Used Zmm C 400 Ts for sale (67,521)

Condition: new, neu Bulgarien 40850 € 780.24 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm Ncjdpfx Ajyq Stiekyjr 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 41.580,-

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 Njdpfxexzuu Ao Akyjcr 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Ncjdpeuladkjfx Akysr

Condition: used, Year of construction: 2020, gebraucht 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm Nedewirdtjpfx Akyecr 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 36,070.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE"

Condition: as good as new (ex-display), rotating bezel Make Bulmak type C 400 TS Height 160 mm Height from clamping surface to middle of steady rest. 160 mm maximum shaft diameter 110 mm weight 14 kg Ncsdpfxjf I Smzs Akyor

Condition: used, mileage: 800,000 km, power: 294 kW (399.73 HP), first registration: 04/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro3, loading space length: 6,550 mm, loading space width: 2,540 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, Volvo FH 13 400 / 6x2 Platform 6,55 m + CRANE Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2006 ? MILAGE: 800 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 655 x 254 (L x W ) HEIGHT FROM THE GROUND : 90 CAPACITY: 13 500 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 280/140 cm Nedpjymvhvofx Akyscr TIRE SIZE: FRONT : 385/55R22,5 BACK : 295/60R22,5 SUSPENSION: AIR CRANE: HIAB XS 200 C - 5 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 9857

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing Ncodsyc H N Nspfx Akyer • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Nsdpfxjv Rpn Ts Akyecr We cordially invite you to cooperate!

Condition: good (used), mileage: 945,652 km, power: 291 kW (395.65 HP), first registration: 02/2014, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, spoiler, General information Model code: ### Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.354 kg Carrying capacity: 12.146 kg GVW: 19.500 kg Interior Interior: grey Ncjdey Ai Rqepfx Akyor Number of seats: 2 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Aluminium fuel tank - Armrest - Car kit - Low-noise - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto

Condition: new, For sale: Carrier fan coil units available in large quantities. Suitable for various cooling and climate control applications. Brand: Carrier Type: Fan coil units (various models/sizes) Availability: Large lot Application: Cooling/heating (depending on model and configuration) Conditions: All units are sold strictly as-is. Ex stock / transport can be arranged by agreement. Contact us for current inventory, specifications, photos, and a competitive quotation. Ncodpfx Aoylu R Tjkyer

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module Nodpfjyu R Nkox Akyscr 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: new, neu Bulgarien 55100 € 1041.39 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW Nsdsyq Stpjpfx Akyecr 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 52 250,00 turning length1.500 mm € 53 290,00 turning length3.000 mm € 59 990,00 turning length4.000 mm € 65 540,00 turning length5.000 mm € 80 860,00

Condition: new, neu Bulgarien 85520 € 1616.33 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock Ncedeyq Sn Topfx Akysr low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 71 280,00 turning length2.000 mm € 74 190,00 turning length4.000 mm € 91 680,00 turning length5.000 mm € 104 390,00 turning length6.000 mm € 1 230,00

Condition: new, neu Bulgarien 91920 € 1737.29 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 M 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) Nedpjyq Sm Aefx Akyecr 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 77 680,00 turning length2.000 mm € 80 590,00 turning length4.000 mm € 98 080,00 turning length5.000 mm € 110 890,00 turning length6.000 mm € 124 730,00

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 80 mm, turning diameter: 400 mm, center height: 220 mm, turning length: 1,500 mm, quill stroke: 230 mm, quill diameter: 90 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 240 mm, bed width: 400 mm, Equipment: rotational speed infinitely variable, Production Lathe MEXPOL TUS 400 – Available from Stock The MEXPOL TUS 400 is a high-performance production lathe ideal for precise and efficient machining tasks. With its robust construction, powerful main drive, and comprehensive standard equipment, this machine is perfectly suited for continuous industrial operation. Technical Specifications • Center height: 220 mm • Swing diameter over bed: 400 mm • Swing diameter over cross slide: 240 mm • Distance between centers: 1,500 mm • Bed width: 400 mm • Spindle bore: 80 mm • Spindle mount: DIN 55027 / 8 • Main drive: 11 kW with frequency inverter • Speed range: 25 – 2,000 rpm (3 gear stages) • Maximum spindle torque: 1,200 Nm • Max. workpiece weight: o Between centers: 150 kg o In chuck with tailstock: 600 kg o With steady rest: up to 1,300 kg • Accuracy according to DIN 8606 • Electrical equipment: 400 V / 50 Hz • Noise level: max. 84 dB(A) Feeds and Thread Cutting • Longitudinal feed: 0.04 – 12 mm/rev • Cross feed: 0.02 – 6 mm/rev • Rapid traverse longitudinal / cross: 3,800 / 1,900 mm/min • Metric, imperial, module, and DP threads without change gears Slides • Cross slide travel: 315 mm • Top slide travel: 130 mm Tailstock • Quill diameter: 90 mm • Quill taper: Morse taper MT 5 • Quill stroke: 230 mm Weight • Machine weight: approx. 2,500 kg Standard Equipment (excerpt) Ncodjyhzgqspfx Akysr • Frequency-controlled main drive • Multifix quick-change tool post, size C • Central lubrication for carriage, headstock, and feed gearbox • Coolant system • Safety chuck guard with interlock • Travelling chip guard and rear chip wall • CE marking and declaration of conformity • Machine color: RAL 7035 / RAL 7011 Options • FAGOR INNOVA 30iT digital readout

