Used Wmw Gotha Ubr 10 X 2000 /1-16 for sale (108,463)

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Codpfx Ahoz Iy Tusmehc Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 1980, number of straightening rollers: 16, working width: 1,250 mm, sheet thickness (max.): 12 mm, overall weight: 24,825 kg, Manufactured by BLEMA GOTHA (Germany) Max sheet thickness, mm 12,5 Chsdozap Rwepfx Ahmoc Max sheet width, mm 1250 Number of straightening rollers: 16 Straightening speed, m/min 16 Motor capacity, kW 54 Machine weight, kg 24825 Sheet leveling machine BLEMA GOTHA UBR 12,5 x 1250 / 1-16 The WMW UBR 12.5 x 1250/1-16 is an industrial multi-roller sheet straightening machine. Machine is complete and could be prepared for immediate shipment.

Condition: good (used), Year of construction: 1980, 13 rolls, diameter 140 mm plate width: max. 2.000 mm Cjdpfx Asdnzr Ujhmshc plate thickness: 4 - 10 mm

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg Codpfjz H Ttxox Ahmehc * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Cjdoz Izgispfx Ahmshc Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: like new (used), Year of construction: 2025, functionality: limited functionality, spindle motor power: 60 W, turning length: 9,000 mm, turning diameter over cross slide: 1,400 mm, spindle speed (max.): 160 rpm, turning diameter: 1,600 mm, overall weight: 35,500 kg, rotational speed (max.): 160 rpm, rotational speed (min.): 1 rpm, total width: 2,000 mm, total length: 12,000 mm, working length: 10,000 mm, workpiece weight (max.): 16,000 kg, turning diameter over bed slide: 1,600 mm, power: 60 kW (81.58 HP), warranty duration: 12 months, Machine in like-new condition with CNC, undergoing retrofit. Built originally in 1990, has few working hours due to the factory closure. Fully modernized equipment: electric, electronic, hydraulic, cable, portable chains; new CNC(2025 Edition). Mechanically in like-new condition, fully inspectable. Partially dismantled due to space constraints, partially in operation until installation is completed. Can be inspected at any time, suitable for heavy industrial use. For more technical details, please send request. Price: quote on request. Delivery/installation: transportation options and installation quote available at request. Chjdjygk I Djpfx Ahmjc Testing on delivery: available Warranty: 1 year mechanical, electric, hydraulic, 2 year CNC equipment.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Codpfxoxxvqaj Ahmohc

Year of construction: 1985, condition: good (used), 21 rolls, diameter 60 mm Chodpfjgq Dz Uox Ahmec plate width: max. 2.000 mm plate thickness: 0,8 - 3,15 mm

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Cedpfoz Iy T Iex Ahmehc Total load: 138 kW

Condition: used, grinding diameter 1300 mm grinding length 6100 mm grinding wheel diameter 1300 mm voltage 400 V Csdpfx Ahoz Icxtjmshc drive capacity - workpiece 23 kW centre distance 6500 mm max. dia. of grinding wheel 750 mm total power requirement 50 kW weight of the machine ca. 35 t 2 x Heavy Duty Steadies Coolant System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Chedpfezulg Nsx Ahmjc

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 2-16 mm bore stroke: 140 mm drill spindle - Morse Taper: MK 3 spindle throat: 280 mm spindle distance: 455 mm headstock adjustment: 250 via Hand - Kurbel mm feed:: 0,08 - 0,12 - 0,20 - 0,31 / 4 steps mm/U feed:: automatic + manuell spindle speed:: 180 - 2000 / 8 steps U/min distance between table/spindle: min. 3x 140mm und 1x 260mm mm distance between table/spindle: max. 3x 700mm und 1x 820mm mm table surface area: 1800 x 350 mm table adjustment: 300 via Hand mm total power requirement: 6,3 kW weight of the machine ca.: 2,4 t dimension machine xH: 2,1 x 0,9 x 2,2 m Application: Drilling, countersinking; reaming and thread cutting. Each drill spindle has its own drive motor Chodpeu Idugofx Ahmsc Equipment: Foot pedal/operation Hand crank *

