Used Wmw Erfurt Pee 400-I for sale (68,727)

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. Kjdou N A Uujpfx Akienc *

Condition: good (used), Year of construction: 1975, pressing force: 250 t, stroke length: 140 mm, throat depth: 400 mm, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Knedpfxs Aawpws Akioc Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! Ksdpfou N A U Iex Akijnc in progress. *

Condition: used, rated capacity 23 kW rated current 43 A voltage 400 V Knjdpfx Ajucgniekijc For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Knsdeykl Iaspfx Akiec Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € Knsdpfx Akjz H Ttxeioc * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm Kedpfxju Nfkls Akienc table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press - Condition: Good Knedpfx Aoyvzzzekijc - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request.

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Kodpfx Aju Nfinokijnc Accessories: - Steel plate 1170x860x80mm *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel Kjdpfxsu N Ddwj Akionc accessory: - foot plate 2200x1500x40mm *

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Ksdemi Rpijpfx Akionc 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased diameter and extended, hydraulic transverse movement! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau, and put into operation in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Diameter of workpiece protection ring max.: 800 mm Diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of internal grinding device on the table: max. 545 mm Transverse movement of workpiece spindle stock: max. 650 mm Swiveling of workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Transverse adjustment: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Dimensions & Weight Machine: 4100 x 2200 x 2500 mm Europallet with accessories Coolant tank: 1700 x 800 x 750 mm on Europallet Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixators or machine feet Various grinding wheels Diamond dresser Large grinding plate Kodpozqcvtefx Akisnc Internal and surface grinding device Halogen machine lamp Machine documentation

Condition: used, turning height: 1,400 mm, turning diameter: 4,000 mm, faceplate diameter: 3,500 mm, Technical data: CNC control Siemens 802 D Dead weight 66 tons Drive power 63 kW Installation dimensions 13,600x9,800x6,750 mm Face plate diameter 3,500 mm Max. Workpiece height 2,000 mm Max. Support adjustment 30 degrees Max. Workpiece diameter 4,000 mm Max. Workpiece diameter with side support 3,750 mm Number of supports 2 Max. Turning height 1,400 mm Max. Workpiece weight 25 to Max. Speed 30/min Min. speed 1/min Kjdpfju R Ezyex Akisnc

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel distances Travel distance X: 1350 mm Travel distance Y: 970 mm Travel distance Z: 1300 mm with measuring system from Haidenhain Pallet size: 800 x 1000 mm Table load: 2000 kg Horizontal/vertical milling table Working spindle Diameter at the front bearing: 110 mm Drive power: (60% duty cycle) 30 kW Drive power: (100% duty cycle) 29 kW Torque: (60% duty cycle) 1088 Nm Torque: (100% duty cycle) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece weight incl. fixture up to 60 rpm 2000 kg Workpiece weight incl. fixture above 60 rpm 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100% duty cycle) 57 kW Drive torque (100% duty cycle) 2520 Nm Machine is equipped with automatic imbalance detection Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 kg Knodpfx Ajz Nc Eijkijc Internal coolant supply through the spindle center up to max. 80 bar Additionally: - Coolant gravity band filter from Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 from Renishaw Net machine weight with H/V table approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Technical data without guarantee. Errors and prior sale reserved.

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Kodpfe Aayn Aex Akisnc Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Kodpfx Aey In Avskijnc Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Kjdpfx Akoy In Apsijnc

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Knjdoxyllvopfx Akijc Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Knedpfozww R Sjx Akisc

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm * Knedpfxou Nurxs Akisc

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position Knjdpfxsz H Tn Aj Akiec * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: good (used), Year of construction: 1998, functionality: fully functional, Machine was overhauled in 2017! -Distance from the workpiece spindle head to the front edge of the internal grinding spindle carrier: max. 540mm -Longitudinal adjustment of the internal grinding unit on the table: max. 210mm -Feed rate: 0.0005mm -Grinding head mounting bore: Ø 80mm x L: 180mm Equipment: -Truing device with diamond insert Work performed: -Guides renewed -Grinding spindle overhauled Knedpfxjz Rm Swj Akisc -Machine completely disassembled and wear parts replaced -Repainted

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V Knedpfx Ajwx R Rdjkiec height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Knsdpfeztrvnjx Akioc Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets Knjdpfx Aez H Tqdokisc - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock