Used Zmm C 10 Tms for sale (72,723)

Condition: new, neu Bulgarien 85520 € 1616.33 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck Ledpjyq Sn Tefx Am Neaa toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 71 280,00 turning length2.000 mm € 74 190,00 turning length4.000 mm € 91 680,00 turning length5.000 mm € 104 390,00 turning length6.000 mm € 1 230,00

Condition: new, neu Bulgarien 91920 € 1737.29 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 M 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" Lsdpfjyq Sm Ajx Am Noaa FURTHER TURNING LENGTHS: turning length1.500 mm € 77 680,00 turning length2.000 mm € 80 590,00 turning length4.000 mm € 98 080,00 turning length5.000 mm € 110 890,00 turning length6.000 mm € 124 730,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107870 € 2038.74 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Lsdpfx Aowirghsm Nsaa Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107970 € 2040.63 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm Laedpfx Ajwiq E Asm Nea 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Laodpjwiq Drjfx Am Nsa Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 82740 € 1563.79 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm Ledpfjwiq Rxox Am Nsaa 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 68 870,00 turning length2.000 mm € 71 780,00 turning length4.000 mm € 88 640,00 turning length5.000 mm € 101 200,00 turning length6.000 mm € 114 800,00

Condition: new, neu Bulgarien 77840 € 1471. € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device Lodpfewiq Rrex Am Noaa foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 63 970,00 turning length2.000 mm € 66 880,00 turning length4.000 mm € 83 740,00 turning length5.000 mm € 96 300,00 turning length6.000 mm € 109 900,00

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, center height: 500 mm, center width: 700 mm, turning length: 3,000 mm, Parallel Lathe ZMM-SIBIMEX CU 1000/3000 Year of manufacture: 2007 CE certified Excellent overall condition Centre height: 500 mm Maximum turning length: 3000 mm Swing over bed: 1090 mm Swing over carriage: 690 mm Swing in gap: 1250 mm Spindle bore: 155 mm Bed width: 700 mm Motor power: 22 kW Approx. weight: 8000 kg Number of speeds: 24 Spindle speed range: 6.3 - 1250 rpm Speed range Machine complete with fixed and travelling steady rests Self-centering chuck 4-jaw faceplate Lsdpfoylazwsx Am Nsaa Powered tailstock Elbo axis DRO Rapid traverse on feeds

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON Lsdoqv Iw Tepfx Am Noaa - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: new, neu Bulgarien 127060 € 2401.43 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 M 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" Ledpfxsyq Sr Sj Am Noaa 240 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 112 010,00 turning length4.000 mm € 135 240,00 turning length5.000 mm € 146 580,00 turning length6.000 mm € 163 380,00

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 6,000 mm, spindle motor power: 30 W, The lathe is in good technical condition, connected and ready for testing. It features digital readout, faceplate, and steadies. Ledsx A S Sbjpfx Am Neaa Specifications: Swing diameter over bed: 1,090 mm Distance between centers: 6,000 mm Swing diameter over cross slide: 700 mm Main drive motor power: 30 kW Dimensions (L x W x H): 8,200 x 1,800 x 1,855 mm Machine weight: 11,000 kg

Condition: good (used), Year of construction: 1998, ZMM Sliven - CU 1000 steady rest Lsdpfx Ajx Ttfasm Neaa

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min feed quer 0,003 - 0,885 m/min total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light Laodpfx Ajtycpasm Noa - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

Condition: used, Year of construction: 2004, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm Laodpoxaa D Tsfx Am Noa spindle bore 32,0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Condition: excellent (used), Year of construction: 2007, Technical data: Centre height: 500 mm Swing diameter: 1090 mm Swing diameter over cross slide: 690 mm Centre distance: 1500 mm Spindle speeds: 6 – 1250 rpm Spindle bore: 155 mm Digital position display: SONY Bed width: 700 mm Tool holder: MT 6 Motor power: 30 kW CE marking Dimensions (L x W x H): approx. 3500 x 1750 x 1900 mm Weight: approx. 7.5 t Accessories: Central lubrication Coolant system Rear splash guard 3-jaw chuck 500 mm 4-jaw chuck 800 mm Lasdjxlgmfspfx Am Nja The seller is not liable for typographical or data transmission errors. The machine’s condition regarding appearance, technical characteristics, and wear is in accordance with its age; used machines are sold without any warranty.

Condition: new, neu Bulgarien 115600 € 2184.84 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U Lajdpewiqv Uofx Am Nsa 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6.000 mm € 151 230,00

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Lodpfx Asyu R Nkem Njaa Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: new, neu Bulgarien 55100 € 1041.39 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100; 80 - 400; 400 - U/Min 120 Lajdjyq Stpspfx Am Noa 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 52 250,00 turning length1.500 mm € 53 290,00 turning length3.000 mm € 59 990,00 turning length4.000 mm € 65 540,00 turning length5.000 mm € 80 860,00

Condition: new, neu Bulgarien 40850 € 780.24 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard Ledoyq Stiepfx Am Nsaa leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 41.580,-

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection Ledpfxoxzuu Ae Am Neaa safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 47390 € 905.15 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 21 20 - 2000 1/min Lajdewiqz Dopfx Am Nja 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Ledpfouladksx Am Njaa

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Laodpexdi Ezofx Am Nea Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2020, gebraucht 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 Ledpfx Aewirdtem Nsaa 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 36,070.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"

Condition: as good as new (ex-display), lifting height: 22,000 mm, Year of construction: 2025, operating hours: 7 h, Drivetrain Make of engine: OX Weights Empty weight: 4.700 kg Functional Length of jib: 5 m Lifting capacity: 4.000 kg CE mark: yes Ledpey Elggjfx Am Noaa Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Maximum lifting capacity at end of jib: 700 kg Hook height horizontal jib: 1800 cm Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2026-04-20 Production country: NL Additional information Please contact Martyn Joosse for more information = Additional options and accessories = - Hook blocks