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Chjdpfx Aevy E A Sjhmoc

Condition: used, Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible. Chsdszwpg Ejpfx Ahmsc

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390/455 mm feed: quer: 0,3-3,5 mm table adjustment: längs 1150 mm table speed: 2,5-25 m/min Table dimensions: 2120 x 600 mm magnetic plate size: 1000 x 315 x 100 mm table surface area: 1160 x 315 mm feed of spindle: 0,002 - 0,05 mm distance table - spindle center: max. 550 mm throat of the spindle nose: 200-580 mm grinding spindle speed: 1500 / 3000 U/min total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 1,3x1,4x1,95 m dimension coolant device LxWxH: 0,7x0,7x0,55 m - coolant device (Tank with pumps) - 2 pieces grinding disc intakes - 4 pieces machine base i.D. Cjdpfxou Nggzj Ahmshc *

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t Cedemi Rpijpfx Ahmjhc

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 clamping length max. 850 mm Chodpfxezmapij Ahmoc weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: used, Year of construction: 1964, Technical details: shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. centering block: -prismatic guide accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder Cedpsu Ngr Dsfx Ahmehc -div. clamping and auxiliary tools *

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm clamping length 1000 mm weight of the machine ca. 0,6 t Chjdpfx Ahjunt Egsmec dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Technical data: - Center height 250 mm - Center width 2000 mm - larger circulation - Ø over bed 490 mm - over cross slide approx. 300 mm Chjdetiym Rjpfx Ahmsc - Spindle bore 72 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm strip width: max. 1.250 mm Csdpfx Ahsrrl Ujmehc strip thickness: 0,6 - 4 mm

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process. Chodpfx Aheykl Nkomjc

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Chodpoz Iz Hpsfx Ahmoc Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm Cjdpfx Ahev Hckgemshc - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: used, Year of construction: 1969, turning diameter over bed slide: 1,000 mm, turning length: 10,000 mm, TECHNICAL DATA: Circulation diameter over bed 1,000 mm Diameter in the recess 1,120 mm Circulation diameter over bed slide 690 mm Center height above floor 1,110 mm Center height above bed 460 mm Width of the bed 800 mm Width of the recess in front of the faceplate 550 mm Turning length 10,000 mm Max. Center width 10,535 mm Diameter of the faceplate 1,000 mm Diameter of the lead screw 60 mm Cross section of cutting steel 40 x 63 mm Maximum permissible workpiece weights Between centers, without setting vice 5,000 kg Two centers, with 1 setting vice 6,300 kg Between centers, with 2 setting sticks 8,000 kg Drive power of the main motor For speed series 1,2 22 kW For speed ranges 3,4,5,6 30 kW Speed of the main motor For speed ranges 1,2 1000 min-1 For speed ranges 3,4,5,6 1500 min-1 Number of work spindle speeds For speed series 1,3,5 22 Cedpeu R Hzhefx Ahmjhc For speed ranges 2,4,6 18 Page -2- Speed of the working spindle speeds For speed series 1 2.8...355 min-1 For speed series 2 7.1...355 min-1 For speed series 3 3.55...450 min-1 For speed series 4 9...450 min-1 For speed series 5 4.5...560 min-1 For speed series 6 11.2...560 min-1 Step change 1.25 Maximum permissible face plate speed 355 min-1 24 Normal longitudinal feeds 0.25...3.55 mm/rev 14 longitudinal feeds fine 0.05...0.224 mm/rev 24 normal face feeds 0.09...1.25 mm/rev 14 fine face feeds 0.018...0.08 mm/rev Thread pitches normal 22 pitches in mm 1...14 24 pitches in gear to one inch 28...2 18 pitches according to module 0.25...3.5 24 pitches according to diametral pitch 112...8 Fine thread - protruding values 1.5 Steep thread - protruding values 12 times Steep thread for speed series 1,3,5 With spider face plate - protruding values 32 times Maximum permissible workpiece weight Without setting vice 5000 kg With 1 setting vice 6300 kg With 2 setting vices 8000 kg Maximum torque 1700 mkp Characteristic speed for speed series 1,2 9 min-1 Characteristic speed for speed series 3,4,5,6 14 min-1