Plasma cutting machine

MGM Omnicut 4000

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet Nlsdpfsm Nb Rijx Ag Dea >capacity through spindle 60 mm >max. piece length 340 mm

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Nsdpfxsw Sdxao Ag Dola Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; Nsdpfemcw S Sjx Ag Djla 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Good working condition Nlsdpfxowpr Ufe Ag Dsa AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Year of construction: 2023, condition: new, functionality: fully functional, We are offering Brand new Kreuzmayr KEB 750 full fruit processing line which is located in Baku,Azerbaijan. All details you can find in document which will be included below. Nljdpfjuikf Esx Ag Dsa

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Nlsdpfeww Sy Djx Ag Dea Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Nsdpfx Agsxnb Uvs Djla Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: like new (used), Year of construction: 2006, machine/vehicle number: 184620, Control: Mazatrol 640 Nexus X-way: 560 mm Y-way: 410 mm Cdnxm9qiuu Z-way: 510 mm Table size: 900x410 mm Spindle cone: Sk40 Tool changer: 30 pl. Spindle speed: 12000 1/min IKZ: 15 bar Chip conveyour Machine weight: 5010 kg Nsdpfokn Dxqex Ag Dola

Year of construction: 2025, operating hours: 10 h, condition: as good as new (ex-display),

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Nlodpfxeq Htfne Ag Dja Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.