send you a customized offer. Price on request.

Condition: used, Year of construction: 1969, turning diameter over bed slide: 1,000 mm, turning length: 10,000 mm, TECHNICAL DATA: Circulation diameter over bed 1,000 mm Diameter in the recess 1,120 mm Circulation diameter over bed slide 690 mm Center height above floor 1,110 mm Center height above bed 460 mm Width of the bed 800 mm Width of the recess in front of the faceplate 550 mm Turning length 10,000 mm Max. Center width 10,535 mm Diameter of the faceplate 1,000 mm Diameter of the lead screw 60 mm Cross section of cutting steel 40 x 63 mm Maximum permissible workpiece weights Between centers, without setting vice 5,000 kg Two centers, with 1 setting vice 6,300 kg Between centers, with 2 setting sticks 8,000 kg Drive power of the main motor For speed series 1,2 22 kW For speed ranges 3,4,5,6 30 kW Speed of the main motor For speed ranges 1,2 1000 min-1 For speed ranges 3,4,5,6 1500 min-1 Number of work spindle speeds For speed series 1,3,5 22 For speed ranges 2,4,6 18 Page -2- Speed of the working spindle speeds For speed series 1 2.8...355 min-1 For speed series 2 7.1...355 min-1 For speed series 3 3.55...450 min-1 For speed series 4 9...450 min-1 For speed series 5 4.5...560 min-1 For speed series 6 11.2...560 min-1 Step change 1.25 Maximum permissible face plate speed 355 min-1 24 Normal longitudinal feeds 0.25...3.55 mm/rev 14 longitudinal feeds fine 0.05...0.224 mm/rev 24 normal face feeds 0.09...1.25 mm/rev 14 fine face feeds 0.018...0.08 mm/rev Thread pitches normal 22 pitches in mm 1...14 24 pitches in gear to one inch 28...2 18 pitches according to module 0.25...3.5 24 pitches according to diametral pitch 112...8 Fine thread - protruding values 1.5 Knodju R Hzhepfx Ahiec Steep thread - protruding values 12 times Steep thread for speed series 1,3,5 With spider face plate - protruding values 32 times Maximum permissible workpiece weight Without setting vice 5000 kg With 1 setting vice 6300 kg With 2 setting vices 8000 kg Maximum torque 1700 mkp Characteristic speed for speed series 1,2 9 min-1 Characteristic speed for speed series 3,4,5,6 14 min-1

Condition: good (used), Year of manufacture: 1963 Machine number: 47 Type / Model: DLZ 355x1600 Control: conventional Center distance: 1,600 mm Bore: 35 mm Center height: 180 mm Swinging diameter over bed: 355 mm Swinging diameter over carriage: 180 mm Swinging diameter in the headstock: 700 mm Spindle speed range: 18 to 2,500 rpm Feed rate, longitudinal: 0.011 to 1.000 mm/rev Connection: 5.8 kW Accessories/Equipment: 3-jaw chuck 200 mm; 4-position tool holder, guide rest Condition: good, ready for use Weight: 2.2 t Knjdsznbt Sjpfx Ahiec Footprint: 2,700 x 450 mm Dimensions: 3,000 x 1,100 x 1,300 mm

Condition: used, Year of construction: 1962, turning diameter over bed 630 mm turning diameter over slide rest . mm turning length 3150 mm Number: 16304188/ weight 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Knodpfjyqv Iwjx Ahiec We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Knsdpfx Ajvy E A Sehisc

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Knedpfx Aozukufshioc

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Kjdpszukt Iefx Ahienc

Condition: used, Stock number: 2841 Manufacturer: WMW Year of manufacture: 1961 Knsdpfx Aey Hgnzshioc Machine number: 3318/61 Type / Model: DLZ 355 Control: conventional Center distance: 2,000 mm Spindle bore: 35 mm Center height: 180 mm Turning diameter over bed: 355 mm over carriage: 220 mm Speed range: 18 to 2,500 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Equipment: 4-way toolpost, leadscrew Power connection: 5.8 kW Condition: used Weight: 2.2 t Dimensions: 3,000 x 1,400 x 1,700 mm

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Technical data: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable Kedpfxet Dxwgj Ahionc - Horizontal spindle counter holder - Machine vice

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm Kjdpfx Ahsvbhv Rsisnc range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min Kjdpfxozuyfae Ahijnc spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: used, Year of construction: 1965, faceplate diameter 5300 mm swing diameter 6300 mm Kedjyqt R Aepfx Ahisnc turning height 2800 mm slide adjustment 1700 mm table load 50 t turning speeds 0,3-14 U/min Feed 0,056-10 mm/U digital readout Sony Rest 2 total power requirement 120 kW weight of the machine ca. 187 t No:11670009-05rer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Knodpfjxln Iwex Ahiec Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.