Used Wmw Vertical Milling Head for sale (22,217)

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left Iedpeu N E Abefx Anweau - clamping area 500 x 400mm *

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm Isdjv U I Sljpfx Anwjau *

Condition: used, Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head Isdpfsu Nlgysx Anwjau *

Condition: used, Vertical milling head, milling head with motor drive THIEL Iaedpfxjxddwrj Anwju Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 taper, quill stroke 100 mm, rated drive power approx. 3-4 kW, max. speed 2000 rpm, … Special accessories: - Multiplicator, gear ratio 1:4, ISO 40 taper Price: 499.00 EUR - Attachment for automatic feed device for vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR - Horizontal milling head, auxiliary head for vertical milling head with ISO 30 spindle taper, swivels 360 degrees Price: 585.00 EUR Plus statutory VAT. Iaedpfx Ajddtwbsnwsu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Iedpfsd Dk A Asx Anwjau Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: good (used), 1 used, well-maintained vertical milling head with large overhang, previously installed on a PAMA (Origin Italy) boring mill. Spindle taper: SK 50 Overhang: 660 mm Flange dimensions: 465 x 440 mm Internal bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions (L x W x H): 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Continuously adjustable angle, manual • 4 fixed indexing points at 90° each with locating pins • Tool clamping with drawbar • Suitable for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, swivels left/right, manual tool clamping, ... Ijdpfoyc Nhhjx Anwoau Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Iodpfxjxf Ur Ne Anwjau

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Iaodjzd N Szopfx Anwju Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Condition: used, Year of construction: 2010, control Siemens Sinumerik spindle tunring speed 10.000 U/min engine 15 KW weight 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th/5th axis Ijdpfx Anszd Hfrjwoau Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 500 mm z-travel 540 mm Control Heidenhain TNC530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 24 Pos. Number of working hours ca. 41.344 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel - Chip conveyor - Coolant system - Machine documentation - Control system documentation - 3D probe - Air purifier Iaodpfx Aozd Hflsnweu - Tool setter Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Ijdpfx Anjx Iwg Rewoau

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. Ijdpfx Anoxxmmrswjau In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 Isdpfewth Sbjx Anwoau number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Vertical head MWM Ruhla SK 40 Iasdpfx Aszdub Ionwou Pinion travel 80 mm Diameter of mounting flange 180 mm Bolt circle diameter 135 mm Four mounting holes, diameter 15 mm Diameter of centering pin 75 mm Height 500 mm Width 190 mm Depth 250 mm Weight 50.5 kg

Condition: not inspected (used), Faceplate: 2500 mm Iedpfszdk A Usx Anweau Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: used, Year of construction: 2001, x-travel 600 mm Iasdpszdvglsfx Anweu y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t

Condition: excellent (used), 1 used, very well-maintained universal milling head, System "HURON", with hydraulic tool clamping and a blow-out function for cleaning the taper socket. Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 SK - ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel table system "HURON" Iasdozdbxbjpfx Anwou • Hydraulic tool clamping • Blow-out function for cleaning the spindle socket • For retrofitting to conventional, NC or CNC milling machines and panel saws or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) This high-quality milling head was used as a loaner milling head and was only used for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, We offer this used Langbow TM32-2M Twin Head Tube Bender, year of construction [not specified]. Manufacturer: Langbow Model: TM32-2M Condition: used Type: Twin Head Tube Bender The following tooling is included with the bender, 7/8"s Round Twin Tube Twin Bend 50mm Radius, 5/8"s Round Twin Tube Single Bend 60mm Radius, 1" Inch Round Single Tube Twin Bend 50mm Radius, 1" Inch Square Single Tube Twin Crush Bend 15mm Radius, 1" Inch Square Single Tube Twin Crush Bend 50mm Radius Iedpfxsza Eqme Anwsau If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, table length: 1,200 mm, table width: 500 mm, table load: 500 kg, CNC Vertical Milling Machine DEFUM AFM BACA R1000 Vertical milling machine DEFUM AFM BACA R1000 available for sale, suitable for precise machining in both single-piece and serial production. The machine features a rigid construction ensuring stable and efficient operation. The machine is available for inspection upon prior arrangement. Technical specifications: Table: Working area: 1200 × 500 mm Number of T-slots: 5 T-slot width: 14 mm T-slot spacing: 100 mm Max. table load: 500 kg Travels: X-axis (longitudinal): 1000 mm Y-axis (cross): 510 mm Z-axis (vertical): 560 mm Spindle: Tool taper: BT40 Speed range: 45 – 10,000 rpm Tool magazine: Number of tools: 16 + 16 Ijdeywvtnopfx Anwoau Dimensions and weight: Length: approx. 2950 mm Width: approx. 2300 mm Height: approx. 2750 mm Weight: approx. 4000 kg Additional information: Transport can be arranged Machine testing possible upon request Technical support and consulting available

Condition: reconditioned (used), machine/vehicle number: 05640, functionality: fully functional, power: 2.3 kW (3.13 HP), input voltage: 230 V, input current: 12 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 130 mm, tilt adjustment saw blade: 60 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 2,200 rpm, overall weight: 16 kg, Equipment: saw blade guard, Used circular saw for carpentry, FESTO AXP 132 E Technical data: Power consumption 2,300 W Speed 2,200 rpm Bevel adjustment for sawing 0-60° Bevel adjustment for routing 0-45° Cutting depth at 90° 50-132 mm Cutting depth at 45° 90 mm Cutting depth at 60° 60 mm Weight 16 kg The circular saw currently has a grooving cutter head installed (160x80x30 mm). For reverting to a standard circular saw, the protective cover and clamping flange are included (not visible in the pictures). A saw blade is not included. The machine has been workshop-tested and is fully functional. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is, of course, also possible. Shipping is via UPS. Shipping costs within Germany: €11.90. Iedpfszc Edlex Anwsau If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2012, functionality: fully functional, Milling head debarking, max. 6000 mm length, 35 kW, with mechanization. Iasdpfx Ansxpuzrowju

Condition: used, inner taper of milling spindel / collet diameter / Iasdpfx Anezcq H Eewju turning speed range / U/min

Condition: used, inner taper of milling spindel / collet diameter / Iedpszcq Hrofx Anwsau turning speed range / U/min

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours. Iaodpfow Ed U Nsx Anwsu