Condition: new, Year of construction: 2025, neu 2025 010105 prompt, Zwischenverkauf v Bulgarien 47390 € 905.15 € 1 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 M 21 20 - 2000 1/min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK Ncedpfjwiqz Djx Akyjr 2 mm 7.5 kW 3600 mm 1250 mm 1400 mm 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS (PRICES ON REQUEST): turning length 1.000 mm turning length 1.500 mm turning length 3.000 mm turning length 4.000 mm turning length 5.000 mm

Condition: used, Year of construction: 1990, saw blade diameter 400 mm cutting length 400 mm cutting diameter 130 mm Ncodpfxjuia Hrj Akyor speeds 9,5 - 48 U/min peripheral speed 12 - 60 m/min 130 mm 125 mm 400 x 125 mm 130 mm 110 mm rechts 200 x 125 mm links 280 x 125 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 2,0 x 1,7 m

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Nedpfx Aoxdi Ezskyocr Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: ready for operation (used), Jahns ARH-0-GM76C002-PPH-R2-400-LG600 engine with Stöber C002F0175D63K4 gearbox, serial no. according to photo,used, normal traces of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ncjdpfx Aei D Ixcskysr

Condition: refurbished (used), Year of construction: 2018, operating hours: 16,376 h, load capacity: 2,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,671 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers, fully maintained, tested, and reconditioned by us according to FEM-4.004 (UVV) standards. • Over 350 units in stock • Custom modifications of any kind possible upon customer request • International transport with suitable vehicles and customs processing upon request Ncodpjwzudyefx Akyjr • See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise • Full functionality as per FEM-4.004 • Inspected & tested (C5 test) batteries in electric equipment (minimum 70% capacity)

Condition: used, mileage: 124,525 km, power: 235 kW (319.51 HP), first registration: 05/2014, fuel type: diesel, empty load weight: 15,000 kg, maximum load weight: 11,000 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 1x comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off, AS-Tronic automatic, differential lock, fog lights, rotating beacon, air suspension, low-noise G1, lift+lower, last axle liftable, last axle hydr. steered, U-protection, aluminum side bumpers, roof hatch, green environmental badge Wheelbase: 3900 mm Superstructure: VDL Translift E-Maxx FS side-loader refuse collection body ZF 6 HP 602 i=5.6-0.83 transmission with retarder and EST146, MAN BrakeMatic, M cab, tank capacity: 200l. The engine power can be increased to 400 hp! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ncodpfx Akjvhirmeysr

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien Nedpfx Akowirghoyocr 107870 € 2038.74 € 800 mm 2000 mm 400 mm 260 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm 2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 107970 € 2040.63 € 800 mm 2000 mm 400 mm 3 mm 560 mm 560 mm 318 M 12 8 - 400 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 410 mm 0 mm 105 mm 6 MK 225 mm 11 kW 6100 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle, gripping range 250-380 mm. Option: hard top jaws with gripping range 250-500 mm 2 pcs. steady rests on supports Dm. 120 - 320 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Njdpfewiq E Asx Akyocr Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm Ncjdpjwiq Drefx Akysr 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 82740 € 1563.79 € 860 mm 3000 mm 430 mm 132 mm 620 mm 560 mm 11 140 M 17 7,5 - 1015 1/min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 - 2/3 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 3470 mm 1700 mm 1730 mm 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection Nedpswiq Rxsfx Akyscr safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 68 870,00 turning length2.000 mm € 71 780,00 turning length4.000 mm € 88 640,00 turning length5.000 mm € 101 200,00 turning length6.000 mm € 114 800,00